Publikationen 2011


Apel, D.; Klaus, M.; Genzel, Ch.; Balzar, D.: Rietveld refinement of energy-dispersive synchrotron measurements. Zeitschrift für Kristallographie 226 (2011), p. 934-943


Arlt, T.; Grothausmann, R.; Manke, I.; Markötter, H.; Krüger, P.; Hausmann, J.; Hilger, A.; Kardjilov, N.; Hartnig, C.; Kupsch, A.; Lange, A.; Hentschel, M.P.; Wippermann, K.; Banhart, J.: Tomographische Methoden für die Brennstoffzellenforschung. In: DGZfP-Jahrestagung 2011 Zerstörungsfreie Materialprüfung : 30. Mai - 1. Juni 2011, Bremen. 1 CD-ROM. Berlin: DGZfP. - ISBN 978-3-940283-33-7, p. [1-8]


Arlt, T.; Manke, I.; Wippermann, K.; Tötzke, C.; Markötter, H.; Riesemeier, H.; Mergel, J.; Banhart, J.: Investigation of the three-dimensional ruthenium distribution in fresh and aged membrane electrode assemblies with synchrotron X-ray absorption edge tomography. Electrochemistry Communications 13 (2011), p. 826-829
doi:10.1016/j.elecom.2011.05.013


Asher, R.J.; Lin, K.H.; Kardjilov, N.; Hautier, L.: Variability and constraint in the mammalian vertebral column. Journal of Evolutionary Biology 24 (2011), p. 1080-1090


Banhart, J.; Lay, M.D.H.; Chang, C.S.T.; Hill, A.J.: Kinetics of natural aging in Al-Mg-Si alloys studied by positron annihilation lifetime spectroscopy. Physical Review B 83 (2011), p. 014101/1-13
doi:10.1103/PhysRevB.83.014101


Bartmann, R.; Behr, N.; Hilger, A.; Krist, Th.: New solid state lens for reflective neutron focusing. Nuclear Instruments and Methods in Physics Research A 634 (2011), p. S104-S107
doi:10.1016/j.nima.2010.05.040


Boin, M.; Hilger, A.; Kardjilov, N.; Zhang, S.Y., Oliver, E.C.; James, J.A., Randau, C.; Wimpory, R.C.: Validation of Bragg edge experiments by Monte Carlo simulations for quantitative texture analysis. Journal of Applied Crystallography 44 (2011), p. 1040-1046
doi:10.1107/S0021889811025970


Brito, P.; Pinto, H.; Genzel, Ch.; Klaus, M.; Kaysser-Pyzalla, A.: Impact of transition oxides on growth stresses and texture of alumina scales formed during oxidation of iron aluminides. Scripta Materialia 65 (2011), p. 312-315
doi:10.1016/j.scriptamat.2011.04.039


Cassol Brunner, F.; Kardjilov, N.; Clémens, J.-C.; Morel, C.: Neutron imaging with the XPAD3-S hybrid pixel detector. Nuclear Instruments and Methods in Physics Research A 634 (2011), p. 85-90
doi:10.1016/j.nima.2011.01.077


Chang, C.S.T.; Banhart, J.: Low-temperature differential scanning calorimetry of an Al-Mg-Si alloy . Metallurgical and Materials Transactions A 42 (2011), p. 1960-1964
doi:10.1007/s11661-010-0596-5


Chethan, A.; García-Moreno, F.; Wanderka, N.; Murty, B.S.; Banhart,J.: Influence of oxides on the stability of zinc foam. Journal of Materials Science 46 (2011), p. 7806-7814


Dawson, M.; Kardjilov, N.; Manke, I.; Hilger, A.; Julien, D.; Bordenave, F.; Strobl, M.; Jericha, E.; Badurek, G.; Banhart, J.: Polarized neutron imaging using helium-3 cells and a polychromatic beam. Nuclear Instruments and Methods in Physics Research A 651 (2011), p. 140-144
doi:10.1016/j.nima.2011.02.013


Farajian, M.; Nitschke-Pagel, T.; Wimpory, R.C.; Hofmann, M.; Klaus, M.: Residual stress field determination in welds by means of X-ray, synchrotron and neutron diffraction. Materialwissenschaft und Werkstofftechnik 42 (2011), p. 996-1001
doi:10.1002/mawe.201100782


Fuß, T.; Wimpory, R.C.; Klaus, M.; Genzel, Ch.: Bridging gaps in surface zone residual stress analysis using complementary probes for strain depth profiling. Materials Science Forum 681 (2011), p. 411-416
doi:10.4028/www.scientific.net/MSF.681.411


