Publikationen 2010
Arlt, T.; Manke, I.; Wippermann, K.; Schroeder, A.; Mergel, J.; Riesemeier, H.; Banhart, J.:
Röntgen-Kanten-Tomografie und -Radiografie zur Untersuchung von Alterungseffekten in Brennstoffzellenmaterialien. Materials Testing 52 (2010), p. 692-697
doi: 10.3139/120.110173
Bakai, A.S.; Shpak, A.P.; Wanderka, N.; Kotrechko, S.; Mazilova, T.I.; Mikhailovskij, I.M.:
Inherent strength of zirconium-based bulk metallic glass. Journal of Non-Crystalline Solids 356 (2010), p. 1310-1314
doi: 10.1016/j.jnoncrysol.2010.03.009
Banhart, J.; Borbely, A.; Dzieciol, K.; Garcia-Moreno, F.; Manke, I.; Kardjilov, N.; Kaysser-Pyzalla, A.R.; Strobl, M.; Treimer, W.:
X-ray and neutron imaging - Complementary techniques for materials science and engineering. International Journal of Materials Research 101 (2010), p. 1069-1079
doi: 10.3139/146.110382
Banhart, J.; Chang, C.S.T., Liang, Z.; Wanderka, N.; Lay, M.D.H.; Hill, A.J.:
Natural Aging in Al-Mg-Si Alloys - A Process of Unexpected Complexity. Advanced Engineering Materials 12 (2010), p. 559-571
doi: 10.1002/adem.201000041
Chang, C.S.T. ; Duggan, B.J.:
Relationships between rolled grain shape, deformation bands, microstructures and recrystallization textures in Al-5%Mg. Acta Materialia 58 (2010), p. 476-489
doi: 10.1016/j.actamat.2009.09.026
Chang, C.S.T.; Liang, Z.Q.; Banhart, J.:
Natural Ageing Al-Mg-Si Alloys. In: Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, JapanJapan Institute of Light Metals, 2010, p. 1061-1063
Chen, S.H.; Jin, P.P.; Schumacher, G.; Wanderka, N.:
Microstructure and interface characterization of a cast Mg2B2O5 whisker reinforced AZ91D magnesium alloy composite. Composites Science and Technology 70 (2010), p. 123-129
doi: 10.1016/j.compscitech.2009.09.015
Coelho, R.S.; Klaus, M.; Genzel, Ch.:
Through-thickness texture profiling by energy dispersive synchrotron diffraction. Journal of Applied Crystallography 43 (2010), p. 1322 - 1328
doi: 10.1107/S0021889810037210
Davies, C.M.; Wimpory, R.C.; Paradowska, A.M.; Nikbin, K.M.:
Residual Stress Measurements in Large Scale Component Sections. Materials Science Forum 652 (2010), p. 321-326
doi: 10.4028/www.scientific.net/MSF.652.321
Dixon, D.; Schröder, A.; Schökel, A.; Söhn Darmstadt, M.; Manke, I.; Kardjilov, N.; Sanders, T.; Loos, V.; Hoogers, G.; Wippermann, K.; Stolten, D.; Roth, C.:
Design of In-Situ Experimentation for the Study of Fuel Cells with X-rays and Neutrons. Materials Testing 52 (2010), p. 725-735
doi: 10.3139/120.110180
Dos Santos, J.F.; Olea, C.A.W.; Coelho. R.S.; Kostka, A.; Paglia, C.S.; Ghidini, T.; Donne, C.D.:
Metallurgy and weld performance in friction stir welding. In: Lohwasser, D.; Chen, Z. [Eds.] : Friction stir weldingBoca Raton, Fla.: CRC Press, 2010. - ISBN 978-1-4398-0211-3, p. 314--410
Figiel, H.; Gondek, L.; Ziarek, M.; Selvaraj, N.; Kardjilov, N.:
Zastosowanie radiografii oraz tomografii neutronowej w badaniach dla potrzeb energetyki wodorowej - Application of neutron radiography and tomography for research in the field of hydrogen energetics. Polskie Stowarzyszenie Wodoru i Ogniw Paliwowych - Polish Bulletin of Hydrogen and Fuel Cells Society 5 (2010), p. 35-40
