7T-MPW-EDDI

7T-MPW-EDDI

Publikationen

2018

Hollmann, Andreas; Klaus, Manuela; Genzel, Christoph; Aminforoughi, Behzad; Degener, Sebastian; Brenne, Florian; Niendorf, Thomas: Depth-resolved residual stress analysis in coarse-grained additive manufactured materials by energy-dispersive diffraction. , 10th European Conference on Residual Stresses (ECRS 10) Leuven, BELGIUM, 11.09.2018 - 14.09.2018 (2018)

Villa, M.; Niessen, F.; Somers, M.A.J.: In Situ Investigation of the Evolution of Lattice Strain and Stresses in Austenite and Martensite During Quenching and Tempering of Steel. , Metallurgical and Materials Transactions A 49A (2018), p. 28-40
doi:10.1007/s11661-017-4387-0

Stephan-Scherb, C.; Nützmann, K.; Kranzmann, A.; Klaus, M.; Genzel, C.: Real time observation of high temperature oxidation and sulfidation of Fe-Cr model alloys. , Materials and Corrosion = Werkstoffe und Korrosion 69 (2018), p. 678-689
doi:10.1002/maco.201709892

Klaus, Manuela: Tackling Sophisticated Cases in X-Ray Stress Analysis by Means of Energy-Dispersive Diffraction. , European Conference on Residual Stresses Belgium, Leuven, 11.09.2018 - 14.09.2018 (2018)

Mishurova, T.; Cabeza, S.; Thiede, T.; Nadammal, N.; Kromm, A.; Klaus, M.; Genzel, C.; Haberland, C.; Bruno, G.: The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts. , Metallurgical and Materials Transactions A 49 (2018), p. 3038-3046
doi:10.1007/s11661-018-4653-9

Hollmann, Andreas; Klaus, Manuela; Genzel, Christoph; Aminforoughi, Behzad; Degener, Sebastian; Brenne, Florian; Niendorf, Thomas: Tiefenaufgelöste Eigenspannungsanalyse an grobkristallinen, additiv gefertigten Werkstoffen mittels energiedispersiver Beugung. , Fachausschuss 13 der AWT - Eigenspannungen Leibniz-Institut für Werkstofforientierte Technologien, Bremen, 17.04.2018 - 18.04.2018 (2018)

Riedel, Jens-Uwe; Lipp, Vera; Klaus, Manuela: Wasserstoffversprödung bei galvanischen Prozessen - ein Phänomen zwischen ewigen Weisheiten und neuen Untersuchungsergebnissen? , ZVO Oberflächentage (Kongress für Galvano- und Oberflächentechnik) Leipzig, 19.09.2018 - 21.09.2018 (2018)

2017

Klaus, Manuela: 14 years EDDI - looking back and forward. , EDDI workshop Berlin, 14.12.2017 - 14.12.2017 (2017)

Mishurova, T.; Cabeza, S.; Artzt, K.; Haubrich, J.; Klaus, M.; Genzel, C.; Requena, G.; Bruno, G.: An assessment of subsurface residual stresses analysis in SLM Ti-6Al-4V. , Materials 10 (2017), p. 348/1-14
doi:10.3390/ma10040348

Meixner, M.; Apel, D.; Klaus, M.; Genzel, C.: Analyse dreiachsiger Eigenspannungsfelder mittels Röntgendiffraktion: Abtragverfahren versus zerstörungsfreie Methoden. , AWT FA13 Fachausschusssitzung - Eigenspannungen Freiberg, 25.04.2017 - 26.04.2017 (2017)

Apel, Daniel; Meixner, Matthias; Zinn, Wolfgang; Liehr, Alex; Klaus, Manuela; Genzel, Christoph; Scholtes, Berthold: Analysis of multiaxial near-surface residual stress fields by energy- and angle-dispersive X-ray diffraction: Semi- versus nondestructive techniques. , Mecasens 2017 Skukuza, South Africa, 18.09.2017 - 22.09.2017 (2017)

Ahmad, B.; Fitzpatrick, M.E.: Analysis of Residual Stresses in Laser-Shock-Peened and Shot-Peened Marine Steel Welds. , Metallurgical and Materials Transactions A 48 (2017), p. 759-770
doi:10.1007/s11661-016-3867-y

