Öffnet in neuem Fenster Opens in a new window Öffnet externe Seite Opens an external site Öffnet externe Seite in neuem Fenster Opens an external site in a new window

Publications with EDDI data

2020

  • “Stress Formation During In-Ga Interdiffusion in Thin-Film CuIn1-xGaxSe2 Absorber Layers Leads to Stable Ga Gradients” Schäfer, S.; Stange, H.; Márquez, J.A.; Genzel, C.; Mainz, R. (2020) Physical Review Applied 14, 024063/1-17. doi:10.1103/physrevapplied.14.024063

  • “High-temperature decomposition of Cu2BaSnS4 with Sn loss reveals newly identified compound Cu2Ba3Sn2S8 Márquez, J.A.; Sun, J.P.; Stange, H.; Ali, H.; Choubrac, L.; Schäfer, S.; Hages, C.J.; Leifer, K.; Unold, T.; Mitzi, D.B.; Mainz, R. (2020) Journal of Materials Chemistry A 8, 11346-11353. doi:10.1039/d0ta02348e

  • "Reaction Pathway for Efficient Cu2ZnSnSe4 Solar Cells from Alloyed Cu-Sn Precursor via a Cu-Rich Selenization Stage“ Pareek, D.; Taskesen, T.; Márquez, J.A.; Stange, H.; Levcenco, S.; Simsek, I.; Nowak, D.; Pfeiffelmann, T.; Chen, W.; Stroth, C.; Sayed, M.H.; Mikolajczak, U.; Parisi, J.; Unold, T.; Mainz, R.; Gütay, L. (2020) Solar RRL 4, 2000124/1-8. doi:10.1002/solr.202000124

  • “Investigation of near-stoichiometric polycrystalline CuInSe2 thin films by photoreflectance spectroscopy” Levcenko, S.; Stange, H.; Choubrac, L.; Greiner, D.; Heinemann, M.D.; Mainz, R.; Unold, T. (2020) Journal of Applied Physics 127, 125701/1-6. doi:10.1063/1.5145208

  • "Radiative recombination properties of near-stoichiometric CuInSe2 thin films” Levcenko, S.; Stange, H.; Choubrac, L.; Greiner, D.; Heinemann, M.D.; Mainz, R.; Unold, T. (2020) Physical Review Materials 4, 064605. doi:10.1103/physrevmaterials.4.064605

  • “The residual stress in as-built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure” Serrano-Munoz, I., Mishurova, T., Thiede, T., Sprengel, M., Kromm, A., Nadammal, N., Nolze, G., Saliwan-Neumann, R., Evans, A., & Bruno, G. (2020). Sci. Rep. 10(1), 14645. doi: 10.1038/s41598-020-71112-9
  • “A multiscale analysis of additively manufactured lattice structures” Thiede, T. (2020). Thesis, Universität Potsdam. doi: 10.25932/publishup-47041

2019

  • “Phase and film formation pathway for vacuum-deposited Cu2BaSn(S,Se)4 absorber layers” Sun, J.; Márquez, J.; Stange, H.; Mainz, R.; Mitzi, D. (2019) Physical Review Materials 3,  055402/1-7. doi:10.1103/PhysRevMaterials.3.055402

  •  “Real-Time Observation of High-Temperature Gas Corrosion in Dry and Wet SO 2 -Containing Atmosphere” Falk, F., Menneken, M., & Stephan-Scherb, C. (2019). Jom 71(4), 1560–1565. doi: 10.1007/s11837-019-03335-9
  • “Selenization of CuInS 2 by rapid thermal processing-an alternative approach to induce a band gap grading in chalcopyrite thin-film solar cell absorbers?” Félix, R., Weber, A., Zander, O., Rodriguez-Álvarez, H., Schubert, B. A., Klaer, J., Wilks, R. G., Schock, H. W., Mainz, R., & Bär, M. (2019). J. Mater. Chem. A 7(5), 2087–2094. doi: 10.1039/c8ta10823d
  • “Reassessment of evaluation methods for the analysis of near-surface residual stress fields using energydispersive diffraction” Klaus, M. & Genzel, C. (2019). J. Appl. Crystallogr. 52(1), 94–105. doi: 10.1107/S1600576718018095
  • “New aspects about the search for the most relevant parameters optimizing SLM materials” Mishurova, T., Artzt, K., Haubrich, J., Requena, G., & Bruno, G. (2019). Addit. Manuf. 25, 325–334. doi: 10.1016/j.addma.2018.11.023
  • “Exploring the Correlation between Subsurface Residual Stresses and Manufacturing Parameters in Laser Powder Bed Fused Ti-6Al-4V” Mishurova, T., Artzt, K., Haubrich, J., Requena, G., & Bruno, G. (2019). Metals (Basel). 9(2), 261. doi: 10.3390/met9020261
  • “From pnCCD to pnCCD + CsI(Tl) scintillator: characterizations and applications” Shokr, M. M. (2019). Thesis. Universität Siegen.
  • “Energy-dispersive Laue diffraction by means of a pnCCD detector coupled to a CsI(Tl) scintillator using ultra-hard X-ray synchrotron radiation” Shokr, M., Tosson, A., Abboud, A., Algashi, A., Schlosser, D., Hartmann, R., Klaus, M., Genzel, C., Strüder, L., & Pietsch, U. (2019). J. Synchrotron Radiat. 26(5), 1612–1620. doi: 10.1107/S160057751900626X
  • “Stacking fault reduction during annealing in Cu-poor CuInSe 2 thin film solar cell absorbers analyzed by in situ XRD and grain growth modeling” Stange, H., Brunken, S., Greiner, D., Heinemann, M. D., Barragan Yani, D. A., Wägele, L. A., Li, C., Simsek Sanli, E., Kahnt, M., Schmidt, S. S., Bäcker, J. P., Kaufmann, C. A., Klaus, M., Scheer, R., Genzel, C., & Mainz, R. (2019). J. Appl. Phys. 125(3), 035303. doi: 10.1063/1.5052245
  • “In situ synchrotron stress mappings to characterize overload effects in fatigue crack growth” Thielen, M., Schaefer, F., Gruenewald, P., Laub, M., Marx, M., Meixner, M., Klaus, M., & Motz, C. (2019). Int. J. Fatigue 121, 155–162. doi: 10.1016/j.ijfatigue.2018.12.013
  • “EDLD-Tool : A real-time GPU-based tool to stream and analyze energy-dispersive Laue diffraction of BIG Data sets collected by a pnCCD” Tosson, A., Shokr, M., Abboud, A., Bebawy, Y., Algashi, A., Hartmann, R., Klaus, M., Genzel, C., Strüder, L., & Pietsch, U. (2019). J. Instrum. 14(01), P01008–P01008. doi: 10.1088/1748-0221/14/01/P01008