Garcia-Moreno, F.; Mukherjee, M.; Solórzano, E.; Banhart, J.:
Metal foams - towards microcellular materials. International Journal of Materials Research 101 (2010), p. 1134-1139
doi: 10.3139/146.110385
Giere, P.; Möller, L.; Hilger, A.; Paulke, A.; Riesemeier, H.; Kuehbacher, M.:
Modern and classic approaches towards revealing the orbital mosaic in the common shrew Sorex araneus Linnaeus, 1758 (Soricidae, Lipotyphla, Mammalia). Zoosystematics and Evolution 86 (2010), p. 343 - 350
doi: 10.1002/zoos.201000016
Gleber, G.; Cibik, L.; Haas, S.; Hoell, A.; Müller, P.; Krumrey, M.:
Traceable size determination of PMMA nanoparticles based on Small Angle X-ray Scattering (SAXS). Journal of Physics: Conference Series 247 (2010), p. 12027/1-6
doi: 10.1088/1742-6596/247/1/012027
Open Access (external provider)
Griesche, A.; Zhang, B.; Solórzano, E.; Garcia-Moreno, F.:
Note: X-ray radiography for measuring chemical diffusion in metalli melts. Review of Scientific Instruments 81 (2010), p. 056104/1-3
doi: 10.1063/1.3427256
Grothausmann, R.; Manke, I.; Zehl, G.; Dorbandt, I.; Bogdanoff, P.; Fiechter, S.; Hentschel, M.P.; Lange, A.; Kupsch, A.; Hilger, A.; Banhart, J.:
Charakterisierung von Katalysatormaterialien für Brennstoffzellen mittels Elektronentomographie. Materials Testing 52 (2010), p. 706-711
doi: 10.3139/120.110174
Grupp, R.; Nöthe, M.; Kieback, B.; Banhart, J.:
In-situ investigation of the cooperative material transport during the early stage of sintering by synchrotron X-ray computed tomography. In: Bordia, R.K. [u.a.] [Eds.] : Advances in sintering science and technology : a collection of papers presented at the International Conference on Sintering, November 16 - 20, 2009, La Jolla, CaliforniaHoboken, NJ: Wiley, 2010. - ISBN 978-0-470-40849-0, p. 85-90
Haas, S.; Hoell, A.; Wurth, R.; Ruessel, C.; Boesecke, P.; Vainio, U.:
Analysis of nanostructure and nanochemistry by ASAXS: Accessing phase composition of oxyfluoride glass ceramics doped with Er3+/Yb3+. Physical Review B 81 (2010), p. 184207
doi: 10.1103/PhysRevB.81.184207
Open Access (external provider)
Haas, S.; Zehl, G.; Dorbandt, I.; Manke, I.; Bogdanoff, P.; Fiechter, S.; Hoell, A.:
Direct Accessing the Nanostructure of Carbon Supported Ru-Se Based Catalysts by ASAXS. The Journal of Physical Chemistry C 114 (2010), p. 22375-22384
doi: 10.1021/jp103340t
Haas, Sylvio:
Nanochemische Zusammensetzungsanalyse mittels anomaler Röntgenkleinwinkelstreuung (ASAXS): Erbium und Ytterbium dotierte Oxyfluorid-Glaskeramiken. , Humboldt Univ. Berlin, 2010
http://edoc.hu-berlin.de/dissertationen/haas-sylvio-2010-09-01/METADATA/abstract.php?id=37332
Open Access
Haibel, A.; Manke, I.; Melzer, A.; Banhart, J.:
In Situ Microtomographic Monitoring of Discharging Processes in Alkaline Cells. Journal of The Electrochemical Society 157 (2010), p. A387-A391
doi: 10.1149/1.3294566
Hartnig, C.; Manke, I.; Kupsch, A.:
Röntgen- und Neutronen – Einblicke in Brennstoffzellen. Materials Testing 52 (2010), p. 665-666
doi: 10.3139/120.010101