Shokr, M.; Schlosser, D.; Abboud, A.; Algashi, A.; Tosson, A.; Conka, T.; Hartmann, R.; Klaus, M.; Genzel, C.; Strüder, L.; Pietsch, U.: Applications of a pnCCD detector coupled to columnar structure CsI(Tl) scintillator system in ultra high energy X-ray Laue diffraction. , Journal of Instrumentation 12 (2017), p. P12032/1-14
doi:10.1088/1748-0221/12/12/P12032

Márquez, J.; Stange, H.; Hages, C.; Schaefer, N.; Levcenko, S.; Giraldo, S.; Saucedo, E.; Schwarzburg, K.; Abou-Ras, D.; Redinger, A.; Klaus, M.; Genzel, C.; Unold, T.; Mainz, R.: Chemistry and dynamics of Ge in kesterite: towards band gap graded absorbers. , Chemistry of Materials 29 (2017), p. 9399-9406
doi:10.1021/acs.chemmater.7b03416

Okoro, S.C.; Niessen, F.; Villa, M.; Apel, D.; Montgomery, M.; Frandsen, F.J.; Pantleon, K.: Complementary Methods for the Characterization of Corrosion Products on a Plant-Exposed Superheater Tube. , Metallography, Microstructure, and Analysis 6 (2017), p. 22-35
doi:10.1007/s13632-016-0325-6

Ocaña, J.; González-Carrasco, J.; Lieblich, M.; Barriuso, S.; Porro, J.; de Lara, L.; Díaz, M.; Santiago, J.: Compressive Residual Stresses and Associated Surface Modifications Induced in Ti6Al4V by Laser Shock Processing. , In: C. Sommitsch ... [Ed.] : THERMEC 2016 : selected peer reviewed papers from the 9th International Conference on Processing & Manufacturing of Advanced Materials, May 29-June 03, 2016, Graz, Austria. Zürich: Trans Tech Publications, 2017 (Materials science forum ; 879). - ISBN 978-3-0357-1129-5, p. 1408-1413
doi:10.4028/www.scientific.net/MSF.879.1408

Toparli, B.M.; Smyth, N.; Fitzpatrick, M.E.: Effect of Treatment Area on Residual Stress and Fatigue in Laser Peened Aluminum Sheets. , Metallurgical and Materials Transactions A 48 (2017), p. 1519-1523
doi:10.1007/s11661-017-3962-8

Stegemann, R.; Cabeza, S.; Pelkner, M.; Lyamkin, V.; Sonntag, N.; Bruno, G.; Skrotzki, B.; Kreutzbruck, M.: Evaluation of High Spatial Resolution Imaging of Magnetic Stray Fields for Early Damage Detection. , AIP Conference Proceedings 1806 (2017), p. 110010/1-10
doi:10.1063/1.4974688

Heinemann, M.D.; Mainz, R.; Österle, F.; Rodriguez-Alvarez, H.; Greiner, D.; Kaufmann, C.A.; Unold, T.: Evolution of opto-electronic properties during film formation of complex semiconductors. , Scientific Reports 7 (2017), p. 48463/1-9
doi:10.1038/srep45463

Genzel, Christoph; Apel, Daniel; Meixnet, Matthias; Klaus, Manuela: Exploiting the features of energy-dispersive diffraction for depth-resolved residual stress analysis: From lab to synchrotron and back. , MECASENS 2017 Skukuza, 19.09.2017 - 21.09.2017 (2017)

Kamm, P.; Garcia-Moreno, F.; Neu, T.; Heim, K.; Mokso, R.; Banhart, J.: Fast Synchrotron X-Ray Tomography of Dynamic Processes in Liquid Aluminium Alloy Foam. , Advanced Engineering Materials 19 (2017), p. 1-6
doi:10.1002/adem.201600550

Hollmann, Andreas: Fortführung der ED-Analyse an additiv gefertigten Proben (austenitischer Stahl, Inconel718) – aktueller Wissensstand. , Projekttreffen Uni Kassel und Hannover Hannover, 30.11.2017 - 30.11.2017 (2017)

Klaus, Manuela; Apel, Daniel; Meixner, Matthias; Genzel, Christoph: Improving the efficency in energy-dispersive residual stress gradient analysis: How to gain maximum benefit with minimal expense? , Mecasens 2017 Skukuza, South Africa, 18.09.2017 - 22.09.2017 (2017)