2018

  •  “Influence of the irradiation in cement for the Brazilian radioactive waste repositories: Characterization via X-ray diffraction, X-ray tomography and quasielastic neutron scattering” Alvares Ferreira, E. G., Yokaichiya, F., Marumo, J. T., Vicente, R., Garcia-Moreno, F., Kamm, P. H., Klaus, M., Russina, M., Gunther, G., Jimenez, C. E., & Franco, M. K. K. D. (2018). Phys. B Condens. Matter 551, 256–261. doi: 10.1016/j.physb.2018.01.018
  • “Residual stress analysis of energy-dispersive diffraction data using a two-detector setup: Part I — Theoretical concept” Apel, D., Meixner, M., Liehr, A., Klaus, M., Degener, S., Wagener, G., Franz, C., Zinn, W., Genzel, C., & Scholtes, B. (2018). Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip. 877, 24–33. doi: 10.1016/j.nima.2017.09.005
  • “Residual stress analysis of energy-dispersive diffraction data using a two-detector setup: Part II — Experimental implementation” Apel, D., Meixner, M., Liehr, A., Klaus, M., Degener, S., Wagener, G., Franz, C., Zinn, W., Genzel, C., & Scholtes, B. (2018). Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip. 877, 56–64. doi: 10.1016/j.nima.2017.09.006
  • “Nanoclay intercalation during foaming of polymeric nanocomposites studied in-situ by synchrotron X-ray diffraction” Bernardo, V., Mugica, M., Perez-Tamarit, S., Notario, B., Jimenez, C., & Rodriguez-Perez, M. A. (2018). Materials (Basel). 11(12). doi: 10.3390/ma11122459
  • „Wärmeführung und Beanspruchung von hochfesten Verbindungen mit LTT-Schweißzusatzwerkstoff“ Dixneit, J. (2018). Thesis, Otto-von-Guericke-Universität Magdeburg. doi: 10.25673/13465
  • “Residual stress and yield strength evolution with annealing treatments in an age-hardenable aluminum alloy matrix composite” Fernández, R., Cabeza, S., Mishurova, T., Fernández-Castrillo, P., González-Doncel, G., & Bruno, G. (2018). Mater. Sci. Eng. A 731, 344–350. doi: 10.1016/j.msea.2018.06.031
  • “A multi-scale analysis of the residual stresses developed in a single-phase alloy cylinder after quenching” Fernández, R., Ferreira-Barragáns, S., Ibáñez, J., & González-Doncel, G. (2018). Mater. Des. 137, 117–127. doi: 10.1016/j.matdes.2017.10.013
  • “Combination of in-situ diffraction experiments and acoustic emission testing to understand the compression behavior of Mg-YZn alloys containing LPSO phase under different loading conditions” Garcés, G., Máthis, K., Medina, J., Horváth, K., Drozdenko, D., Oñorbe, E., Dobroň, P., Pérez, P., Klaus, M., & Adeva, P. (2018). Int. J. Plast. 106, 107–128. doi: 10.1016/j.ijplas.2018.03.004
  • “Time-resolved in situ tomography for the analysis of evolving metal-foam granulates” García-Moreno, F., Kamm, P. H., Neu, T. R., & Banhart, J. (2018, September 1). J. Synchrotron Radiat. Vol. 25, pp. 1505–1508. doi: 10.1107/S1600577518008949
  • “Simultaneous X-ray radioscopy/tomography and energy-dispersive diffraction applied to liquid aluminium alloy foams” Jiménez, C., Paeplow, M., Kamm, P. H., Neu, T. R., Klaus, M., Wagener, G., Banhart, J., Genzel, C., & García-Moreno, F. (2018). J. Synchrotron Radiat. 25(6), 1790–1796. doi: 10.1107/S1600577518011657
  • “Defect Annihilation by Preferential Grain Growth during Cu(In,Ga)Se 2 Co-evaporation” Mainz, R., Stange, H., & Kaufmann, C. A. (2018). 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion, WCPEC 2018 - A Joint Conference of 45th IEEE PVSC, 28th PVSEC and 34th EU PVSEC, 3875–3879. doi: 10.1109/PVSC.2018.8547783
  • “A multireflection and multiwavelength residual stress determination method using energy dispersive diffraction” Marciszko, M., Baczmański, A., Klaus, M., Genzel, C., Oponowicz, A., Wroński, S., Wróbel, M., Braham, C., Sidhom, H., & Wawszczak, R. (2018). J. Appl. Crystallogr. 51(3), 732–745. doi: 10.1107/S1600576718004193
  • “Phase Transformations in Supermartensitic Stainless Steels” Nießen, F. (2018). Thesis. Technical University of Denmark.
  • “Visualisation of deformation gradients in structural steel by macroscopic magnetic domain distribution imaging (Bitter technique)” Sonntag, N., Cabeza, S., Kuntner, M., Mishurova, T., Klaus, M., Kling e Silva, L., Skrotzki, B., Genzel, C., & Bruno, G. (2018). Strain 54(6), e12296. doi: 10.1111/str.12296
  • „Analyse der Mikrostrukturentwicklung von CuInSe2 mittels in-situ Röntgenbeugung“ Stange, H. (2018). Thesis. TU Berlin.
  • “Real time observation of high temperature oxidation and sulfidation of Fe-Cr model alloys” Stephan-Scherb, C., Nützmann, K., Kranzmann, A., Klaus, M., & Genzel, C. (2018). Mater. Corros. 69(6), 678–689. doi: 10.1002/maco.201709892
  • “Correlating Morphological Evolution of Li Electrodes with Degrading Electrochemical Performance of Li/LiCoO2 and Li/S Battery Systems: Investigated by Synchrotron X-ray Phase Contrast Tomography” Sun, F., Osenberg, M., Dong, K., Zhou, D., Hilger, A., Jafta, C. J., Risse, S., Lu, Y., Markötter, H., & Manke, I. (2018). ACS Energy Lett. 3(2), 356–365. doi: 10.1021/acsenergylett.7b01254
  • “In Situ Investigation of the Evolution of Lattice Strain and Stresses in Austenite and Martensite During Quenching and Tempering of Steel” Villa, M., Niessen, F., & Somers, M. A. J. (2018). Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 49(1), 28–40. doi: 10.1007/s11661-017-4387-0
  • “Advanced characterization and in-situ growth monitoring of Cu(In,Ga)Se2 thin films and solar cells” Abou-Ras, D.; Bär, M.; Caballero, R.; Gunder, R.; Hages, C.; Heinemann, M.D.; Kaufmann, C.A.; Krause, M.; Levcenco, S.; Mainz, R.; Márquez, J.; Nikolaeva, A.; Redinger, A.; Schäfer, N.; Schorr, S.; Stange, H.; Unold, T.; Wilks, R.G. (2018) Solar Energy 170, 102-112. doi:10.1016/j.solener.2018.04.032

2017

  •  “Analysis of Residual Stresses in Laser-Shock-Peened and Shot-Peened Marine Steel Welds” Ahmad, B. & Fitzpatrick, M. E. (2017). Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 48(2), 759–770. doi: 10.1007/s11661-016-3867-y
  • “Thermal expansion of Ti-Al-N and Cr-Al-N coatings” Bartosik, M., Holec, D., Apel, D., Klaus, M., Genzel, C., Keckes, J., Arndt, M., Polcik, P., Koller, C. M., & Mayrhofer, P. H. (2017). Scr. Mater. 127, 182–185. doi: 10.1016/j.scriptamat.2016.09.022
  • “Near-surface and depth-dependent residual stress evolution in a piston ring hard chrome coating induced by sliding wear and friction” Biberger, J., Füßer, H. J., Klaus, M., & Genzel, C. (2017). Wear 376377, 1502–1521. doi: 10.1016/j.wear.2017.01.056
  • “Overview of In Situ X-Ray Studies of Light Alloy Solidification in Microgravity” Browne, D. J., García-Moreno, F., Nguyen-Thi, H., Zimmermann, G., Kargl, F., Mathiesen, R. H., Griesche, A., & Minster, O. (2017). In Journal of Chemical Information and Modeling (Vol. 53, pp. 581–590). doi: 10.1007/978-3-319-52392-7_80
  • “Numerical and experimental investigations on shot-peened high-strength steel by means of hole drilling, X-ray, synchrotron and neutron diffraction analysis” Farajian, M., Hardenacke, V., Pfeiffer, W., Klaus, M., & Kornmeier, J. R. (2017). Mater. Test. 59(2), 161–165. doi: 10.3139/120.110978
  • “Residual Stress Analysis by Energy-Dispersive Synchrotron X-ray Diffraction” Genzel, C. & Klaus, M. (2017). In Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications: Second Edition (pp. 161–177). doi: 10.1002/9783527684489.ch9
  • “Local residual stress depth distribution in the inner gearing of a case hardened sliding collar” Gibmeier, J., Rebelo-Kornmeier, J., & Strauss, T. (2017). Mater. Sci. Forum 879, 601–606. doi: 10.4028/www.scientific.net/MSF.879.601
  • “Evolution of opto-electronic properties during film formation of complex semiconductors” Heinemann, M. D., Mainz, R., Österle, F., Rodriguez-Alvarez, H., Greiner, D., Kaufmann, C. A., & Unold, T. (2017). Sci. Rep. 7, 48463 1–9. doi: 10.1038/srep45463
  • “Fast Synchrotron X-Ray Tomography of Dynamic Processes in Liquid Aluminium Alloy Foam” Kamm, P. H., García-Moreno, F., Neu, T. R., Heim, K., Mokso, R., & Banhart, J. (2017). Adv. Eng. Mater. 19(11), 1. doi: 10.1002/adem.201600550
  • “Residual Stresses in Thin Films and Coated Tools: Challenges and Strategies for Their Nondestructive Analysis by X-ray Diffraction Methods” Klaus, M. & Genzel, C. (2017). In Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications: Second Edition (pp. 439–449). doi: 10.1002/9783527684489.ch24
  • “Nondestructive separation of residual stress and composition gradients in thin films by angle-and energy-dispersive X-ray diffraction. I. Theoretical concepts” Klaus, M. & Genzel, C. (2017). J. Appl. Crystallogr. 50(1), 252–264. doi: 10.1107/S1600576716020598
  • “Nondestructive separation of residual stress and composition gradients in thin films by angle-and energy-dispersive X-ray diffraction. I. Theoretical concepts” Klaus, M. & Genzel, C. (2017). J. Appl. Crystallogr. 50(1), 252–264. doi: 10.1107/S1600576716020598
  • „Beitrag zur randnahen Struktur- und Eigenspannungsanalyse in polykristallinen Werkstoffen mit energiedispersiven röntgenografischen Verfahren“ Liehr, A. (2017). Thesis. Universität Kassel.
  • „Chemistry and Dynamics of Ge in Kesterite: Toward Band-Gap-Graded Absorbers“ Márquez, J., Stange, H., Hages, C. J., Schaefer, N., Levcenko, S., Giraldo, S., Saucedo, E., Schwarzburg, K., Abou-Ras, D., Redinger, A., Klaus, M., Genzel, C., Unold, T., & Mainz, R. (2017). Chem. Mater. Vol. 29, pp. 9399–9406. doi: 10.1021/acs.chemmater.7b03416
  • “An assessment of subsurface residual stress analysis in SLM Ti-6Al-4V” Mishurova, T., Cabeza, S., Artzt, K., Haubrich, J., Klaus, M., Genzel, C., Requena, G., & Bruno, G. (2017). Materials (Basel). 10(4), 1–14. doi: 10.3390/ma10040348
  • “In situ techniques for the investigation of the kinetics of austenitization of supermartensitic stainless steel” Nießen, F., Villa, M., Apel, D., Keßler, O., Reich, M., Hald, J., & Somers, M. A. J. (2017). In Materials Science Forum (Vol. 879, pp. 1381–1386). doi: 10.4028/www.scientific.net/MSF.879.1381
  • “Kinetics analysis of two-stage austenitization in supermartensitic stainless steel” Niessen, F., Villa, M., Hald, J., & Somers, M. A. J. (2017). Mater. Des. 116, 8–15. doi: 10.1016/j.matdes.2016.11.076
  • “Compressive residual stresses and associated surface modifications induced in Ti6Al4V by laser shock processing” Ocaña, J. L., González-Carrasco, J. L., Lieblich, M., Barriuso, S., Porro, J. A., Ruiz de Lara, L., Díaz, M., & Santiago, J. A. (2017). Mater. Sci. Forum 879, 1408–1413. doi: 10.4028/www.scientific.net/MSF.879.1408
  • “Complementary Methods for the Characterization of Corrosion Products on a Plant-Exposed Superheater Tube” Okoro, S. C., Niessen, F., Villa, M., Apel, D., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2017). Metallogr. Microstruct. Anal. 6(1), 22–35. doi: 10.1007/s13632-016-0325-6
  • “Applications of a pnCCD detector coupled to columnar structure CsI(Tl) scintillator system in ultra high energy X-ray Laue diffraction” Shokr, M., Schlosser, D., Abboud, A., Algashi, A., Tosson, A., Conka, T., Hartmann, R., Klaus, M., Genzel, C., Strüder, L., & Pietsch, U. (2017). J. Instrum. 12(12), 12032 1–14 10 1088 1748–0221 12 12 12032. doi: 10.1088/1748-0221/12/12/P12032
  • “Evaluation of high spatial resolution imaging of magnetic stray fields for early damage detection” Stegemann, R., Cabeza, S., Pelkner, M., Lyamkin, V., Sonntag, N., Bruno, G., Skrotzki, B., & Kreutzbruck, M. (2017). AIP Conference Proceedings, 1806. doi: 10.1063/1.4974688
  • “Study of the Mechanisms of Internal Short Circuit in a Li/Li Cell by Synchrotron X-ray Phase Contrast Tomography” Sun, F., Moroni, R., Dong, K., Markötter, H., Zhou, D., Hilger, A., Zielke, L., Zengerle, R., Thiele, S., Banhart, J., & Manke, I. (2017). In ACS Energy Letters (Vol. 2, pp. 94–104). doi: 10.1021/acsenergylett.6b00589
  • “Effect of Treatment Area on Residual Stress and Fatigue in Laser Peened Aluminum Sheets” Toparli, M. B., Smyth, N., & Fitzpatrick, M. E. (2017). Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 48(4), 1519–1523. doi: 10.1007/s11661-017-3962-8