Garcia-Moreno, F.; Solórzano, E.; Banhart, J.: Kinetics of coalescence in liquid aluminium foams. Soft Matter 7 (2011), p. 9216-9223


Geisler , M.; Reichenauer, G.; Dawson, M.; Kardjilov, N.; Ebert, H.-P.: Localisation of deposited filling gases (CO2) in cryogenic thermal insulation materials using neutron radiography. Cryogenics 51 (2011), p. 150-153
doi:10.1016/j.cryogenics.2011.01.004


Genzel, Ch.; Denks, I.A.; Coelho, R., Thomas, D.; Mainz, R.; Apel, D.; Klaus, M.: Exploiting the features of energy-dispersive synchrotron diffraction for advanced residual stress and texture analysis. Journal of Strain Analysis for Engineering Design 46 (2011), p. 615-625
doi:10.1177/0309324711403824


Genzel, Ch.; Krahmer, S.; Klaus, M.; Denks, I.A.: Energy-dispersive diffraction stress analysis under laboratory and synchrotron conditions: a comparative study. Journal of Applied Chystallography 44 (2011), p. 1-12


Gondek, L.; Selvaraj, N.B.; Czub, J.; Figiel, H.; Chapelle, D.; Kardjilov, N.; Hilger, A.; Manke, I.: Imaging of an operating LaNi4.8AIO.2 - based hydrogen storage container. International Journal of Hydrogen Energy 36 (2011), p. 9751-9757
doi:10.1016/j.ijhydene.2011.05.089


Grellet-Tinner, G.; Sim, C.M.; Kim, D.H.; Trimby, P.; Higa, A.; An, S.L.; Oh, H.S.; Kim, T.; Kardjilov, N.: Description of the first lithostrotian titanosaur embryo in ovo with Neutron characterization and implications for lithostrotian Aptian migration and dispersion. Gondwana Research 20 (2011), p. 621-629


Grothausmann, R.; Zehl, G.; Manke, I.; Fiechter, S.; Bogdanoff, P.; Dorbandt, I.; Kupsch, A.; Lange, A.; Hentschel, M.P.; Schumacher, G.; Banhart, J.: Quantitative structural assessment of heterogeneous catalysts by electron tomography. Journal of the American Chemical Society 133 (2011), p. 18161-18171
doi:10.1021/ja2032508


Grupp, R.; Nöthe, M.; Kieback, B.; Banhart, J.: Cooperative material transport during the early stage of sintering . Nature Communications 2 (2011), p. 298/1-6
doi:10.1038/ncomms1300


Hassomeris, O.; Schumacher, G.; Krüger, M.; Heilmaier, M.; Banhart, J.: Phase continuity in high temperature Mo-Si-B alloys: A FIB-Tomography Study. Intermetallics 19 (2011), p. 470-475
doi:10.1016/j.intermet.2010.11.003


Hautier, L.; Weisbecker, V.; Goswami, A.;. Knight, F.; Kardjilov, N.; Asher, R.J.: Skeletal ossification and sequence heterochrony in xenarthran evolution. Evolution and Development 13 (2011), p. 460-476


Helwig, H.-M.; Garcia-Moreno, F.; Banhart, J.: A study of Mg and Cu additions on the foaming behaviour of Al-Si alloys. Journal of Materials Science 46 (2011), p. 5227-5236
doi:10.1007/s10853-011-5460-5


Jiménez, C.; García-Moreno, F.; Pfretzschner, B.; Klaus, M.; Wollgarten, M.; Zizak, I.; Schumacher, G.; Tovar, M.; Banhart, J.: Decomposition of TiH2 studied in situ by synchrotron X-ray and neutron diffraction. Acta Materialia 59 (2011), p. 6318-6330
doi:10.1016/j.actamat.2011.06.042


Kardjilov, N.; Dawson, M.; Hilger, A.; Manke, I.; Strobl, M.; Penumadu, D.; Kim, F.H.; Garcia-Moreno, F.; Banhart, J.: A highly adaptive detector system for high resolution neutron imaging. Nuclear Instruments and Methods in Physics Research A 651 (2011), p. 95-99
doi:10.1016/j.nima.2011.02.084


Kardjilov, N.; Hilger, A.; Manke, I.; Strobl, M.; Dawson, M.; Williams, S.; Banhart, J.: Neutron tomography instrument CONRAD at HZB. Nuclear Instruments and Methods in Physics Research A 651 (2011), p. 47-52
doi:10.1016/j.nima.2011.01.067