Marquez-Prieto, Jose; Stange, Helena; Baeker, Jan P.; Levcenko, Sergej; Just, Justus; Redinger, Alex; Unold, Thomas; Mainz, Roland: In situ analysis ofthe In-Ga interdiffusion in rapid thermal processed CIGSe based solar cells. , European PV Solar Conference and Exhibition Amsterdam, 25.09.2017 - 29.09.2017 (2017)

Niessen, Frank; Villa, Matteo; Hald, John; Somers, Marcel AJ.: Kinetics analysis of two-stage austenitization in supermartensitic stainless steel. , Materials & Design 116 (2017), p. 8–15
doi:10.1016/j.matdes.2016.11.076

Gibmeier, J.; Rebelo-Kornmeier, J.; Strauss, T.: Local Residual Stress Depth Distribution in the Inner Gearing of a Case Hardened Sliding Collar "EDDI". , In: C. Sommitsch ... [Ed.] : THERMEC 2016 : selected peer reviewed papers from the 9th International Conference on Processing & Manufacturing of Advanced Materials, May 29-June 03, 2016, Graz, Austria. Zurich: TransTech Publ., 2017 (Materials science forum ; 879,1). - ISBN 978-3-0357-1129-5, p. 601-606
doi:10.4028/www.scientific.net/MSF.879.601

Biberger, J.; Füßer, H.-J.; Klaus, M.; Genzel, C.: Near-Surface and Depth-Dependent Residual Stress Evolution in a Piston Ring Hard Chrome Coating Induced by Sliding Wear and Friction. , Wear 376-377 (2017), p. 1502-1521
doi:10.1016/j.wear.2017.01.056

Klaus, M.; Genzel, C.: Nondestructive Separation of Residual Stress and Composition Gradients in Thin Films by Angle- and Energy-Dispersive X-Ray Diffraction. I. Theoretical Concepts. , Journal of Applied Crystallography 50 (2017), p. 252-264
doi:10.1107/S1600576716020598

Klaus, M.; Genzel, C.; García, J.: Nondestructive Separation of Residual Stress and Composition Gradients in Thin Films by Angle- and Energy-Dispersive X-Ray Diffraction. II. Experimental Validation. , Journal of Applied Crystallography 50 (2017), p. 265-277
doi:10.1107/S1600576716020604

Farajian, M.; Hardenacke, V.; Pfeiffer, W.; Klaus, M.; Kornmeier, J.R.: Numerical and experimental investigations on shot-peened high-strength steel by means of hole drilling, X-ray, synchrotron and neutron diffraction analysis. , Materials Testing 59 (2017), p. 161-165
doi:10.3139/120.110978

Genzel, Christoph: Optimierung von Bauteileigenschaften mittels “Residual stress engineering“ – Eine Betrachtung aus röntgenanalytischer Sicht. , Metallkunde-Kolloquium Lech am Arlberg, 19.04.2017 - 21.04.2017 (2017)

Browne, D.J.; García-Moreno, F.; Nguyen-Thi, H.; Zimmermann, G.; Kargl, L.; Mathiesen, R.H.; Griesche, A.; Minster, O.: Overview of In Situ X-Ray Studies of Light Alloy Solidification in Microgravity. , In: Solanki, Kiran ... [Ed.] : Magnesium Technology 2017. Cham: Springer, 2017. - ISBN 978-3-319-52391-0, p. 581-590
doi:10.1007/978-3-319-52392-7_80

Stange, H.; Brunken, S.; Greiner, D.; Heinemann, M.D.; Yani, D.A.B.; Wägele, L.; Schimdt, S.S.; Bäcker, J.P.; Kaufmann, C.A.; Klaus, M.; Scheer, R.; Genzel, C.; Mainz, R.: Stacking fault annihilation through grain growth in chalkopyrite thin films: a model supported by simulation and in-situ XRD. , European PV Solar Conference and Exhibition Amsterdam, 25.09.2017 - 29.09.2017 (2017)

Bartosik, M.; Holec, D.; Apel, D.; Klaus, M.; Genzel, Ch.; Keckes, J.; Arndt, M.; Polcik, P.; Koller, C.M.; Mayrhofer, P.H.: Thermal expansionof Ti-Al-N and Cr-Al-N coatings. , Scripta Materialia 127 (2017), p. 182-185
doi:10.1016/j.scriptamat.2016.09.022