2016

  •  “The crystallographic template effect assisting the formation of stable α-Al2O3 during low temperature oxidation of Fe-Al alloys” Brito, P., Pinto, H., & Kostka, A. (2016). Corros. Sci. 105, 100–108. doi: 10.1016/j.corsci.2016.01.007
  • “Residual stress in nano-structured stainless steel (AISI 316L) prompted by Xe+ ion bombardment at different impinging angles” Cucatti, S., Droppa, R., Figueroa, C. A., Klaus, M., Genzel, C., & Alvarez, F. (2016). J. Appl. Phys. 120(14). doi: 10.1063/1.4964429
  • “Characterization of nanoclay intercalation during foaming with in situ energy-dispersive X-ray diffraction” Escudero, J., Notario, B., Jimenez, C., & Rodriguez-Perez, M. A. (2016). J. Appl. Polym. Sci. 133(20). doi: 10.1002/app.43432
  • “Effect of reinforcing shape on twinning in extruded magnesium matrix composites” Garcés, G., Máthis, K., Pérez, P., Čapek, J., & Adeva, P. (2016). Mater. Sci. Eng. A 666, 48–53. doi: 10.1016/j.msea.2016.04.028
  • “In-situ high temperature stress analysis of Ti(C,N) coatings on functionally graded cemented carbides by energy dispersive synchrotron X-ray diffraction” García, J., Pinto, H., Ramos-Moore, E., Espinoza, C., Östby, J., & Coelho, R. (2016). Int. J. Refract. Met. Hard Mater. 56, 27–34. doi: 10.1016/j.ijrmhm.2015.12.001
  • “In situ monitoring and ex situ TEM analyses of spinel (MgAl2O 4) growth between (111)-oriented periclase (MgO) substrates and Al2O 3 thin films” Götze, L. C., Milke, R., Zizak, I., & Wirth, R. (2016). J. Mater. Sci. 51(19), 8824–8844. doi: 10.1007/s10853-016-0130-2
  • “The 7T-MPW-EDDI beamline at BESSY II” Klaus, M. & Garcia-Moreno, F. (2016). J. Large-Scale Res. Facil. JLSRF 2. doi: 10.17815/jlsrf-2-63
  • “On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening” Lieblich, M., Barriuso, S., Ibáñez, J., Ruiz-de-Lara, L., Díaz, M., Ocaña, J. L., Alberdi, A., & González-Carrasco, J. L. (2016). J. Mech. Behav. Biomed. Mater. 63, 390–398. doi: 10.1016/j.jmbbm.2016.07.011
  • “Erratum: Sudden stress relaxation in compound semiconductor thin films triggered by secondary phase segregation (Physical Review B - Condensed Matter and Materials Physics(2015) 92 (155310) DOI 10.1103/PhysRevB.92.155310)” Mainz, R., Rodriguez-Alvarez, H., Klaus, M., Thomas, D., Lauche, J., Weber, A., Heinemann, M. D., Brunken, S., Greiner, D., Kaufmann, C. A., Unold, T., Schock, H. W., & Genzel, C. (2016, April 6). Phys. Rev. B Vol. 93. doi: 10.1103/PhysRevB.93.159902
  • “Annihilation of structural defects in chalcogenide absorber films for high-efficiency solar cells” Mainz, R., Simsek Sanli, E., Stange, H., Azulay, D., Brunken, S., Greiner, D., Hajaj, S., Heinemann, M. D., Kaufmann, C. A., Klaus, M., Ramasse, Q. M., Rodriguez-Alvarez, H., Weber, A., Balberg, I., Millo, O., Van Aken, P. A., & Abou-Ras, D. (2016). Energy Environ. Sci. 9(5), 1818–1827. doi: 10.1039/c6ee00402d
  • In Situ Techniques for the Investigation of the Kinetics of Austenitization of Supermartensitic Stainless Steel” Nießen, F., Villa, M., Apel, D., Keßler, O., Reich, M., Hald, J., & Somers, M. A. J. (2016). Mater. Sci. Forum 879, 1381–1386. doi: 10.4028/www.scientific.net/MSF.879.1381
  • “In Situ Real-Time Characterization of Thin-Film Growth” Pistor, P., Mainz, R., Heinemann, M. D., Unold, T., & Scheer, R. (2016). In Advanced Characterization Techniques for Thin Film Solar Cells: Second Edition (Vol. 2–2, pp. 441–467). doi: 10.1002/9783527699025.ch16
  • “In-situ digital image correlation for fracture analysis of oxides formed on zirconium alloys” Platt, P., Lunt, D., Polatidis, E., Wenman, M. R., & Preuss, M. (2016). Corros. Sci. 111, 344–351. doi: 10.1016/j.corsci.2016.05.026
  • “Application of a pnCCD for energy-dispersive Laue diffraction with ultra-hard X-rays” Send, S., Abboud, A., Wiesner, N., Shokr, M., Klaus, M., Genzel, C., Conka-Nurdan, T., Schlosser, D., Huth, M., Hartmann, R., Strüder, L., & Pietsch, U. (2016). J. Appl. Crystallogr. 49, 222–233. doi: 10.1107/S1600576715023997
  • “Diffusion-induced grain boundary migration as mechanism for grain growth and defect annihilation in chalcopyrite thin films” Stange, H., Brunken, S., Greiner, D., Heinemann, M. D., Kaufmann, C. A., Schmidt, S. S., Bäcker, J. P., Klaus, M., Genzel, C., & Mainz, R. (2016). Acta Mater. 111, 377–384. doi: 10.1016/j.actamat.2016.03.073