Hilger, A.; Kardjilov, N.; Kandemir, T.; Manke, I.; Banhart, J.; Penumadu, D.; Manescu, A.; Strobl, M.:
Revealing microstructural inhomogeneities with dark-field neutron imaging. Journal of Applied Physics 107 (2010), p. 036101/1-3
doi: 10.1063/1.3298440
Hoydalsvik, K.; Barnardo, T.; Winter, R.; Haas, S.; Tatchev, D.; Hoell, A.:
Yttria-zirconia coatings studied by grazing-incidence small-angle X-ray scattering during in situ heating. Physical Chemistry Chemical Physics 12 (2010), p. 14492-14500
doi: 10.1039/c0cp00472c
Open Access (external provider)
Jímenez, Catalina Elena:
Characterization and Modification of Powders Used to Make Al-Based Metal Foams = Charakterisierung und Modifizierung von Pulvern zur Herstellung von Metallschäumen auf Aluminium-Basis. , TU Berlin, 2010
https://www.depositonce.tu-berlin.de/handle/11303/2727
Open Access
Juricic, C.; Pinto, H.; Cardinali, D.; Klaus, M.; Genzel, Ch.; Pyzalla, A.R.:
Evolution of Microstructure and Internal Stresses in Multi-Phase Oxide Scales Grown on (110) Surfaces of Iron Single Crystals at 650 °C. Oxidation of Metals 73 (2010), p. 115 - 138
doi: 10.1007/s11085-009-9166-x
Open Access (external provider)
Juricic, C.; Pinto, H.; Cardinali, D.; Klaus, M.; Genzel, Ch.; Pyzalla, A.R.:
Effect of Substrate Grain Size on the Growth, Texture and Internal Stresses of Iron Oxide Scales Forming at 450 °C. Oxidation of Metals 73 (2010), p. 15-41
doi: 10.1007/s11085-009-9162-1
Open Access
Kamel, S.; Wimpory, R.; Hofmann, M.; Nikbinn K.M.; O'Dowd, N.P.:
Predicting the effect of compressive and tensile residual stresses in fracture mechanics specimens. Advanced Materials Research 89-91 (2010), p. 275-280
doi: 10.4028/www.scientific.net/AMR.89-91.275
Kamel, S.; Wimpory, R.C.; Hofmann, M.:
The Effects of Constraint and Compressive or Tensile Residual Stresses on Brittle Fracture. In: Proceedings of the ASME Pressure Vessels and Piping Conference, July 26-30, 2009, Prague, Czech Republic. Vol. 5New York: American Society of Mechanical Engineers, 2010. - ISBN 978-0-7918-4368-0, p. 305-313
doi: 10.1115/PVP2009-77191
Kannengiesser, Thomas; Kromm, Arne; Gibmeier, Jens; Rethmeier, Michael:
In-situ Analyse der Phasenumwandlungskinetik während des Schweißens. Materials Testing 52 (2010), p. 204-210
doi: 10.3139/120.110122
Kardjilov, N.; Hilger, A.; Dawson, M.; Manke, I.; Banhart, J.; Strobl, M.; Boeni, P.:
Neutron tomography using an elliptic focusing guide. Journal of Applied Physics 108 (2010), p. 034905/1-4
doi: 10.1063/1.3467796
Open Access (external provider)
Kasyutich, O.; Ilari, A.; Fiorillo, A.; Tatchev, D.; Hoell, A.; Ceci, P.:
Silver Ion Incorporation and Nanoparticle Formation inside the Cavity of Pyrococcus furiosus Ferritin: Structural and Size-Distribution Analyses. Journal of the American Chemical Society 132 (2010), p. 3621-3627
doi: 10.1021/ja910918b
Open Access (external provider)
Keppas, L.K.; Wimpory, R.C.; Katsareas, D.E.; Anifantis, N.K.; Youtsos, A.G.:
Evaluation of residual stress assessment methods using a repair weld benchmark. Journal of Strain Analysis for Engineering Design 45 (2010), p. 197-208
doi: 10.1243/03093247JSA558
