Publikationen 2011


Abou-Ras, D.; Caballero, R.; Fischer, C.-H.; Kaufmann, C.A.; Lauermann, I.; Mainz, R.; Mönig, H.; Schöpke, A.; Stephan, C.; Streeck, C.; Schorr, S.; Eicke, A.; Döbeli, M.; Gade, B.; Hinrichs, J.; Nunney, T.; Dijkstra, H.; Hoffmann, V.; Klemm, D.; Efimova, V.; Bergmaier, A.; Dollinger, G.; Wirth, T.; Unger, W.; Rockett, A.A.; Perez-Rodriguez, A.; Alvarez-Garcia, J.; Izquierdo-Roca, V.; Schmid, T.; Choi, P.-P.; Müller, M.; Bertram, F.; Christen, J.; Khatri, H.; Collins, R. W.; Marsillac, S.; Kötschau, I.: Comprehensive Comparison of Various Techniques for the Analysis of Elemental Distributions in Thin Films. Microscopy and Microanalysis 17 (2011), p. 728-751
doi:10.1017/S1431927611000523


Apel, D.; Klaus, M.; Genzel, Ch.; Balzar, D.: Rietveld refinement of energy-dispersive synchrotron measurements. Zeitschrift für Kristallographie 226 (2011), p. 934 - 943
doi:10.1524/zkri.2011.1436


Brito, P.; Pinto, H.; Genzel, C.; Klaus, M.; Kaysser-Pyzalla, A.: Impact of transition oxides on growth stresses and texture of alumina scales formed during oxidation of iron aluminides. Scripta Materialia 65 (2011), p. 312-315
doi:10.1016/j.scriptamat.2011.04.039


Farajian, M.; Nitschke-Pagel, T.; Wimpory, R.C.; Hofmann, M.; Klaus, M.: Residual Stress Field Measurements in Welds by Means of X-ray, Synchrotron and Neutron Diffraction. Materialwissenschaft und Werkstofftechnik 42 (2011), p. 996-1001
doi:10.1002/mawe.201100782


Fuß, T.; Wimpory, R.C.; Klaus, M.; Genzel, Ch.: Bridging gaps in surface zone residual stress analysis using complementary probes for strain depth profiling. Materials Science Forum 681 (2011), p. 411 - 416
doi:10.4028/www.scientific.net/MSF.681.411


Genzel, C.; Denks, I.A.; Coelho, R.; Thomas, D.; Mainz, R.; Apel, D.; Klaus, M.: Exploiting the features of energy-dispersive synchrotron diffraction for advanced residual stress and texture analysis. Journal of Strain Analysis for Engineering Design 46 (2011), p. 615-625
doi:10.1177/0309324711403824


Grothausmann, R.; Zehl, G.; Manke, I.; Fiechter, S.; Bogdanoff, P.; Dorbandt, I.; Kupsch, A.; Lange, A.; Hentschel, M.P.; Schumacher, G.; Banhart, J.: Quantitative Structural Assessment of Heterogeneous Catalysts by Electron Tomography. Journal of the American Chemical Society 133 (2011), p. 18161-18171
doi:10.1021/ja2032508


Harizanova, R.; Gugov, I.; Ruessel, C.; Tatchev, D.; Raghuwanshi, V.S.; Hoell, A.: Crystallization of (Fe, Mn)-based nanoparticles in sodium-silicate glasses. Journal of Materials Science 46 (2011), p. 7169-7176
doi:10.1007/s10853-011-5840-x


Harizanova, Ruzha; Raghuwanshi, Vikram S.; Tatchev, Dragomir; Gugov, Ivailo; Hoell, Armin; Ruessel, Christian: Synthesis and Phase Composition of Fe/Mn Containing Nanocrystals in Glasses from the System Na2O/MnO/SiO2/Fe2O3. In: Reithmaier [Ed.] : Nanotechnological basis for advanced sensors. Dodrecht [u.a.] : Springer, 2011. - ISBN 978-94-007-0905-8 , p. 249-254
doi:10.1007/978-94-007-0903-4_28


Javid, N.; Vogtt, K.; Roy, S.; Hirst, A.R.; Hoell, A.; Hamley, I.W.; Ulijn, A.V.; Sefcik, J.: Supramolecular Structures of Enzyme Clusters. Journal of Physical Chemistry Letters 2 (2011), p. 1395-1399
doi:10.1021/jz200446j


Jimenez, C.; Garcia-Moreno, F.; Pfretzschner, B.; Klaus, M.; Wollgarten, M.; Zizak, I.; Schumacher, G.; Tovar, M.; Banhart, J.: Decomposition of TiH2 studied in situ by synchrotron X-ray and neutron diffraction. Acta Materialia 59 (2011), p. 6318-6330
doi:10.1016/j.actamat.2011.06.042


Klaus, M.; Genzel, Ch.: Multilayer systems for cutting tools: On the relationship between coating design, surface processing, and residual stress. Advanced Engineering Materials 13 (2011), p. 845 - 850
doi:10.1002/adem.201000306


Maawad, E.; Brockmeier, H.G.; Wagner, L.; Sano, Y.; Genzel, Ch.: Investigation on the surface and near-surface characteristics of Ti-2.5Cu after various mechanical surface treatments. Surface & Coatings Technology 205 (2011), p. 3644 - 3650
doi:10.1016/j.surfcoat.2011.01.001


Maawad, E.; Brokmeier, H.-G.; Wagner, L.; Genzel, Ch.; Klaus, M.: Residual Stress Distribution in Alpha and Beta Phases of Mechanically Surface Treated TIMETAL LCB Determined by Energy-Dispersive X-Ray Diffraction. In: Proceedings of the 11th Int. Conf. on Shot Peening (2011). , 2011, p. 1-6