Klaus, Manuela: Tiefenaufgelöste Analyse randschichtnaher Eigenspannungszustände mitels energiedispersiver Beugung: eine effiziente Methode zur Untersuchung komplexer Fragestellungen. , AWT Fachausschusssitzung "Eigenspannungen" Braunschweig, 10.10.2017 - 11.10.2017 (2017)

Genzel, Christoph: Weiße Röntgenstrahlung als vielseitig nutzbare Sonde für Eigenspannungsmessungen: vom Labor zum Synchrotron und zurück. , AWT Fachausschusssitzung "Eigenspannungen" Braunschweig, 10.10.2017 - 11.10.2017 (2017)

Genzel, Christoph; Apel, Daniel; Meixner, Matthias; Klaus, Manuela: Weiße Röntgenstrahlung als vielseitig nutzbare Sonde für Eigenspannungsmessungen: Vom Labor zum Synchrotron und zurück. , AWT Fachausschuss-Sitzung “Eigenspannungen” Braunschweig, 10.10.2017 - 11.10.2017 (2017)

2016

Mainz, R.; Sanli, E.S.; Stange, H.; Azulay, D.; Brunken, S.; Greiner, D.; Hajaj, S.; Heinemann, M.D.; Kaufmann, C.A.; Klaus, M.; Ramasse, Q.M.; Rodriguez Alvarez, H.; Weber, A.; Balberg, I.; Millo, O.; van Aken, P.A.; Abou-Ras, D.: Annihilation of structural defects in chalcogenide absorber films for high-efficiency solar cells. , Energy & Environmental Science 9 (2016), p. 1818-1827
doi:10.1039/c6ee00402d

Send, S.; Abboud, A.; Wiesner, N.; Shokr, M.; Klaus, M.; Genzel, C.; Conka-Nurdan, T.; Schlosser, D.; Huth, M.; Hartmann, R.; Strüder, L.; Pietsch, U.: Application of a pnCCD for energy-dispersive Laue diffraction with ultra-hard X-rays. , Journal of Applied Crystallography 49 (2016), p. 222 - 233
doi:10.1107/S1600576715023997

Escudero, J.; Notario, B.; Jimenez, C.; Rodriguez-Perez, M.A.: Characterization of nanoclay intercalation during foaming with in situ energy-dispersive X-ray diffraction. , Journal of Applied Polymer Science 133 (2016), p. 43432/1-9
doi:10.1002/APP.43432

Boin, Mirko: Complementary use of Neutron, Synchrotron & X-ray diffraction for Material Science - Example: Residual Stress Analysis. , Automotive‘Expo 2016 Budapest, Ungarn, 19.10.2016 - 21.10.2016 (2016)

Stange, H.; Brunken, S.; Greiner, D.; Heinemann, M.-D.; Alexander, C.; Simon, S.; Bäcker, J.-P.; Klaus, M.; Genzel, C.; Mainz, R.: Diffusion-induced grain boundary migration as mechanism for grain growth and defect annihilation in chalcopyrite thin films. , Acta Materialia 111 (2016), p. 377-384
doi:10.1016/j.actamat.2016.03.073

Garces, G.; Mathis, K.; Perez, P.; Capek, J.; Adeva, P.: Effect of reinforcing shape on twinning in extruded magnesium matrix composites. , Materials Science and Engineering A 666 (2016), p. 48-53
doi:10.1016/j.msea.2016.04.028

Genzel, Christoph: Eigenspannungsanalyse mit Diffraktionsmethoden in der industriellen Forschung: Grundlagen, Möglichkeiten und Grenzen. , Schaeffler - Werkstoffseminar Herzogenaurach, 01.12.2016 - 01.12.2016 (2016)

Mainz, R.; Rodriguez-Alvarez, H.; Klaus, M.; Thomas, D.; Lauche, J.; Weber, A.; Heinemann, M.D.; Brunken, S.; Greiner, D.; Kaufmann, C.A.; Unold, T.; Schock, H.-W.; Genzel, C.: Erratum: Sudden stress relaxation in compound semiconductor thin films triggered by secondary phase segregation. , Physical Review B 93 (2016), p. 159902/1
doi:10.1103/PhysRevB.93.159902

Götze, L.C.; Milke, R.; Zizak, I.; Wirth, R.: In situ monitoring and ex situ TEM analyses of spinel (MgAl2O4) growth between (111)-oriented periclase (MgO) substrates and Al2O3 thin films. , Journal of Materials Science 51 (2016), p. 8824-8844
doi:10.1007/s10853-016-0130-2