Keppas, L.K.; Wimpory, R.C.; Katsareas, D.E.; Ohms, C.:
Combination of simulation and experiment in designing repair weld strategies: A feasibility study. Nuclear Engineering and Design 240 (2010), p. 2897-2906
doi: 10.1016/j.nucengdes.2010.05.034
Kieback, B.; Nöthe, M.; Banhart, B.; Grupp, R.:
Investigation of Sintering Processes by Tomography. Materials Science Forum 638-642 (2010), p. 2511-2516
doi: 10.4028/www.scientific.net/MSF.638-642.2511
Kirchlechner, C.; Martinschitz, K.J.; Daniel, R.; Klaus, M.; Genzel, C.; Mitterer, C.; Keckes, J.:
Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction. Thin Solid Films 518 (2010), p. 2090 - 2096
doi: 10.1016/j.tsf.2009.08.011
Klages, M.; Krüger, P.; Haussmann, J.; Markötter, H.; Arlt, T.; Hartnig, C.; Kardjilov, N.; Banhart, J.; Manke, I.; Scholta, J.:
Untersuchung des Einflusses von GDL-Eigenschaften auf den Wasserhaushalt mittels Neutronenradiografie = Investigation of the influence of GDL properties on the water balance by means of neutron radiography. Materials Testing 52 (2010), p. 718-724
doi: 10.3139/120.110176
Krueger, P.; Markötter, H.; Klages, M.; Haussmann, J.; Arlt, T.; Riesemeier, H.; Hartnig, C.; Banhart, J.; Manke, I.; Scholta, J.:
Dreidimensionale Untersuchung der Wasserverteilung in einer Miniatur-PEM-Brennstoffzelle = Three-dimensional investigation of water distribution in a miniature PEM fuel cell. Materials Testing 52 (2010), p. 712-717
doi: 10.3139/120.110177
Kumar, G.S.V.; Murty, B.S.; Chakraborty, M.:
Effect of TiAl3 particles size and distribution on their settling and dissolution behaviour in aluminium. Journal of Materials Science 45 (2010), p. 2921-2929
doi: 10.1007/s10853-010-4284-z
Kumar, G.S.V.; Murty, B.S.; Chakraborty, M.:
Settling behaviour of TiAl3, TiB2, TiC and AlB2 particles in liquid Al during grain refinement. International Journal of Cast Metals Research 23 (2010), p. 193-204
doi: 10.1179/136404610X12665088537491
Kumar, G.S.V.; Sundarraj, S.:
A Novel Characterization Technique to Determine Pore Susceptibility of Alloying Elements in Aluminum Alloys. Metallurgical and Materials Transaction B 41 (2010), p. 495-499
doi: 10.1007/s11663-010-9379-z
Kupsch, A.; Lange, A.; Hentschel, M.P.; Manke, I.; Kardjilov, N.; Arlt, T.; Grothausmann, R.:
Rekonstruktion limitierter CT-Messdatensätze von Brennstoffzellen mit Directt = Reconstruction of limited CT data sets of fuel cells with Directt. Materials Testing 52 (2010), p. 676-683
doi: 10.3139/120.110178
Open Access (external provider)
Lange, A.; Hentschel, M.P.; Kupsch, A.; Manke, I.; Kardjilov, N.; Arlt, T.; Grothausmann, R.:
Rekonstruktion limitierter CT-Datensätze von Brennstoffzellen mit DIRECTT. In: ZfP in Forschung, Entwicklung und Anwendung : Erfurt, 10.-12. Mai 2010 ; DGZfP-Jahrestagung 2010 Zerstörungsfreie Materialprüfung / DGZfP, Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V.Berlin: DGZfP, 2010. - ISBN 978-3-940283-26-9, p. 1-11 (CD-ROM)
Lee, S.W.; Kim, K.-Y.; Kwon, O.Y.; Kardjilov, N.; Dawson, M.; Hilger, A.; Manke, I.:
Observation of Magnetic Domains in Insulation-Coated Electrical Steels by Neutron Dark-Field Imaging. Applied Physics Express 3 (2010), p. 106602/1-3