2015

  •  “Polychromatic X-ray diffraction using a pnCCD : applications for material science” Abboud, A. (2015). Thesis, Universität Siegen. https://dspace.ub.uni-siegen.de/handle/ubsi/914
  • “The role of interparticle heterogeneities in the selenization pathway of Cu-Zn-Sn-S nanoparticle thin films: a real-time study” Carter, N. J., Mainz, R., Walker, B. C., Hages, C. J., Just, J., Klaus, M., Schmidt, S. S., Weber, A., Yang, W. C. D., Zander, O., Stach, E. A., Unold, T., & Agrawal, R. (2015). J. Mater. Chem. C 3(27), 7128–7134. doi: 10.1039/c5tc01139f
  • “Hydrogen Interaction with Supermartensitic Stainless Steel studied by Energy Dispersive X-Ray Diffraction” Dabah, E. (2015). Thesis, Otto-von-Guericke-Universität Magdeburg. doi: 10.25673/4274
  • “Evaluation of the Abnormal Grain Growth in an ASTM 213 Grade T91 Steel.” Gibson, J. L., Jiménez, C., Andrés, C. G. de, Danón, C. A., & Luppo, M. I. (2015). Procedia Mater. Sci. 8, 1118–1126. doi: 10.1016/j.mspro.2015.04.175
  • „Preferential {100} grain orientation in 10 micrometer-thick laser crystallized multicrystalline silicon on glass“ Kühnapfel, S., Nickel, N. H., Gall, S., Klaus, M., Genzel, C., Rech, B., & Amkreutz, D. (2015). Thin Solid Films 576, 68–74. doi: 10.1016/j.tsf.2015.01.006
  • “In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg-Li-(Al) alloys: An uncommon tension-compression asymmetry” Lentz, M., Klaus, M., Beyerlein, I. J., Zecevic, M., Reimers, W., & Knezevic, M. (2015). Acta Mater. 86, 254–268. doi: 10.1016/j.actamat.2014.12.003
  • “Effect of age hardening on the deformation behavior of an Mg-Y-Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling” Lentz, M., Klaus, M., Wagner, M., Fahrenson, C., Beyerlein, I. J., Zecevic, M., Reimers, W., & Knezevic, M. (2015). Mater. Sci. Eng. A 628, 396–409. doi: 10.1016/j.msea.2015.01.069
  • “Sudden stress relaxation in compound semiconductor thin films triggered by secondary phase segregation” Mainz, R., Rodriguez-Alvarez, H., Klaus, M., Thomas, D., Lauche, J., Weber, A., Heinemann, M. D., Brunken, S., Greiner, D., Kaufmann, C. A., Unold, T., Schock, H. W., & Genzel, C. (2015). Phys. Rev. B - Condens. Matter Mater. Phys. 92(15). doi: 10.1103/PhysRevB.92.155310
  • “Time-resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors” Mainz, R., Weber, A., Rodriguez-Alvarez, H., Levcenko, S., Klaus, M., Pistor, P., Klenk, R., & Schock, H. W. (2015). Prog. Photovoltaics Res. Appl. 23(9), 1131–1143. doi: 10.1002/pip.2531
  • “Diffraction analysis of strongly inhomogeneous residual stress depth distributions by modification of the stress scanning method. I. Theoretical concept” Meixner, M., Fuss, T., Klaus, M., & Genzel, C. (2015). J. Appl. Crystallogr. 48, 1451–1461. doi: 10.1107/S160057671501448X
  • “Diffraction analysis of strongly inhomogeneous residual stress depth distributions by modification of the stress scanning method. II. Experimental implementation“ Meixner, M., Fuss, T., Klaus, M., Genzel, M., & Genzel, C. (2015). J. Appl. Crystallogr. 48, 1462–1475. doi: 10.1107/S160057671501585X
  • “A study into stress relaxation in oxides formed on zirconium alloys” Platt, P., Polatidis, E., Frankel, P., Klaus, M., Gass, M., Howells, R., & Preuss, M. (2015). J. Nucl. Mater. 456, 415–425. doi: 10.1016/j.jnucmat.2014.09.072
  • “High mobility In2O3:H as contact layer for a-Si:H/c-Si heterojunction and μc-Si:H thin film solar cells” Scherg-Kurmes, H., Körner, S., Ring, S., Klaus, M., Korte, L., Ruske, F., Schlatmann, R., Rech, B., & Szyszka, B. (2015). Thin Solid Films, 594, 316–322. doi: 10.1016/j.tsf.2015.03.022
  • “pnCCD Response to Hard X-ray Radiation” Shokr, M. (2015). Thesis. Universität Siegen.
  • “A parametric study of laser spot size and coverage on the laser shock peening induced residual stress in thin aluminium samples” Sticchi, M., Staron, P., Sano, Y., Meixer, M., Klaus, M., Rebelo-Kornmeier, J., Huber, N., & Kashaev, N. (2015). J. Eng. 2015(13), 97–105. doi: 10.1049/joe.2015.0106
  • “Analysis of residual stresses and wear mechanism of HF-CVD diamond coated cemented carbide tools” Uhlmann, E., Sammler, F., Meixner, M., Heinrich, D., Gansert, F., Reimers, W., Berger, D., & Rieck, I. (2015). Prod. Eng. 9(1), 99–107. doi: 10.1007/s11740-014-0580-9
  • „Gallium gradients in Cu(In,Ga)Se2 thin-film solar cells“ Witte, W., Abou-Ras, D., Albe, K., Bauer, G. H., Bertram, F., Boit, C., Brüggemann, R., Christen, J., Dietrich, J., Eicke, A., Hariskos, D., Maiberg, M., Mainz, R., Meessen, M., Müller, M., Neumann, O., … Powalla, M. (2015). Prog. Photovoltaics Res. Appl. 23(6), 717–733. doi: 10.1002/pip.2485
  • “Side chain engineering of poly-thiophene and its impact on crystalline silicon based hybrid solar cells” Zellmeier, M., Rappich, J., Klaus, M., Genzel, C., Janietz, S., Frisch, J., Koch, N., & Nickel, N. H. (2015). Appl. Phys. Lett. 107(20). doi: 10.1063/1.4935751