Pistor, P.; Mainz, R.; Heinemann, M.D.; Unold, T.; Scheer, R.: In Situ Real-Time Characterization of Thin-Film Growth. , In: In situ real-time characterization of thin-film growth. Weinheim: Wiley, 2016. - ISBN 978-3-527-41003-3, p. 441-468
doi:10.1002/9783527699025.ch16

Platt, P.; Lunt, D.; Polatidis, E.; Wenman, M.R.; Preuss, M.: In-situ digital image correlation for fracture analysis of oxides formed on zirconium alloys. , Corrosion Science 111 (2016), p. 344-351
doi:10.1016/j.corsci.2016.05.026

García, J.; Pinto, H.; Ramos, E.; Espinoza, C.; Östby, J.; Coelho, R.: In-situ high temperature stress analysis of Ti(C,N) coatings on functionally graded cemented carbides by energy dispersive synchrotron X-ray diffraction. , International Journal of Refractory Metals and Hard Materials 56 (2016), p. 27 - 34
doi:10.1016/j.ijrmhm.2015.12.001

Niessen, F.; Villa, M.; Apel, D.; Keßler, O.; Reich, M.; Hald, J.; Somers, M.A.J.: In-situ investigation of the kinetics of reverse austenite formation in supermartensitic stainless steel. , THERMEC - International Conference on Processing and Manufacturing of Adavanced Materials Graz, 29.05.2016 - 03.06.2016 (2016)

Genzel, Christoph; Klaus, Manuela: Influence of the elastic anisotropy on depth-resolved X-ray residual stress analysis performed in the energy-dispersive diffraction mode. , ICRS-10 Sydney, 03.07.2016 - 07.07.2016 (2016)

Klaus, Manuela: Nondestructive Approaches for Separating Stress and Composition Gradients in Surface Layers by X-Ray Diffraction: a Comparative Assessment. , 10th International Conference on Residual Stresses Sydney, 03.07.2016 - 07.07.2016 (2016)

Baumgärtel, P.; Witt, M.; Baensch, J.; Fabarius, M.; Erko, A.; Schäfers, F.; Schirmacher, H.: RAY-UI: A Powerful and Extensible User Interface for RAY. , AIP Conference Proceedings 1741 (2016), p. 040016/1-4
doi:10.1063/1.4952888

Cucatti, S.; Droppa, R.; Figueroa, C.A.; Klaus, M.; Genzel, Ch.; Alvarez, F.: Residual stress in nano-structured stainless steel (AISI 316L) prompted by Xe+ ion bombardment at different impinging angles. , Journal of Applied Physics 120 (2016), p. 145306/1-7
doi:10.1063/1.4964429

Klaus, M.; Garcia-Moreno, F.: The 7T-MPW-EDDI beamline at BESSY II. , Journal of Large Scale Research Facilities JLSRF 2 (2016), p. A-40
doi:10.17815/jlsrf-2-63

Apel, Daniel; Liehr, Alexander; Meixner, Matthias; Klaus, Manuela; Degener, Sebastian; Wagener, Guido; Franz, Christian; Zinn, Wolfgang; Genzel, Christoph; Scholtes, Berthold: The 8-circle diffractometer system LEDDI for energy-dispersive near surface analysis of structural and residual stress gradients. , ICRS 10 Sydney, Australia, 03.07.2016 - 07.07.2016 (2016)

Brito, P.; Pinto, H.; Kostka, A.: The crystallographic template effect assisting the formation of stable α-Al2O3 during low temperature oxidation of Fe-Al alloys. , Corrosion Science 105 (2016), p. 100-108
doi:10.1016/j.corsci.2016.01.007

Lieblich, M.; Barriuso, S.; Multigner, M.; González-Doncel, G.; Gonzalez-Carrasco, J.L.: Thermal oxidation of medical Ti6Al4V blasted with ceramic particles: effects on the microstructure, residual stresses and mechanical properties. , Corrosion Science 63 (2016), p. 390 - 398
doi:10.1016/j.jmbbm.2016.07.011