Merdes, S.; Mainz, R.; Rodriguez-Alvarez, H.; Klaer, J.; Klenk, R.; Meeder, A.; Schock, H.-W.; Lux-Steiner, M.-C.: Influence of precursor stacking on the absorber growth in Cu(In,Ga)S2 based solar cells prepared by a rapid thermal process. Thin Solid Films 519 (2011), p. 7189-7192
doi:10.1016/j.tsf.2011.01.397


Mukherji, D.; Rösler, J.; Strunz, P.; Gilles, R.; Schumacher, G.; Piegert, S.: Beyond Ni-based superalloys: Development of CoRe-based alloys for gas turbine applications at very high temperatures. International Journal of Materials Research 102 (2011), p. 1125-1132
doi:10.3139/146.110563


Onorbe, E.; Garcés, G.; Pérz, P.; Cabezas, S.; Klaus, M.; Genzel, C.; Frutos, E.; Adeva, P.: The evolution of internal strain in Mg-Y-Zn alloys with a long period stacking ordered structure. Scripta Materialia 65 (2011), p. 719 - 722
doi:10.1016/j.scriptamat.2011.07.017


Rissom, T.; Mainz, R.; Kaufmann, C.A.; Caballero, R.; Efimova, V.; Hoffmann, V.; Schock, H.-W.: Examination of growth kinetics of copper rich Cu(In,Ga)Se-2-films using synchrotron energy dispersive X-ray diffractometry. Solar Energy Materials and Solar Cells 95 (2011), p. 250-253
doi:10.1016/j.solmat.2010.05.007


Robinson, J.S.; Tanner, D.A.; Truman, C.E.; Wimpory, R.C.: Measurement and prediction of machining induced redistribution of residual stress in the aluminium alloy 7449. Experimental Mechanics 51 (2011), p. 981-993
doi:10.1007/s11340-010-9389-4


Schorr, S.; Stephan, C.; Mainz, R.; Rodriguez-Alvarez, H.; Tovar, M.: Neutrons and Photons in Materials Research for Thin Film Solar Cells. Advanced Engineering Materials 13 (2011), p. 737-741
doi:10.1002/adem.201000290


Schöbel, M.; Jonke, J.; Degischer, H.P.; Hermann, A.; Brendel, A.; Wimpory, R.; Buslaps, T.: Thermal Cycling Stresses in W-Monofilament Reinforced Copper. Advanced Engineering Materials 13 (2011), p. 742 - 746
doi:10.1002/adem.201000309


Schöbel, M.; Jonke, J.; Degischer, H.P.; Paffenholz, V.; Brendel, A.; Wimpory, R.C.; Di Michiel, M.: Thermal fatigue damage in monofilament reinforced copper for heat sink applications in divertor elements. Journal of Nuclear Materials 409 (2011), p. 225 - 234
doi:10.1016/j.jnucmat.2010.12.242


Strobl, M.; Hilger, A.; Boin, M.; Kardjilov, N.; Wimpory, R.; Clemens, D.; Mühlbauer, M.; Schillinger, B.; Wilpert, T.; Schulz, C.; Rolfs, K.; Davies, C. M.; O'Dowd, N.; Tiernan, P.; Manke, I.: Time-of-flight neutron imaging at a continuous source: Proof of principle using a scintillator CCD imaging detector. Nuclear Instruments & Methods in Physics Research A 651 (2011), p. 149-155
doi:10.1016/j.nima.2010.12.121


Strunz, P.; Schumacher, G.; Klingelhöffer, H.; Wiedenmann, A.; Saroun, J.; Keiderling, U.: In situ observation of morphological changes of γ' precipitates in a pre-deformed single-crystal Ni-base superalloy. Journal of Applied Crystallography 44 (2011), p. 935-944
doi:10.1107/S0021889811028147


Tatchev, D.; Hoell, A.; Eichelbaum, M.; Rademann, K.: X-Ray-Assisted Formation of Gold Nanoparticles in Soda Lime Silicate Glass: Suppressed Ostwald Ripening. Physical Review Letters 106 (2011), p. 085702/1-4
doi:10.1103/PhysRevLett.106.085702


Thomas, D.; Mainz, R.; Rodriguez-Alvarez, H.; Marsen, B.; Abou-Ras, D.; Klaus, M.; Genzel, C.; Schock, H.-W.: In-situ studies of the recrystallization process of CuInS2 thin films by energy dispersive X-ray diffraction. Thin Solid Films 519 (2011), p. 7193-7196
doi:10.1016/j.tsf.2010.12.229


Wimpory, R.C.; Boin, M.: Emphasizing the accuracy of the uncertainty of residual stress determination using neutron diffraction. Procedia Engineering 10 (2011), p. 1639 - 1644
doi:10.1016/j.proeng.2011.04.274


Woracek, R.; Penumadu, D.; Kardjilov, N.; Hilger, A.; Strobl, M.; Wimpory, R.C.; Manke, I.; Banhart, J.: Neutron Bragg-edge-imaging for strain mapping under in situ tensile loading. Journal of Applied Physics 109 (2011), p. 093506/1-4
doi:10.1063/1.3582138


Zay, K.; Maawad, E.; Brokmeier, H.-G.; Wagner, L.; Genzel, Ch.: Influence of mechanical surface treatments on the high cycle fatigue performance of TIMETAL 54M. Materials Science and Engineering A 528 (2011), p. 2554 - 2558
doi:10.1016/j.msea.2010.12.064