Kardjilov, N.; Manke, I.; Hilger, A.;Strobl, M.; Banhart,J.: Neutron imaging in materials science. Materials Today 14 (2011), p. 248-256
doi:10.1016/S1369-7021(11)70139-0


Kim, F.; Penumadu, D.; Siriruk, A.; Bunn, J.; Kardjilov, N.: Three dimensional microstructure of polymeric composite materials used in sandwich structures using dual modality from combined high resolution x-ray and neutron tomography. In: Proceedings of the 18th International Conference on Composite Materials : ICCM 18, August 21 - 26,2011, Jeju Island, Korea. , 2011, p. [1-6]


Klaus, M.; Genzel, Ch.: Multilayer systems for cutting tools: On the relationship between coating design, surface processing, and residual stress. Advanced Engineering Materials 13 (2011), p. 845-850
doi:10.1002/adem.201000306


Krüger, Ph.; Markötter, H.; Haußmann, J.; , Klages, M.; Arlt, T.; Banhart. J.; Hartnig, Ch.; Manke, I.; Scholta, J.: Synchrotron X-ray tomography for investigations of water distribution in polymer electrolyte membrane fuel cells. Journal of Power Sources 196 (2011), p. 5250-5255
doi:10.1016/j.jpowsour.2010.09.042


Kuhn, R.; Scholta, J.; Krüger, Ph.; Hartnig, Ch.; Lehnert, W.; Arlt, T.; Manke, I.: Measuring device for synchrotron X-ray imaging and first results of high temperature polymer electrolyte membrane fuel cells. Journal of Power Sources 196 (2011), p. 5231-5239
doi:10.1016/j.jpowsour.2010.11.025


Kupsch, A.; Hentschel, M.P.; Lange, A.; Grothausmann, R.; Manke, I.: Application of the DIRECTT Algorithm to Sub-Nanometer Electron Tomography. In: International Symposium on Digital Industrial Radiology and Computed Tomography : June 20 - 22, 2011, Berlin, Germany. Berlin: DGZfP, 2011. - ISBN 978-3-940283-34-4, p. [1-6 CD-ROM]


Laaß, M.;Hampe, O.; Schudack, M.; Hoff, C.; Kardjilov, N.; Hilger, A.: New insights into the respiration and metabolic physiology of Lystrosaurus . Acta Zoologica 92 (2011), p. 363-371
doi:10.1111/j.1463-6395.2010.00467.x


Lange, A.; Kupsch, A.; Hentschel, M.P.; Manke, I.; Kardjilov, N.; Arlt, T.; Grothausmann, R.: Reconstruction of limited computed tomography data of fuel cell components using Direct Iterative Reconstruction of Computed Tomography Trajectories. Journal of Power Sources 196 (2011), p. 5293-5298
doi:10.1016/j.jpowsour.2010.10.106


Liu, Y.; Schumacher, G.; Zimmermann, S.; Banhart, J.: Devitrification of glassy Al85Ni10La5 powder by thermal treatment and ball-milling. Journal of Alloys and Compounds 509 [Suppl.1] (2011), p. 578-581
doi:10.1016/j.jallcom.2010.12.041


Maawad, E.; Brockmeier, H.G.; Wagner, L.; Sano, Y.; Genzel, Ch.: Investigation on the surface and near-surface characteristics of Ti-2.5Cu after various mechanical surface treatments. Surface and Coatings Technology 205 (2011), p. 3644-3650
doi:10.1016/j.surfcoat.2011.01.001


Maier, W.; Arlt, T.; Wippermann, K.; Wannek, C.; Manke, I.; Lehnert, W.; Stolten, D.: Investigation of HT-PEFCs by Means of Synchrotron X-ray Radiography and Electrochemical Impedance Spectroscopy. , 2011, p. 1413-1422


Manke, I.; Kardjilov, N.; Strobl, M.; Banhart, J.: Dreidimensionale Abbildung magnetischer Domänen. Physik in unserer Zeit 42 (2011), p. 59-60
doi:10.1002/piuz.201190008


Manke,I.; Markötter, H.; Tötzke, C.; Kardjilov, N.; Grothausmann, R.; Dawson, M.; Hartnig, C.; Haas, S.; Thomas, D.; Hoell, A.; Genzel, C.; Banhart, J.: Investigation of Energy-Relevant Materials with Synchrotron X-Rays and Neutrons. Advanced Engineering Materials 13 (2011), p. 712-729
doi:10.1002/adem.201000284