2015

Sticchi, M.; Staron, P.; Meixner, M.; Klaus, M.; Rebelo-Kornmeier, J.; Huber, N.; Kashaev, N.: A parametric study of laser spot size and coverage on the laser shock peening induced residual stress in thin aluminium samples. , The Journal of Engineering (2015), p. 1-9
doi:10.1049/joe.2015.0106

Platt, P.; Polatidis, E.; Frankel, P.; Klaus, M.; Gass, M.; Howells, R.; Preuss, M.: A Study into Stress Relaxation in Oxides Formed on Zirconium Alloys. , Journal of Nuclear Materials 456 (2015), p. 415-425
doi:10.1016/j.jnucmat.2014.09.072

Klaus, Manuela: Analysis of Coating Systems by means of Diffraction Methods. , 29th International Conference on Surface Modification Technologies SMT 2015 Dänemark, Kopenhagen, 10.06.2015 - 12.06.2015 (2015)

Uhlmann, E.; Sammler, F.; Meixner, M.; Heinrich, D.; Gansert, F.; Reimers, W; Berger, D.; Rieck, I.: Analysis of residual stresses and wear mechanism of HF-CVD diamond coated cemetend carbide tools. , Production Engineering : Research and Developement 9 (2015), p. 99-107
doi:10.1007/s11740-014-0580-9

Stange, Helena; Brunken, Stephan; Rodriguez-Alvarez, Humberto; Greiner, Dieter; Christian, Kaufmann; Scheu, Anja; Lauche, Jakob; Schäfer, Norbert; Abou-Ras, Daniel; Mainz, Roland: Cu-poor/Cu-rich transition of co-evaporated CuInSe2: Na prevents annihilation of planar defects. , 79. Jahrestagung der DPG und DPG-Frühjahrstagung Berlin, 15.03.2015 - 20.03.2015 (2015)

Meixner, M.; Fuss, T.; Klaus, M.; Genzel, C.: Diffraction analysis of strongly inhomogeneous residual stress depth distributions by modification of the stress scanning method - I. Theoretical concept. , Journal of Applied Crystallography 48 (2015), p. 1451-1461
doi:10.1107/S160057671501448X

Meixner, M.; Fuss, T.; Klaus, M.; Genzel, M.; Genzel, C.: Diffraction analysis of strongly inhomogeneous residual stress depth distributions by modification of the stress scanning method - II. Experimental implementation. , Journal of Applied Crystallography 48 (2015), p. 1462 - 1475
doi:10.1107/S160057671501585X

Lentz, M.; Klaus, M.; Wagner, M.; Fahrenson, Ch.; Beyerlein, I. J.; Zecevic, M.; Reimers, W.; Knezevic, M.: Effect of age hardening on the deformation behavior of an Mg-Y-Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling. , Materials Science and Engineering A 628 (2015), p. 396-409
doi:10.1016/j.msea.2015.01.069

Gibson, J.L.; Jimenez, C.; Garcia De Andres, C.; Danon, C.A.; Luppo, M.I.: Evaluation of the Abnormal Grain Growth in an ASTM 213 Grade T91 Steel. , Procedia Materials Science 8 (2015), p. 1118-1126
doi:10.1016/j.mspro.2015.04.175

Witte, W.; Abou-Ras, D.; Albe, K.; Bauer, G.H.; Bertram, F.; Boit, C.; Brueggemann, R.; Christen, J.; Dietrich, J.; Eicke, A.; Hariskos, D.; Maiberg, M.; Mainz, R.; Meessen, M.; Mueller, M.; Neumann, O.; Orgis, T.; Paetel, S.; Pohl, J.; Rodriguez Alvarez, H.; Scheer, R.; Schock, H.-W.; Unold, T.; Weber, A.; Powalla, M.: Gallium gradients in Cu(In,Ga)Se2 thin-film solar cells. , Progress in Photovoltaics 23 (2015), p. 717–733
doi:10.1002/pip.2485

Scherg-Kurmes, H.; Körner, S.; Ring, S.; Klaus, M.; Korte, L.; Ruske, F.; Schlatmann, R.; Rech, B.; Szyszka, B.: High mobility In2O3:H as contact layer for a-Si:H/c-Si heterojunction and muc-Si:H thin film solar cells. , Thin Solid Films 594 (2015), p. 316-322
doi:10.1016/j.tsf.2015.03.022

Dabah, Eitan: Hydrogen Interaction with Supermartensitic Stainless Steel studied by Energy Dispersive X-Ray Diffraction. , 2015