2014

  •  “Rietveld-based energy-dispersive residual stress evaluation: Analysis of complex stress fields σij(z)” Apel, D., Klaus, M., Genzel, M., & Genzel, C. (2014). J. Appl. Crystallogr. 47(2), 511–526. doi: 10.1107/S1600576713034158
  • “Combustion Foaming of Al-Ti Intermetallics Studied In situ by Fast X-ray Radioscopy” Arakawa, Y., Jiménez, C., García-Moreno, F., Banhart, J., Rack, A., Kobashi, M., & Kanetake, N. (2014). Procedia Mater. Sci. 4, 281–285. doi: 10.1016/j.mspro.2014.07.558
  • “New insights on the formation of supersaturated solid solutions in the Cu-Cr system deformed by high-pressure torsion” Bachmaier, A., Rathmayr, G. B., Bartosik, M., Apel, D., Zhang, Z., & Pippan, R. (2014). Acta Mater. 69, 301–313. doi: 10.1016/j.actamat.2014.02.003
  • “Thermal stability of retained austenite in low alloyed TRIP-steel determined by high energy synchrotron radiation” Brauser, S., Kromm, A., Dabah, E., Kannengiesser, T., & Rethmeier, M. (2014). Mater. Sci. Forum 772, 129–133. doi: 10.4028/www.scientific.net/MSF.772.129
  • “Analysis of texture depth distribution by energy-dispersive diffraction” Coelho, R. S., Klaus, M., & Genzel, C. (2014). Mater. Sci. Forum Vol. 768–769, pp. 36–43. doi: 10.4028/www.scientific.net/MSF.768-769.36
  • “Numerical Studies of Shot Peening of High Strength Steels and the related Experimental Investigations by means of Hole Drilling, X-ray and Synchrotron Diffraction Analysis” Farajian, M., Hardenacke, V., Klaus, M., Schweizer, F., Pfeiffer, W., & Siegele, D. (2014). 12th International Conference on Shot Peening, 317–323. Germany: Goslar.
  • “Description of the Surface and Subsurface Material Conditions after Applying High Frequency Mechanical Impact (HFMI) Treatment, Shot Peening and Deep Rolling: A Step Towards Surface Engineering in Fatigue Resistant Welds” Farajian, M., Hardenacke, V., Preussner, J., Pfeiffer, W., & Siegele, D. (2014). In I.I.W. (Ed.), International Institute of Welding -IIW-; Korean Welding and Joining Society -KWJS-: 67th IIW Annual Assembly & International Conference 2014 : Advanced Technology in Welding and Joining for Heavy, Automotive and Electronics Industries, 13th - 18th July 2 (pp. 2532–14). Roissy Ch. De Gaulle Cedex.
  • “Residual stress analysis by energy-dispersive synchrotron diffraction: Concepts for high resolution depth profiling in real space” Fuß, T., Meixner, M., Klaus, M., & Genzel, C. (2014). Mater. Sci. Forum 768769, 44–51. doi: 10.4028/www.scientific.net/MSF.768-769.44
  • “Residual stress gradient analysis by multiple diffraction line methods” Genzel, C., Apel, D., Klaus, M., Genzel, M., & Balzar, D. (2014). Mater. Sci. Forum 768769, 3–18. doi: 10.4028/www.scientific.net/MSF.768-769.3
  • “Evolution of residual micro phase and orientation dependent stresses during cold wire drawing” Kriška, M., Tacq, J., Van Acker, K., & Seefeldt, M. (2014). In S. J. B. Kurz (Ed.), Materials Science Forum (Vol. 768–769, pp. 327–334). doi: 10.4028/www.scientific.net/MSF.768-769.327
  • “High-Energy Synchrotron Study of the Stress–Strain Behavior of Hydrogen-Charged High Strength Structural Steel” Kromm, A., Steppan, E., & Kannengiesser, T. (2014). In T. Kannengiesser (Ed.), In-situ Studies with Photons, Neutrons and Electrons Scattering II (pp. 165–176). doi: 10.1007/978-3-319-06145-0_10
  • “Analysis of the Deformation Behavior of Magnesium-Rare Earth Alloys Mg-2 pct Mn-1 pct Rare Earth and Mg-5 pct Y-4 pct Rare Earth by In Situ Energy-Dispersive X-ray Synchrotron Diffraction and Elasto-Plastic Self-Consistent Modeling” Lentz, M., Klaus, M., Coelho, R. S., Schaefer, N., Schmack, F., Reimers, W., & Clausen, B. (2014). Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 45(12), 5721–5735. doi: 10.1007/s11661-014-2533-5
  • “Non-destructive residual stress evaluation in mechanically surface treated Ti-2.5Cu by diffraction techniques” Maawad, E., Brokmeier, H. G., Wagner, L., Hofmann, M., Gan, W. M., Genzel, C., & Klaus, M. (2014). NDT E Int. 61, 67–70. doi: 10.1016/j.ndteint.2013.10.002
  • “Phase-transition-driven growth of compound semiconductor crystals from ordered metastable nanorods” Mainz, R., Singh, A., Levcenko, S., Klaus, M., Genzel, C., Ryan, K. M., & Unold, T. (2014). Nat. Commun. 5, 3133. doi: 10.1038/ncomms4133
  • “Investigations on thermal stresses of a graded Ti(C,N) coating deposited on WC-Co hardmetal” Ramos-Moore, E., Espinoza, C., Coelho, R. S., Pinto, H., Brito, P., Soldera, F., Mücklich, F., & Garcia, J. (2014). Adv. Mater. Res. 996, 848–854. doi: 10.4028/www.scientific.net/AMR.996.848
  • “Real-time observation of the phase transformations and microstructural changes during the incorporation of in into a thin Cu film at 770 K” Rodriguez-Alvarez, H., Weber, A., Mainz, R., Klaus, M., Kaufmann, C. A., Rissom, T., Genzel, C., & Schock, H. W. (2014). J. Alloys Compd. 588, 644–647. doi: 10.1016/j.jallcom.2013.11.147
  • “Response of high resolution silicon photodetectors coupled to CsI ( Tl ) or LaBr 3 ( Ce )” Schlosser, D. M. (2014). Thesis, Universität Siegen; Vol. 3. https://dspace.ub.uni-siegen.de/handle/ubsi/828
  • “Microstructure and residual stress formation during friction-stir welding of semi-solid cast ZK60-RE magnesium alloy” Silva, E. P., Batista, L. F., Callegari, B., Ferrinho, V., Buzolin, R. H., Coelho, R. S., Warchomicka, F., Requena, G. C., Ramirez, A. J., & Pinto, H. (2014). Adv. Mater. Res. 922, 688–693. doi: 10.4028/www.scientific.net/AMR.922.688
  • “Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending” Stefenelli, M., Riedl, A., Todt, J., Bartosik, M., Daniel, R., Mitterer, C., & Keckes, J. (2014). In S. J. B. Kurz (Ed.), Materials Science Forum (Vol. 768–769, pp. 272–279). doi: 10.4028/www.scientific.net/MSF.768-769.272
  • “Synchrotron diffraction study of the cementite phase in cold drawn pearlitic steel wires” Tacq, J., Kriška, M., & Seefeldt, M. (2014). In S. J. B. Kurz (Ed.), Materials Science Forum (Vol. 768–769, pp. 380–387). doi: 10.4028/www.scientific.net/MSF.768-769.380
  • “Analysis of residual stresses and wear mechanism of HF-CVD diamond coated cemented carbide tools” Uhlmann, E., Sammler, F., Meixner, M., Heinrich, D., Gansert, F., Reimers, W., Berger, D., & Rieck, I. (2014). Prod. Eng. 9(1), 99–107. doi: 10.1007/s11740-014-0580-9
  • “Evolution of compressive strains in retained austenite during sub-zero Celsius martensite formation and tempering” Villa, M., Pantleon, K., & Somers, M. A. J. (2014). Acta Mater. 65, 383–392. doi: 10.1016/j.actamat.2013.11.007
  • “Identification of load induced inhomogeneous plastic deformations in aluminium welds by diffraction methods” Workowski, M., Nitschke-Pagel, T., & Dilger, K. (2014). In S. J. B. Kurz (Ed.), Materials Science Forum (Vol. 768–769, pp. 675–681). doi: 10.4028/www.scientific.net/MSF.768-769.675
  • “Stress measurement at loaded aluminium welds using diffraction methods” Workowski, M., Nitschke-Pagel, T., & Dilger, K. (2014). Advanced Materials Research, 996, 431–438. doi: 10.4028/www.scientific.net/AMR.996.431