Markötter, H.; Arlt, T.; Krüger, P.; Haussmann, J.; Klages, M.; Scholta, J.; Riesemeier, H.; Banhart, J.; Manke, I.: Synchrotron-Röntgen-Radiographie und -Tomographie einer Brennstoffzelle. In: DGZfP-Jahrestagung 2011 Zerstörungsfreie Materialprüfung : 30. Mai - 1. Juni 2011, Bremen. 1 CD-ROM. Berlin: DGZfP, 2011. - ISBN 978-3-940283-33-7, p. [1-7]


Markötter, H.; Manke, I.; Krüger, P.; Arlt, T.; Haussmann, J.; Klages, M.; Riesemeier, H.; Hartnig, Ch.; Scholta, J.; Banhart, J.: Investigation of 3D water transport paths in gas diffusion layers by combined in-situ synchrotron X-ray radiography and tomography. Electrochemistry Communications 13 (2011), p. 1001-1004
doi:10.1016/j.elecom.2011.06.023


Matsushima, U.; Graf, W.; Zabler, S.; Manke, I.; Dawson, M.; Choinka, G.; Herppich, W.B.: 3-dimensional imaging of calcium oxalate crystals distribution in rose stems by syncrhrotron X-Ray tomography. In: CIGR International Symposium on "Sustainable Bioproduction - Water, Energy, and Food", CIGR2011. 19 - 23 September 2011, Tokyo, Japan. 1 CD-ROM. , 2011, p. [1-3]


Meagher, A.J.; Mukherjee, M.; Weaire, D.; Hutzler, S.; Banhart, J.; Garcia-Moreno, F.: Analysis of the internal structure of monodisperse liquid foams by X-ray tomography. Soft Matter 7 (2011), p. 9881-9885
doi:10.1039/c1sm05495c


Mousa, M.; Wanderka, N.; Timpel, M.; Singh, S.; Krüger, M.; Heilmaier, M.; Banhart,J.: Modification of Mo-Si alloy microstructure by small additions of Zr. Ultramicroscopy 111 (2011), p. 706-710
doi:10.1016/j.ultramic.2010.12.002


Mukherji, D.; Rösler, J.; Strunz, P.; Gilles, R.; Schumacher, G.; Piegert, S.: Beyond Ni-based superalloys: Development of CoRe-based alloys for gas turbine applications at very high temperatures. International Journal of Materials Research 102 (2011), p. 1125-1132
doi:10.3139/146.110563


Müller, J.; Hipsley, C.A.; Head, J.J.; Kardjilov, N.; Hilger, A.; Wuttke, M.; Reisz, R.R.: Eocene lizard from Germany reveals amphisbaenian origins. Nature 473 (2011), p. 364-367
doi:10.1038/nature09919


Oñorbe, E.; Garcés, G.; Pérz, P.; Cabezas, S.; Klaus, M.; Genzel, C.; Frutos, E.; Adeva, P.: The evolution of internal strain in Mg-Y-Zn alloys with a long period stacking ordered structure. Scripta Materialia 65 (2011), p. 719-722


Rebelo Kornmeier, J.; Gibmeier, J.; Hofmann, M.; Wimpory, R.C.: Neutron surface residual stress scanning using optimisation of a Si bent perfect crystal monochromator for minimising spurious strains . Materials Science Forum 681 (2011), p. 399-404
doi:10.4028/www.scientific.net/MSF.681.399


Robinson, J.S.; Tanner, D.A.; Truman, C.E.; Wimpory, R.C.: Measurement and prediction of machining induced redistribution of residual stress in the aluminium alloy 7449. Experimental Mechanics 51 (2011), p. 981-993
doi:10.1007/s11340-010-9389-4


Schulenburg, H.; Schwanitz, B.; Linse, N.; Scherer, G.G.; Wokaun, A.; Krbanjevic, J.; Grothausmann, R.; Manke, I.: 3D imaging of catalyst support corrosion in polymer electrolyte fuel cells. Journal of Physical Chemistry C 115 (2011), p. 14236-14243
doi:10.1021/jp203016u


Schöbel, M.; Jonke, J.; Degischer, H.P.; Hermann, A.; Brendel, A.; Wimpory, R.; Buslaps, T.: Thermal Cycling Stresses in W-Monofilament Reinforced Copper. Advanced Engineering Materials 13 (2011), p. 742-746
doi:10.1002/adem.201000309