doi: 10.1143/APEX.3.106602
Liang, Z.; Chang, C.S.T.; Wanderka, N.; Banhart, J.; Hirsch, J.:
The effect of Fe, Mn and trace elements on precipitation in Al-Mg-Si alloy. In: Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, JapanJapan Institute of Light Metals, 2010, p. 492-497
Maawad, E.; Brokmeier, H. -G.; Hofmann, M.; Genzel, Ch.; Wagner, L.:
Stress distribution in mechanically surface treated Ti-2.5Cu determined by combining energy-dispersive synchrotron and neutron diffraction. Materials Science and Engineering A 527 (2010), p. 5745-5749
doi: 10.1016/j.msea.2010.05.044
Open Access (external provider)
Maier, W.; Arlt, T.; Wannek, C.; Manke, I.; Riesemeier, H.; Krüger, P.; Scholta, J.; Lehnert, W.; Banhart, J.; Stolten, D.:
In-situ synchrotron X-ray radiography on high temperature polymer electrolyte fuel cells. Electrochemistry Communications 12 (2010), p. 1436-1438
doi: 10.1016/j.elecom.2010.08.002
Manke, I.; Hartnig, C.; Kardjilov, N.; Riesemeier, H.; Goebbels, J.; Kuhn, R.; Krüger, P.; Banhart, J.:
In situ Synchrotron X-ray Radiography Investigations of Water Transport in PEM Fuel Cells. Fuel Cells 10 (2010), p. 26-34
doi: 10.1002/fuce.200800123
Manke, I.; Kardjilov, N.; Schäfer, R.; Hilger, A.; Strobl, M.; Dawson, M.; Grünzweig, C.; Behr, G.; Hentschel, M.; David, C.; Kupsch, A.; Lange, A.; Banhart, J.:
Three-dimensional imaging of magnetic domains. Nature Communications 1 (2010), p. 125/1-6
doi: 10.1038/ncomms1125
Markötter, H.; Manke, I.; Hartnig, C.; Krüger, P.; Wippermann, K.; Arlt, T.; Choinka, G.; Riesemeier, H.; Banhart, J.:
Hochauflösende Synchrotron-Radiografie : Charakterisierung von Co2- und Wasserverteilungen in Direktmethanol- und Polymerelektrolytmembran-Brennstoffzellen. Materials Testing 52 (2010), p. 698-704
doi: 10.3139/120.110179
Matsushima, U.; Graf, W.; Kardjilov, N.; Herppich, W.B.:
Non-Destructive Measurement of Water Flow in Small Plants Using Cold Neutron Radiography - an Application to Investigate Bent-Neck Symptom of Cut Roses. In: W.B. Herppich [Ed.] : Proceedings of the IIIrd International Conference Postharvest Unlimited 2008 : Berlin, Germany, November 5 - 7, 2008 , 2010 (Acta Horticulturae ; 858). - ISBN 978-90-66052-06-2 , p. 387-392
http://www.actahort.org/books/858/858_59.htm
Matsushima, U.; Graf, W.; Kardjilov, N.; Hilger, A.; Nishizawa, T.; Gruneberg, H.; Herppich, W.B.:
Water Flow in Cut Rose Peduncles - Destructive and Non Destructive Measurement Methods. In: Y. Ueda [Ed.] : Proceedings of the Vth International Symposium on Rose Research and Cultivation : Gifu, Japan, May 24 - 28, 2009Leuven: ISHS, Int. Soc. for Horticultural Science, 2010 (Acta horticulturae : technical communications of ISHS; 870). - ISBN 978-90-6605-489-9, p. 257-262
http://www.actahort.org/books/870/870_34.htm
Matsushima, U.; Graf, W.; Zabler, S.; Manke, I.; Dawson, M.; Choinka, G.; Herppich, W.B.:
Röntgen-Synchrotron Computer-Tomographie zur zerstörungsfreien Analyse der funktionellen Pflanzenanatomie. Bornimer agrartechnische Berichte 73 (2010), p. 64-71