2013

  •  “Sub-pixel resolution of a pnCCD for X-ray white beam applications” Abboud, A., Send, S., Pashniak, N., Leitenberger, W., Ihle, S., Huth, M., Hartmann, R., Strüder, L., & Pietsch, U. (2013). J. Instrum. 8(5), 05005 1–15 10 1088 1748–0221 8 05 05005. doi: 10.1088/1748-0221/8/05/P05005
  • “Welding residual stress behavior under mechanical loading: Henry Granjon prize competition 2012 winner category C: Design and structural integrity” Farajian, M. (2013). Weld. World Vol. 57, pp. 157–169. doi: 10.1007/s40194-013-0024-8
  • “White-beam X-ray radioscopy and tomography with simultaneous diffraction at the EDDI beamline” García-Moreno, F., Jiménez, C., Kamm, P. H., Klaus, M., Wagener, G., Banhart, J., & Genzel, C. (2013). J. Synchrotron Radiat. 20(5), 809–810. doi: 10.1107/S0909049513018670
  • “Residual Stress Analysis by X-Ray Diffraction Methods” Genzel, C., Denks, I. A., & Klaus, M. (2013). Mod. Diffr. Methods pp. 127–154. doi: 10.1002/9783527649884.ch5
  • “Determination of composition, residual stress and stacking fault depth profiles in expanded austenite with energy-dispersive diffraction” Jegou, S., Christiansen, T. L., Klaus, M., Genzel, C., & Somers, M. A. J. (2013). Thin Solid Films 530, 71–76. doi: 10.1016/j.tsf.2012.06.029
  • “Metal foaming studied in situ by energy dispersive x-ray diffraction of synchrotron radiation, x-ray radioscopy, and optical expandometry” Jiménez, C., Garcia-Moreno, F., Pfretzschner, B., Kamm, P. H., Neu, T. R., Klaus, M., Genzel, C., Hilger, A., Manke, I., & Banhart, J. (2013). Adv. Eng. Mater. 15(3), 141–148. doi: 10.1002/adem.201200183
  • “Co-evaporation of Cu(In, Ga)Se2 at low temperatures: An In-Situ x-ray growth analysis” Kaufmann, C. A., Greiner, D., Rodriguez-Alvarez, H., Weber, A., Heinemann, M. D., Lauche, J., Klaus, M., Genzel, C., Schock, H. W., & Mainz, R. (2013). Conf. Rec. IEEE Photovolt. Spec. Conf. pp. 3058–3061. doi: 10.1109/PVSC.2013.6745106
  • “Effect of high temperature heat treatments on the deformation behavior of Mg-2%Mn-0.7%Ce extrusions investigated by in-situ energy-dispersive synchrotron X-ray diffraction and elasto-plastic self-consistent modeling” Lentz, M., Klaus, M., Reimers, W., & Clausen, B. (2013). Mater. Sci. Eng. A 586, 178–189. doi: 10.1016/j.msea.2013.08.020
  • „HT-CIGS“ Mainz, R., Pistor, P., Schmidt, S., Klaer, J., & Klenk, R. S. (2013).
  • “Real-time observation of Cu2ZnSn(S,Se)4 solar cell absorber layer formation from nanoparticle precursors” Mainz, R., Walker, B. C., Schmidt, S. S., Zander, O., Weber, A., Rodriguez-Alvarez, H., Just, J., Klaus, M., Agrawal, R., & Unold, T. (2013). Phys. Chem. Chem. Phys. 15(41), 18281–18289. doi: 10.1039/c3cp53373e
  • “Sin2ψ-based residual stress gradient analysis by energy-dispersive synchrotron diffraction constrained by small gauge volumes. II. Experimental implementation“ Meixner, M., Klaus, M., & Genzel, C. (2013). J. Appl. Crystallogr. Vol. 46, pp. 619–627. doi: 10.1107/S0021889813008364
  • “Sin 2 ψ-based residual stress gradient analysis by energy-dispersive synchrotron diffraction constrained by small gauge volumes. I. Theoretical concept” Meixner, M., Klaus, M., & Genzel, C. (2013). J. Appl. Crystallogr. 46(3), 610–618. doi: 10.1107/S0021889813008340
  • “Oxygen order-disorder phase transition in layered GdBaCo2O 5+δ perovskite: Thermodynamic and transport properties” Mogni, L., Prado, F., Jiménez, C., & Caneiro, A. (2013). Solid State Ionics 240, 19–28. doi: 10.1016/j.ssi.2013.03.021
  • “Residual stresses and tetragonal phase fraction characterisation of corrosion tested Zircaloy-4 using energy dispersive synchrotron X-ray diffraction” Polatidis, E., Frankel, P., Wei, J., Klaus, M., Comstock, R. J., Ambard, A., Lyon, S., Cottis, R. A., & Preuss, M. (2013). J. Nucl. Mater. 432(1–3), 102–112. doi: 10.1016/j.jnucmat.2012.07.025
  • “Recrystallization of Cu(In,Ga)Se2 thin films studied by X-ray diffraction” Rodriguez-Alvarez, H., Barreau, N., Kaufmann, C. A., Weber, A., Klaus, M., Painchaud, T., Schock, H. W., & Mainz, R. (2013). Acta Mater. Vol. 61, pp. 4347–4353. doi: 10.1016/j.actamat.2013.04.006
  • “Real-time study of Ga diffusion processes during the formation of Cu(In,Ga)Se2: The role of Cu and Na content” Rodriguez-Alvarez, H., Mainz, R., Caballero, R., Abou-Ras, D., Klaus, M., Gledhill, S., Weber, A., Kaufmann, C. A., & Schock, H. W. (2013). Sol. Energy Mater. Sol. Cells Vol. 116, pp. 102–109. doi: 10.1016/j.solmat.2013.04.008
  • „Verbundprojekt GRACIS: Chemische Gradienten in Cu(In,Ga)(S,Se)2“ Rodriguez-Alvarez, H., Mainz, R., & Schlussbericht. (2013).
  • “Formation of CuInSe2 and CuGaSe2 thin-films deposited by three-stage thermal co-evaporation: A real-time X-ray diffraction and fluorescence study” Rodriguez-Alvarez, H., Weber, A., Lauche, J., Kaufmann, C. A., Rissom, T., Greiner, D., Klaus, M., Unold, T., Genzel, C., Schock, H. W., & Mainz, R. (2013). Adv. Energy Mater. 3(10), 1381–1387. doi: 10.1002/aenm.201300339
  • “Utilization of a frame store pnCCD for energy-dispersive Laue diffraction with white synchrotron radiation” Send, S. (2013). Thesis, Universität Siegen. https://dspace.ub.uni-siegen.de/handle/ubsi/755
  • “The effect of Sn on autoclave corrosion performance and corrosion mechanisms in Zr-Sn-Nb alloys” Wei, J., Frankel, P., Polatidis, E., Blat, M., Ambard, A., Comstock, R. J., Hallstadius, L., Hudson, D., Smith, G. D. W., Grovenor, C. R. M., Klaus, M., Cottis, R. A., Lyon, S., & Preuss, M. (2013). Acta Mater. 61(11), 4200–4214. doi: 10.1016/j.actamat.2013.03.046

2012

  •  “Lateral gradients of phases, residual stress and hardness in a laser heated Ti 0.52Al 0.48N coating on hard metal” Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Stefenelli, M., Klaus, M., Genzel, C., Mitterer, C., & Keckes, J. (2012). Surf. Coatings Technol. 206(22), 4502–4510. doi: 10.1016/j.surfcoat.2012.02.035
  • “Epitaxial stress and texture in thin oxide layers grown on Fe-Al alloys” Brito, P., Pinto, H., Genzel, C., Klaus, M., & Kaysser-Pyzalla, A. (2012). Acta Mater. 60(3), 1230–1237. doi: 10.1016/j.actamat.2011.11.033
  • “In situ synchrotron X-ray radiation analysis of hydrogen behavior in stainless steel subjected to continuous heating” Dabah, E., Kannengiesser, T., Eliezer, D., & Boellinghaus, T. (2012). J. Mater. Sci. 47(15), 5879–5885. doi: 10.1007/s10853-012-6489-9
  • “Kinetics of tri-axial and spatial residual stress relaxation: Study by synchrotron radiation diffraction in a 2014Al alloy” Ferreira-Barragáns, S., Fernández, R., Fernández-Castrillo, P., & González-Doncel, G. (2012). J. Alloys Compd. 523, 94–101. doi: 10.1016/j.jallcom.2012.01.081
  • “Influence of SiC particles on compressive deformation of magnesium matrix composites” Garcés, G., Oñorbe, E., Pérez, P., Klaus, M., Genzel, C., & Adeva, P. (2012). Mater. Sci. Eng. A 533, 119–123. doi: 10.1016/j.msea.2011.10.103
  • “Residual Stress Analysis by X-Ray Diffraction Methods” Genzel, C., Denks, I. A., & Klaus, M. (2012). Mod. Diffr. Methods pp. 127–154. doi: 10.1002/9783527649884.ch5
  • “Partial decomposition of TiH 2 studied in situ by energy-dispersive diffraction and ex situ by diffraction microtomography of hard X-ray synchrotron radiation” Jiménez, C., Garcia-Moreno, F., Rack, A., Tucoulou, R., Klaus, M., Pfretzschner, B., Rack, T., Cloetens, P., & Banhart, J. (2012). Scr. Mater. 66(10), 757–760. doi: 10.1016/j.scriptamat.2012.01.057
  • “Metal Foaming Studied In-situ by Energy Dispersive XRD of Synchrotron Radiation , X-ray Radioscopy , and Optical Imaging” Jiménez, C., Pfretzschner, B., Kamm, P., Neu, T., & Klaus, M. (2012). 7th International Conference on Porous Metals and Metallic Foams, 13–19.
  • “Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys” Maawad, E., Sano, Y., Wagner, L., Brokmeier, H. G., & Genzel, C. (2012). Mater. Sci. Eng. A 536, 82–91. doi: 10.1016/j.msea.2011.12.072
  • “Internal load transfer and damage evolution in a 3D interpenetrating metal/ceramic composite” Roy, S., Gibmeier, J., Kostov, V., Weidenmann, K. A., Nagel, A., & Wanner, A. (2012). Mater. Sci. Eng. A 551, 272–279. doi: 10.1016/j.msea.2012.05.016
  • “The complex material properties of chalcopyrite and kesterite thin-film solar cell absorbers tackled by synchrotron-based analytics” Schorr, S., Mainz, R., Mönig, H., Lauermann, I., & Bär, M. (2012). Prog. Photovoltaics Res. Appl. 20(5), 557–567. doi: 10.1002/pip.1256
  • “Martensitic transformation and stress partitioning in a high-carbon steel” Villa, M., Grumsen, F. B., Pantleon, K., & Somers, M. A. J. (2012). Scr. Mater. 67(6), 621–624. doi: 10.1016/j.scriptamat.2012.06.027