Schöbel, M.; Jonke, J.; Degischer, H.P.; Paffenholz, V.; Brendel, A.; Wimpory, R.C.; Di Michiel, M.: Thermal fatigue damage in monofilament reinforced copper for heat sink applications in divertor elements. Journal of Nuclear Materials 409 (2011), p. 225-234
doi:10.1016/j.jnucmat.2010.12.242


Singh, S.; Wanderka, N.; Kiefer,K.; Siemensmeyer, K.; Banhart,J.: Effect of decomposition of the Cr-Fe-Co rich phase of AlCoCrCuFeNi high entropy alloy on magnetic properties. Ultramicroscopy 111 (2011), p. 619-622
doi:10.1016/j.ultramic.2010.12.001


Singh, S.; Wanderka, N.; Murty, B.S.; Glatzel, U.; Banhart, J.: Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy. Acta Materiala 59 (2011), p. 182-190
doi:10.1016/j.actamat.2010.09.023


Stocco, A.; Garcia-Moreno, F.; Manke, I.; Banhart, J.; Langevin, D.: Particle-stabilised foams: structure and aging. Soft Matter 7 (2011), p. 631-637
doi:10.1039/c0sm00166j


Strobl, M.; Hilger, A.; Boin, M.; Kardjilov, N.;Wimpory, R.; Clemens, D.; Mühlbauer, M.; Schillinger, B.; Wilpert, T.; Schulz, C.; Rolfs, K.; Davies, C.M.; O'Dowd, N.; Tiernan, P.; Manke, I.: Time-of-flight neutron imaging at a continuous source: Proof of principle using a scintillator CCD imaging detector. Nuclear Instruments and Methods in Physics Research A 651 (2011), p. 149-155
doi:10.1016/j.nima.2010.12.121


Strobl, M.; Kardjilov, N.; Hilger, A.; Penumadu, D.; Manke, I.: Advanced neutron imaging methods with a potential to benefic from pulsed sources. Nuclear Instruments and Methods in Physics Research A 651 (2011), p. 57-61
doi:10.1016/j.nima.2011.02.029


Strobl, M.; Pappas, C.; Hilger, A.; Wellert, S.; Kardjilov, N.; Seidel, S.O.; Manke, I.: Polarized neutron imaging: A spin-echo approach. Physica B 406 (2011), p. 2415-2418


Strunz, P.; Schumacher, G.; Klingelhöffer, H.; Wiedenmann, A.; Saroun, J.; Keiderling, U.: In situ observation of morphological changes of gamma-prime precipitates in a pre-deformed single-crystal Ni-base superalloy. Journal of Apllied Crystallography 44 (2011), p. 935-944
doi:10.1107/S0021889811028147


Tatchev, D.; Hoell, A.; Eichelbaum, M.; Rademann, K.: X-Ray-Assisted Formation of Gold Nanoparticles in Soda Lime Silicate Glass: Suppressed Ostwald Ripening. , 2011, p. 085702/1-4
doi:10.1103/PhysrevLett.106.085702


Thiedmann, R.; Manke, I.; Lehnert, W.; Schmidt, V.: Random geometric graphs for modelling the pore space of fibre-based materials. Journal of Materials Science 46 (2011), p. 7745-7759
doi:10.1007/s10853-011-5754-7


Thomas, D,; Mainz, R.; Rodriguez-Alvarez, H.; Marsen, B.; Abou-Ras, D.; Klaus, M.; Genzel, Ch.; Schock, H.-W.: In-situ studies of the recrystallization process of CuInS2 thin films by energy dispersive X-ray diffraction. Thin Solid Films 519 (2011), p. 7193-7196
doi:10.1016/j.tsf.2010.12.229


Timpel, M.; Wanderka, N.; Vinod Kumar, G.S.; Banhart, J.: Microstructural investigation of Sr-modified Al-15 wt%Si alloys in the range from micrometer to atomic scale. Ultramicroscopy 111 (2011), p. 695-700
doi:10.1016/j.ultramic.2010.12.023


Tremsin, A.S.; Kardjilov, N.; Dawson, M.; Strobl, M.; Manke, I.; McPhate, J.B:; Vallerga, J.V.; Siegmund, O.H.W.; Feller, W.B.: Scatter rejection in quantitative thermal and cold neutron imaging. Nuclear Instruments and Methods in Physics Research A 651 (2011), p. 145-148
doi:10.1016/j.nima.2011.01.066