http://opus.kobv.de/slbp/volltexte/2011/3782/pdf/Heft_73_ge.pdf
Open Access
Mechler, S.; Macht, M.-P.; Schumacher, G.; Zizak, I.; Wanderka, N.:
Frustration of the stable Zr-Ti-Ni quasicrystal as the basis of glass formation. Physical Review B 81 (2010), p. 180101(R)/1-4
doi: 10.1103/PhysRevB.81.180101
Mechler, S.; Schumacher, G.; Koteski, V.; Riesemeier, H.; Schafers, F.; Mahnke, H.-E.:
Local structure and site substitution in amorphous and quasicrystalline Zr-Ti-Ni-(Cu) alloys. Applied Physics Letters 97 (2010), p. 041914/1-3
doi: 10.1063/1.3467265
Mechler, S.; Wanderka, N.; Macht, M.-P.:
Interdependence between glass stability and phase formation sequence during crystallization of Zr46.8Ti8.2Cu7.5Ni10Be27.5 bulk glass. International Journal of Materials Research 101 (2010), p. 601-610
doi: 10.3139/146.110324
Michalcová, A.; Vojtech, D.; Schumacher, G.; Novák, P.; Klementová, M.; Serák, J.; Mudrová, M.; Valdaufová, J.:
Influence of cooling rate and cerium addition on rapidly solidified Al-TM alloys. KOVOVE MATERIALY-METALLIC MATERIALS 48 (2010), p. 1-7
doi: 10.4149/km_2010_1_1
Mukherjee, M.; Garcia-Moreno, F.; Banhart, J.:
Defect generation during solidification of aluminium foams. Scripta Materialia 63 (2010), p. 235-238
doi: 10.1016/j.scriptamat.2010.03.064
Mukherjee, M.; Garcia-Moreno, F.; Banhart, J.:
Collapse of aluminium foam in two different atmospheres. Metallurgical and Materials Transactions B 41 (2010), p. 500-504
doi: 10.1007/s11663-010-9357-5
Mukherjee, M.; Garcia-Moreno, F.; Banhart, J.:
Solidification of metal foams. Acta Materialia 58 (2010), p. 6358-6370
doi: 10.1016/j.actamat.2010.07.057
Mukherjee, M.; Garcia-Moreno, F.; Jimenez, C.; Banhart, J.:
Al and Zn Foams Blown by an Intrinsic Gas Source. Advanced Engineering Materials 12 (2010), p. 472-477
doi: 10.1002/adem.201000017
Mukherjee, M.; Ramamurty, U.; Garcia-Moreno, F.; Banhart, J.:
The effect of cooling rate on the structure and properties of closed-cell aluminium foams. Acta Materialia 58 (2010), p. 5031-5042
doi: 10.1016/j.actamat.2010.05.039
Nayak, S.S.; Wollgarten, M.; Banhart, J.; Pabi, S.K.; Murty, B.S.:
Nanocomposites and an extremely hard nanocrystalline intermetallic of Al-Fe alloys prepared by mechanical alloying. Materials Science and Engineering A 527 (2010), p. 2370-2378
doi: 10.1016/j.msea.2009.12.044
Ohms, C.; Wimpory, R.; Neov, D.:
Residual stress measurement by neutron diffraction in a single bead on plate weld - Influence of instrument and measurement settings on the scatter of the results. Materials Science Forum 638-642 (2010), p. 2452-2457
doi: 10.4028/www.scientific.net/MSF.638-642.2452
Ohms, C.; Wimpory, R.C.; Neov, D.; Hofmann, M.; Turski, M.; Haigh, R.; Fitzpatrick, M.; Edwards, L.:
Residual Stress Measurements in a Three-Bead Slot Weld in a 20 mm Carbon Steel Plate. In: Proceedings of the ASME Pressure Vessels and Piping Conference, July 26-30, 2009, Prague, Czech Republic. Vol. 6, Parts A and BNew York: American Society of Mechanical Engineers, 2010. - ISBN 978-0-7918-4369-7, p. 469-479
doi: 10.1115/PVP2009-77496
Prashanth, K.G.:
Comment on the paper 'Thermal stability of the Al70Ni10Ti10Zr5Ta5 amorphous alloy powder fabricated by mechanical alloying' by Xiu Wei, Xinfu Wang, Fusheng Han, Haowen Xie, Cui'e Wen, J. Alloys Compd. 496 (2010) 313-316. Journal of Alloys and Compounds 507 (2010), p. L32-L34
doi: 10.1016/j.jallcom.2010.07.209
Prashanth, K.G.:
Influence of Mechanical Activation on Decomposition of Titanium Hydride. Materials and Manufacturing Processes 25 (2010), p. 974-977
doi: 10.1080/10426911003720870
Prashanth, K.G.; Murty, B.S.:
Production, Kinetic Study and Properties of Fe-Based Glass and Its Composites. Materials and Manufacturing Processes 25 (2010), p. 592-597
doi: 10.1080/10426910903536808
Quadir, M.Z.; Chang, C.S.T.; Duggan, B.J.:
Formation of the Goss Texture in a Thin Foil Experiment on Fe-3,2%Si. ISIJ International 50 (2010), p. 264-271
Rack, A.; Garcia-Moreno, F.; Schmitt, C.; Betz, O.; Cecilla, A.; Ershov, A.; Rack, T.; Banhart, J.; Zabler, S.:
On the possibilities of hard X-ray imaging with high spatio-temporal resolution using polychromatic synchrotron radiation. Journal of X-Ray Science and Technology 18 (2010), p. 429-441
doi: 10.3233/XST-2010-0273
Rebelo Kornmeier, J.; Gibmeier, J.; Hofmann, M.; Wimpory, R.:
Optimising the neutron diffractometer STRESS-SPEC for surface strain scanning. In: FRM II, Technische Universität München [Ed.] : Annual Report 2010München, 2010, p. 25-26
http://cdn.frm2.tum.de/fileadmin/stuff/information/documents/annualReports/ar2010-onlinekl.pdf
Rolfs, K.; Wimpory, R.C.; Petry, W.; Schneider, R.:
Effect of alloying Ni-Mn-Ga with Cobalt on thermal and structural properties. Journal of Physics: Conference Series 251 (2010), p. 012046/1-4
doi: 10.1088/1742-6596/251/1/012046
Open Access (external provider)
Schröder, A.; Wippermann, K.; Lehnert, W.; Stolten, D.; Sanders, T.; Baumhöfer, T.; Kardjilov, N.; Hilger, A.; Banhart, J.; Manke, I.:
The influence of gas diffusion layer wettability on direct methanol fuel cell performance: A combined local current distribution and high resolution neutron radiography study. Journal of Power Sources 195 (2010), p. 4765-4771
doi: 10.1016/j.jpowsour.2010.02.057
Sterli, J.; Müller, J.; Anquetin, J.; Hilger, A.:
The parabasisphenoid complex in Mesozoic turtles and the evolution of the testudinate basicranium. Canadian Journal of Earth Sciences 47 (2010), p. 1337 - 1346
doi: 10.1139/E10-061
Open Access (external provider)
Sumin, V.V.; Sheverev, S.G.; Schneider, R.; Wimpory, R.; Balagurov, A.M.:
Results of Measuring the Residual Strains in the WWER-1000 Reactor Vessel. Physics of the Solid State 52 (2010), p. 992 - 995
doi: 10.1134/S1063783410050227
Surreddi, K.B.; Scudino, S.; Sakaliyska, M.; Prashanth, K.G.; Sordelet, D.J.; Eckert, J.:
Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder. Journal of Alloys and Compounds 491 (2010), p. 137-142
doi: 10.1016/j.jallcom.2009.10.178
Tang, Y.; Zhao, D.; Chen, J.; Wanderka, N.; Shen, D.; Fang, F.; Guo, Z.; Zhang, J.; Wan, X.:
Capillary-driven assembly of ZnO nanowire arrays into micropatterns. Materials Chemistry and Physics 121 (2010), p. 541-548
doi: 10.1016/j.matchemphys.2010.02.018