2011

  •  “Rietveld refinement of energy-dispersive synchrotron measurements” Apel, D., Klaus, M., Genzel, C., & Balzar, D. (2011). D Apel, M. Klaus, & D. B. Z. K. Ch. Genzel, Eds. Zeitschrift Fur Krist. Vol. 226, pp. 934–943. doi: 10.1524/zkri.2011.1436
  • “The influence of hydrogen on thermal desorption processes in structural materials” Bar, R., Dabah, E., Eliezer, D., Kannengiesser, T., & Boellinghaus, T. (2011). Procedia Eng. 10, 3668–3676. doi: 10.1016/j.proeng.2011.04.604
  • “Impact of transition oxides on growth stresses and texture of alumina scales formed during oxidation of iron aluminides” Brito, P., Pinto, H., Genzel, C., Klaus, M., & Kaysser-Pyzalla, A. (2011). Scr. Mater. 65(4), 312–315. doi: 10.1016/j.scriptamat.2011.04.039
  • “In situ analysis of hydrogen behaviour in stainless steels by high energy synchrotron radiation” Dabah, E., Kannengiesser, T., Eliezer, D., & Boellinghaus, T. (2011). Mater. Sci. Eng. A 528(3), 1608–1614. doi: 10.1016/j.msea.2010.10.090
  • “Residual stress field determination in welds by means of X-ray, synchrotron and neutron diffraction” Farajian, M., Nitschke-Pagel, T., Wimpory, R. C., Hofmann, M., & Klaus, M. (2011). Materwiss. Werksttech. 42(11), 996–1001. doi: 10.1002/mawe.201100782
  • “Bridging gaps in surface zone residual stress analysis using complementary probes for strain depth profiling” Fuß, T., Wimpory, R. C., Klaus, M., & Genzel, C. (2011). Mater. Sci. Forum 681, 411–416. doi: 10.4028/www.scientific.net/MSF.681.411
  • “Exploiting the features of energy-dispersive synchrotron diffraction for advanced residual stress and texture analysis” Genzel, C., Denks, I. A., Coelho, R., Thomas, D., Mainz, R., Apel, D., & Klaus, M. (2011). J. Strain Anal. Eng. Des. 46(7), 615–625. doi: 10.1177/0309324711403824
  • “Energy-dispersive diffraction stress analysis under laboratory and synchrotron conditions: A comparative study” Genzel, C., Krahmer, S., Klaus, M., & Denks, I. A. (2011). J. Appl. Crystallogr. 44(1), 1–12. doi: 10.1107/S0021889810047898
  • “Decomposition of TiH2 studied in situ by synchrotron X-ray and neutron diffraction” Jiménez, C., Garcia-Moreno, F., Pfretzschner, B., Klaus, M., Wollgarten, M., Zizak, I., Schumacher, G., Tovar, M., & Banhart, J. (2011). Acta Mater. 59(16), 6318–6330. doi: 10.1016/j.actamat.2011.06.042
  • “Multilayer systems for cutting tools: On the relationship between coating design, surface processing, and residual stress” Klaus, M. & Genzel, C. (2011). Adv. Eng. Mater. 13(8), 845–850. doi: 10.1002/adem.201000306
  • “High-energy synchrotron diffraction study of a transformation induced plasticity steel during tensile deformation” Kromm, A., Brauser, S., Kannengiesser, T., & Rethmeier, M. (2011). J. Strain Anal. Eng. Des. 46(7), 581–591. doi: 10.1177/0309324711403969
  • “Residual stresses in multilayer welds with different martensitic transformation temperatures analyzed by high-energy synchrotron diffraction” Kromm, A., Kannengiesser, T., Altenkirch, J., & Gibmeier, J. (2011). Mater. Sci. Forum 681, 37–42. doi: 10.4028/www.scientific.net/MSF.681.37
  • “Residual Stress Distribution in Alpha and Beta Phases of Mechanically Surface Treated TIMETAL LCB Determined by Energy-Dispersive X-Ray Diffraction” Maawad, E., Brokmeier, H., Wagner, L., Genzel, C., & Klaus, M. (2011). In E. Maawad, H.-G. Brokmeier, L. Wagner, & M. K. Ch. Genzel (Eds.), Proceedings of the 11th Int. Conf. on Shot Peening (pp. 2–7).
  • “Investigation of energy-relevant materials with synchrotron X-rays and neutrons” Manke, I., Markötter, H., Tötzke, C., Kardjilov, N., Grothausmann, R., Dawson, M., Hartnig, C., Haas, S., Thomas, D., Hoell, A., Genzel, C., & Banhart, J. (2011). Adv. Eng. Mater. 13(8), 712–729. doi: 10.1002/adem.201000284
  • “Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis” Meixner, M., Fitzpatrick, M. E., & Reimers, W. (2011). Compos. Sci. Technol. 71(2), 167–176. doi: 10.1016/j.compscitech.2010.11.003
  • “Influence of precursor stacking on the absorber growth in Cu(In,Ga)S 2 based solar cells prepared by a rapid thermal process” Merdes, S., Mainz, R., Rodriguez-Alvarez, H., Klaer, J., Klenk, R., Meeder, A., Schock, H. W., & Lux-Steiner, M. C. (2011). Thin Solid Films 519(21), 7189–7192. doi: 10.1016/j.tsf.2011.01.397
  • “The evolution of internal strain in Mg-Y-Zn alloys with a long period stacking ordered structure” Oñorbe, E., Garcés, G., Pérez, P., Cabezas, S., Klaus, M., Genzel, C., Frutos, E., & Adeva, P. (2011). Scr. Mater. 65(8), 719–722. doi: 10.1016/j.scriptamat.2011.07.017
  • “Examination of growth kinetics of copper rich Cu(In,Ga)Se2-films using synchrotron energy dispersive X-ray diffractometry” Rissom, T., Mainz, R., Kaufmann, C. A., Caballero, R., Efimova, V., Hoffmann, V., & Schock, H. W. (2011). Sol. Energy Mater. Sol. Cells 95(1), 250–253. doi: 10.1016/j.solmat.2010.05.007
  • “Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure” Roy, S., Gibmeier, J., Kostov, V., Weidenmann, K. A., Nagel, A., & Wanner, A. (2011). Acta Mater. 59(4), 1424–1435. doi: 10.1016/j.actamat.2010.11.004
  • “Neutrons and photons in materials research for thin film solar cells” Schorr, S., Stephan, C., Mainz, R., Rodriguez-Alvarez, H., & Tovar, M. (2011). Adv. Eng. Mater. 13(8), 737–741. doi: 10.1002/adem.201000290
  • “Inelastic behavior of the single domain of metal-ceramic composites with lamellar microstructure” Sinchuk, Y., Piat, R., Roy, S., Gibmeier, J., & Wanner, A. (2011). PAMM 11(1), 285–286. doi: 10.1002/pamm.201110134
  • “In-situ studies of the recrystallization process of CuInS2 thin films by energy dispersive X-ray diffraction” Thomas, D., Mainz, R., Rodriguez-Alvarez, H., Marsen, B., Abou-Ras, D., Klaus, M., Genzel, C., & Schock, H. W. (2011). Thin Solid Films 519(21), 7193–7196. doi: 10.1016/j.tsf.2010.12.229
  • “Sub-zero austenite to martensite transformation in a Fe-Ni-0.6wt.%C alloy” Villa, M., Pantleon, K., & Somers, M. A. J. (2011). In M Villa, K. Pantleon, & M. A. J. Somers (Eds.), Proceedings of the 19th Congress of the International Federation for Heat Treatment and Surface Engineering (pp. 147 – 152). http://orbit.dtu.dk/en/publications/subzero-austenite-to-martensite-transformation-in-a-feni06wtc-alloy(a1732b22-6128-4e43-8f0a-35f65fb7414a).html
  • “Influence of Ti/TiAlN-multilayer designs on their residual stresses and mechanical properties” Vogli, E., Tillmann, W., Selvadurai-Lassl, U., Fischer, G., & Herper, J. (2011). Appl. Surf. Sci. 257(20), 8550–8557. doi: 10.1016/j.apsusc.2011.05.013
  • “Fast Cu(In, Ga)Se 2 formation by processing Cu-In-Ga precursors in selenium atmosphere” Weber, A., Rodriguez, H., Mainz, R., Klaer, J., Pistor, P., Klenk, R., Klaus, M., Meeder, A., Neisser, A., & Schock, H. W. (2011). Conference Record of the IEEE Photovoltaic Specialists Conference, 003315–003320. doi: 10.1109/PVSC.2011.6186649
  • “Influence of mechanical surface treatments on the high cycle fatigue performance of TIMETAL 54M” Zay, K., Maawad, E., Brokmeier, H. G., Wagner, L., & Genzel, C. (2011). Mater. Sci. Eng. A 528(6), 2554–2558. doi: 10.1016/j.msea.2010.12.064
  • “Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions” Zhilyaev, A. P., Sabirov, I., González-Doncel, G., Molina-Aldareguía, J., Srinivasarao, B., & Pérez-Prado, M. T. (2011). Mater. Sci. Eng. A 528(9), 3496–3505. doi: 10.1016/j.msea.2011.01.062
  • “In-situ synchrotron study of a high alloyed cold work tool steel during heat treatment under nitrogen atmosphere” Zumsande, K., Krasokha, N., Huth, S., Weber, S., & Theisen, W. (2011). Proc. Euro Int. Powder Metall. Congr. Exhib. Euro PM 2011 3, 187 – 192.