Tremsin, A.S.; McPhate, J:B:; Vallerga, J.V.; Siegmund, O.H.W.; Feller, W.B:; Lehmann, E.; Butler, L.G.; Dawson, M.: High-resolution neutron microtomography with noiseless neutron counting detector. Nuclear Intruments and Methods in Physics Research A 652 (2011), p. 400-403


Tremsin, A.S.; McPhate, J:B:; Vallerga, J.V.; Siegmund, O.H.W.; Feller, W.B:; Lehmann, E.; Dawson, M.: Improved efficiency of high resolution thermal and cold neutron imaging. Nuclear Instruments and Methods in Physics Research A 628 (2011), p. 415-418
doi:10.1016/j.nima.2010.07.014


Tötzke, C.; Manke, I.; Hartnig, C.; Kuhn, R.; Riesemeier, H.; Banhart, J.: Investigation of carbon fiber gas diffusion layers by means of synchrotron X-ray tomography. ECS Transactions 41 (2011), p. 379-386


Tötzke, C.; Manke, I.; Hilger, A.; Choinka, G.; Kardjilov, N.; Arlt, T.; Markötter, H.; Schröder, A.; Wippermann, K.; Stolten, D.; Hartnig, C.; Krüger, P.; Kuhn, R.; Banhart, J.: Large area high resolution neutron imaging detector for fuel cell research. Journal of Power Sources 196 (2011), p. 4631-4637
doi:10.1016/j.jpowsour.2011.01.049


Vinod Kumar, G.S.; Charkraborty, M.; García-Moreno, F.; Banhart, J.: Foamability of MgAl2O4 (Spinel)-Reinforced Aluminum Alloy Composites. Metallurgical and Materials Transactions A 42 (2011), p. 2898-2908
doi:10.1007/s11661-011-0709-9


Wanderka, N.; Lazarev, N.; Chang, C.S.T.; Banhart, J.: Analysis of clustering in Al-Mg-Si alloy by density spectrum analysis of atom probe data. Ultramicroscopy 111 (2011), p. 701-705
doi:10.1016/j.ultramic.2010.11.022


Wimpory, R.C.; Boin, M.: Emphasizing the accuracy of the uncertainty of residual stress determination using neutron diffraction. Procedia Engineering 10 (2011), p. 1639-1644
doi:10.1016/j.proeng.2011.04.274


Witzmann, F.; Claeson, K.M.; Hampe, O.; Wieder, F.; Hilger, A.; Manke, I.; Niederhagen, M.; Rothschild, B.M.; Asbach, P.: Paget disease of bone in a Jurassic dinosaur. Current Biology 21 (2011), p. R647-R648
doi:10.1016/j.cub.2011.08.006


Wollgarten, M.: DiBaRT - DIscrete BAysian Reconstruction Technique - how to trust in tomographic reconstructions. In: MC 2011 Kiel : Microscopy Conference ; Kiel, Germany, 28 August - 2 September 2011. 1 CD-ROM. Kiel, 2011, p. [1-2]


Wollgarten, M.; Chang, C.S.T.; Duchstein, L.; Schumacher, G.; Banhart, J.: Quantitative investigation of precipitate growth during ageing of Al-(Mg, Si) alloys by energy-filtered electron diffraction. In: MC 2011 Kiel : Microscopy Conference ; Kiel, Germany, 28 August - 2 September 2011. 1 CD-ROM. , 2011, p. [1-2]


Woracek, R.; Penumadu, D.; Kardjilov, N.; Hilger, A.; Strobl, M.; Wimpory, R.C.; Manke, I.; Banhart, J.: Neutron Bragg-edge-imaging for strain mapping under in situ tensile loading . Journal of Apllied Physics 109 (2011), p. 093506/1-4
doi:10.1063/1.3582138


Zay, K.; Maawad, E.; Brokmeier, H.-G.; Wagner, L.; Genzel, Ch.: Influence of mechanical surface treatments on the high cycle fatigue performance of TIMETAL 54M. Materials Science and Engineering A 528 (2011), p. 2554-2558
doi:10.1016/j.msea.2010.12.064


Kupsch, A.; Lange, M.; Hentschel, M.P.; Grothausmann, R.; Manke, I.: Verbesserte Elektronen-Tomographie mittels DIRECTT-Algorithmus. In: DGZfP-Jahrestagung 2011 Zerstörungsfreie Materialprüfung : 30. Mai - 1. Juni 2011, Bremen. 1 CD-ROM. Berlin: DGZfP, 2011. - ISBN 978-3-940283-33-7, p. [1-7]