Tatchev, D:
Multiphase approximation for small-angle scattering. Journal of Applied Crystallography 43 (2010), p. 8-11
doi: 10.1107/S0021889809048675
Thiedmann, R.; Manke, I.; Lehnert, W.; Schmidt, V.:
Strukturelle Analyse des Porenraumes von Gasdiffusionslagen in Brennstoffzellen mittels geometrischer 3-D-Graphen. Materials Testing 52 (2010), p. 736-743
doi: 10.3139/120.110181
Open Access (external provider)
Timpel, M.; Wanderka, N.; Murty, B.S.; Banhart, J.:
Three-dimensional visualization of the microstructure development of Sr-modified Al-15Si casting alloy using FIB-EsB tomography. Acta Materialia 58 (2010), p. 6600-6608
doi: 10.1016/j.actamat.2010.08.021
Tötzke, C.; Hilger, A.; Arlt, T.; Markötter, H.ng; Choinka, G.; Kardjilov, N.; Schröder, A.; Wippermann, K.; Scholta, J.; Hartnig, C.; Banhart, J.; Manke, I.:
Hochortsauflösendes, großflächiges Neutronen-Detektorsystem für die Brennstoffzellenforschung. Materials Testing 52 (2010), p. 684-691
doi: 10.3139/120.110182
Triolo, R.; Giambona, G.; Lo Celso, F.; Ruffo, I.; Kardjilov, N.; Hilger, A.; Manke, I.; Paulke, A.:
Combined application of x-ray and neutron imaging techniques to wood materials. Conservation Science in Cultural Heritage 10 (2010), p. 143 - 152
doi: 10.6092/issn.1973-9494/2322
Vierke, J.; Schumacher, G.; Pilyugin, V.P.; Denks, I.A.; Zizak, I.; Wolf, C.; Wanderka, N.; Wollgarten, M.; Banhart, J.:
Deformation-induced crystallization in amorphous Al85Ni1La5 alloy. Journal of Alloys and Compounds 493 (2010), p. 683-691
doi: 10.1016/j.jallcom.2009.12.191
Wanderka, N.; Isheim, D.; Bakai, A.; Abromeit, C.; Seidman, D.N.:
Microstructural stability of a Ni-Mo based Hastelloy after 10 MeV electron irradiation at high temperature. International Journal of Materials Research 101 (2010), p. 631-636
Witzmann, F.; Scholz, H.; Müller, J.; Kardjilov, N.:
Sculpture and vascularization of dermal bones, and the implications for the physiology of basal tetrapods. Zoological journal of the Linnean Society 160 (2010), p. 302 - 340
doi: 10.1111/j.1096-3642.2009.00599.x
Yusuf, S.M.; Mukadam, M.D.; De Teresa, J.M.; Ibarra, M.R.; Kohlbrecher, J.; Heinemann, A.; Wiedenmann, A.:
Structural and magnetic properties of amorphous iron oxide. Physica B 405 (2010), p. 1202 - 1206
doi: 10.1016/j.physb.2009.11.040
Zabler, S.; Rack, A.; García-Moreno, F.; Ershov, A.; Baumbach, T.; Banhart,J.:
Imaging fast processes in liquid metal foams and semi-solid alloys using synchrotron radioscopy with spatio-temporal micro-resolution. In: Kannengiesser, T. [u.a.] [Eds.] : In-situ studies with photons, neutrons and electrons scatteringBerlin: Springer, 2010. - ISBN 978-3-642-14793-7, p. 149-158
Zabler, S.; Rack, A.; Rueda, A.; Helfen, L.; Garcia-Moreno, F.; Banhart, J.:
Direct observation of particle flow in semi-solid alloys by synchrotron X-ray micro-radioscopy. Physica Status Solidi A 207 (2010), p. 718-723
doi: 10.1002/pssa.200925329
Zils, S.; Timpel, M.; Arlt, T.; Wolz, A.; Manke, I.; Roth, C.:
3D Visualisation of PEMFC Electrode Structures Using FIB Nanotomography. Fuel Cells 10 (2010), p. 966-972
doi: 10.1002/fuce.201000133