2010

  •  “X-ray and neutron imaging – Complementary techniques for materials science and engineering” Banhart, J., Borbély, A., Dzieciol, K., Garcia-Moreno, F., Manke, I., Kardjilov, N., Kaysser-Pyzalla, A. R., Strobl, M., & Treimer, W. (2010). Int. J. Mater. Res. 101(9), 1069–1079. doi: 10.3139/146.110382
  • “In-situ synchrotron diffraction and digital image correlation technique for characterizations of retained austenite stability in low-alloyed transformation induced plasticity steel” Brauser, S., Kromm, A., Kannengiesser, T., & Rethmeier, M. (2010). Scr. Mater. 63(12), 1149–1152. doi: 10.1016/j.scriptamat.2010.08.007
  • “Internal Stresses and Texture of Nano-Structured Alumina Scales Growing on Fe3Al Polycrystals” Brito, P., Pinto, H., Klaus, M., Genzel, C., & Pyzalla, A. (2010). Advances in X-Ray Analysis 53, 81–88.
  • “Internal stresses and textures of nanostructured alumina scales growing on polycrystalline Fe 3 Al alloy” Brito, P., Pinto, H., Klaus, M., Genzel, C., & Kaysser-Pyzalla, A. (2010). Powder Diffr. 25(2), 114–118. doi: 10.1154/1.3402764
  • “Through-thickness texture profiling by energy dispersive synchrotron diffraction” Coelho, R. S., Klaus, M., & Genzel, C. (2010). J. Appl. Crystallogr. 43(6), 1322–1328. doi: 10.1107/S0021889810037210
  • “Development of twin fractions and microstresses of the hot extruded magnesium alloy AZ31 under cyclic loading conditions” Huppmann, M. & Reimers, W. (2010). Mater. Sci. Forum Vol. 638–642, pp. 2411–2416. doi: 10.4028/www.scientific.net/MSF.638-642.2411
  • “Microstructural development of the hot extruded magnesium alloy AZ31 under cyclic testing conditions” Huppmann, M., Stark, S., & Reimers, W. (2010). Int. J. Mater. Res. Vol. 101, pp. 1441–1449. doi: 10.3139/146.110378
  • “Evolution of microstructure and internal stresses in multi-phase oxide scales grown on (110) surfaces of iron single crystals at 650 °c” Juricic, C., Pinto, H., Cardinali, D., Klaus, M., Genzel, C., & Pyzalla, A. R. (2010). Oxid. Met. 73(1–2), 115–138. doi: 10.1007/s11085-009-9166-x
  • “Effect of substrate grain size on the growth, texture and internal stresses of iron oxide scales forming at 450 °c” Juricic, C., Pinto, H., Cardinali, D., Klaus, M., Genzel, C., & Pyzalla, A. R. (2010). Oxid. Met. Vol. 73, pp. 15–41. doi: 10.1007/s11085-009-9162-1
  • „In-situ-Analyse der Phasenumwandlungskinetik während des Schweißens“ Kannengießer, T., Kromm, A., Gibmeier, J., & Rethmeier, M. (2010). Mater. Test. 52(4), 204–210. doi: 10.3139/120.110122
  • “Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction” Kirchlechner, C., Martinschitz, K. J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C., & Keckes, J. (2010). Thin Solid Films Vol. 518, pp. 2090–2096. doi: 10.1016/j.tsf.2009.08.011
  • “X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel” Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C., & Keckes, J. (2010). Scr. Mater. 62(10), 774–777. doi: 10.1016/j.scriptamat.2010.02.006
  • “In-situ observation of phase transformations during welding of low transformation temperature filler material” Kromm, A., Kannengiesser, T., & Gibmeier, J. (2010). Mater. Sci. Forum Vol. 638–642, pp. 3769–3774. doi: 10.4028/www.scientific.net/MSF.638-642.3769
  • “Stress distribution in mechanically surface treated Ti-2.5Cu determined by combining energy-dispersive synchrotron and neutron diffraction” Maawad, E., Brokmeier, H.-G., Hofmann, M., Genzel, C., & Wagner, L. (2010). Mater. Sci. Eng. A 527(21–22), 5745–5749. doi: 10.1016/j.msea.2010.05.044
  • “Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties” Multigner, M., Ferreira-Barragáns, S., Frutos, E., Jaafar, M., Ibáñez, J., Marín, P., Pérez-Prado, M. T., González-Doncel, G., Asenjo, A., & González-Carrasco, J. L. (2010). Surf. Coatings Technol. 205(7), 1830–1837. doi: 10.1016/j.surfcoat.2010.07.126
  • “Phase Development, Texture and Internal Stress Evolution during the Oxidation of Iron Aluminides” Paiva Brito, P. (2010). Thesis. Universität Bochum.
  • “Copper sulfide assisted recrystallization of cu-poor CuInS2 observed In-Situ by polychromatic x-ray diffraction” Rodriguez-Alvarez, H., Mainz, R., Marsen, B., Weber, A., & Schock, H. W. (2010). Mater. Res. Soc. Symp. Proc. Vol. 1165, pp. 53–59.
  • “Recrystallization of Cu-poor CuInS2 assisted by metallic Cu or Ag” Rodriguez-Alvarez, H., Mainz, R., Marsen, B., & Schock, H. W. (2010). J. Solid State Chem. Vol. 183, pp. 803–806. doi: 10.1016/j.jssc.2010.01.023
  • “Recrystallization of Cu-In-S thin films studied in situ by energy-dispersive X-ray diffraction” Rodriguez-Alvarez, H., Mainz, R., Marsen, B., Abou-Ras, D., & Schock, H. W. (2010). J. Appl. Crystallogr. Vol. 43, pp. 1053–1061. doi: 10.1107/S0021889810025860

2009

  •  “Formation of welding residual stresses in low transformation temperature (LTT) materials” Kannengiesser, T. & Kromm, A. (2009). Soldag. Inspeção 14(1), 74–81. doi: 10.1590/S0104-92242009000100009
  • “Application of energy-dispersive diffraction to the analysis of highly inhomogeneous residual stress fields in thin film structures” Klaus, M., Reimers, W., & Genzel, C. (2009). Powder Diffr. Vol. 24, pp. S82–S86. doi: 10.1154/1.3134362
  • “Determination of Residual Stresses in Low Transformation Temperature (LTT -) Weld Metals using X-ray and High Energy Synchrotron Radiation” Kromm, A., Kannengiesser, T., Gibmeier, J., Genzel, C., & van der Mee, V. (2009). Weld. World 53(1–2), 3–16. doi: 10.1007/BF03266687
  • “In-situ-phase analysis using synchrotron radiation of low transformation temperature (LTT) welding material” Kromm, A. & Kannengiesser, T. (2009). Soldag. Inspeção 14(1), 82–88. doi: 10.1590/S0104-92242009000100010
  • “Investigation of Near-Surface Stress Gradients in Shot Peened Ti-2.5Cu Measured by Mechanical and Diffraction Methods” Maawad, E., Brokmeier, H.-G., Wagner, L., & Genzel, C. (2009). Proceedings of the 9th International Conference on Production Engineering, Design and Control: Alexandria, Egypt, 1–9.
  • “Influencia del arenado de la aleación Ti6Al4V en la dureza subsuperficial y estado de tensiones residuales” Multigner, M., Fernández-Castrillo, P., Ferreira-Barragans, S., González-Doncel, G., & González-Carrasco, J. L. (2009). Rev. Metal. 45(1), 52–57. doi: 10.3989/revmetalm.0803
  • “Growth paths for the sulfurization of Cu-rich Cu/In thin films” Rodriguez-Alvarez, H., Koetschau, I. M., Genzel, C., & Schock, H. W. (2009). Thin Solid Films 517(7), 2140–2144. doi: 10.1016/j.tsf.2008.10.091
  • „Drehen von AlSi-Legierungen mit CVD-diamantbeschichteten Werkzeugen“ Uhlmann, E., Byrne, F., Reimers, W., & Klaus, M. (2009). Forschung in Bewegung, Magdeburger Maschinenbau-Tage, 9, 506–518. Univ. Magdeburg.