Lentz, M.; Klaus, M.; Beyerlein, I.J.; Zecevic, M.; Reimers, W.; Knecevic, M.: In Situ X-Ray Diffraction and Crystal Plasticity Modeling of the Deformation Behavior of Extruded Mg-Li-(Al) Alloys: An Uncommon Tension-Compression Asymmetry. , Acta Materialia 86 (2015), p. 254-268
doi:10.1016/j.actamat.2014.12.003

Kühnapfel, S.; Nickel, N.H.; Gall, S.; Klaus, M.; Genzel, C.; Rech, B.; Amkreutz, D.: Preferential {100} grain orientation in 10 micrometer-thick laser crystallized multicrystalline silicon on glass. , Thin Solid Films 576 (2015), p. 68-74
doi:10.1016/j.tsf.2015.01.006

Zellmeier, M.; Rappich, J.; Klaus, M.; Genzel, C.; Janietz, S.; Frisch, J.; Koch, N.; Nickel, N.: Side chain engineering of poly-thiophene and its impact on crystalline silicon based hybrid solar cells. , Applied Physics Letters 107 (2015), p. 203301/1-4
doi:10.1063/1.4935751

Mainz, R.; Rodriguez Alvarez, H.; Klaus, M.; Thomas, D.; Lauche, J.; Weber, A.; Heinemann, M.D.; Brunken, S.; Greiner, D.; Kaufmann, C.A.; Unold, T.; Schock, H.-W.; Genzel, C.: Sudden stress relaxation in compound semiconductor thin films triggered by secondary phase segregation. , Physical Review B 92 (2015), p. 155310/1-8
doi:10.1103/PhysRevB.92.155310

Carter, N.J.; Mainz, R.; Walker, B.C.; Hages, C.J.; Just, J.; Klaus, M.; Schmidt, S.S.; Weber, A.; Yang, W.-C.D.; Zander, O.; Stach, E.A.; Unold, T.; Agrawal, R.: The role of interparticle heterogeneities in the selenization pathway of Cu-Zn-Sn-S nanoparticle thin films: a real-time study. , Journal of Materials Chemistry C 3 (2015), p. 7128-7134
doi:10.1039/c5tc01139f

Mainz, R.; Weber, A.; Rodriguez-Alvarez, H.; Levcenko, S.; Klaus, M.; Pistor, P.; Klenk, R.; Schock, H.-W.: Time-resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenization of metallic precursors. , Progress in Photovoltaics 23 (2015), p. 1131–1143
doi:10.1002/pip.2531

2014

Klaus, Manuela: Analysis of Coating Systems by Means of Diffraction Methods. , Materials Science Engineering MSE Darmstadt, 23.09.2014 - 25.09.2014 (2014)

Coelho, R.S.; Klaus, M.; Genzel, Ch.: Analysis of Texture Depth Distribution by Energy-Dispersive Diffraction. , Materials Science Forum 768-769 (2014), p. 36-43
doi:10.4028/www.scientific.net/MSF.768-769.36

Lentz, M.; Klaus, M.; Coelho, R.S.; Schäfer, N.; Schmack, F.; Reimers, W.; Clausen, B.: Analysis of the Deformation Behavior of Magnesium-Rare Earth Alloys Mg-2 pct Mn-1 pct Rare Earth and Mg-5 pct Y-4 pct Rare Earth by In Situ Energy-Dispersive X-Ray Synchrotron Diffraction and Elasto-Plastic Self-Consistent Modeling. , Metallurgical and Materials Transactions A 45A (2014), p. 5721-5735
doi:10.1007/s11661-014-2533-5

Jimenez, C.; Michaelis, M.; Kamm, P.-H.; Wagener, G.; Klaus, M.; Garcia-Moreno, F.; Genzel, C.: Applications of simultaneous synchrotron white-beam X-ray tomo- & radiographie to materials science research. , AWT, Fachausschuss 13 Eigenspannungen Kassel, Germany, 28.10.2014 - 28.10.2014 (2014)

Klaus, Manuela: Challenges in Diffraction Analysis of Thin Film Systems. , European Conference on Residual Stresses Troyes, Frankreich, 07.07.2014 - 10.07.2014 (2014)

Arakawa, Y.; Jiménez, C.; García-Moreno, F.; Banhart, J.; Rack, A.; Kobashi, M.; Kanetake, N.: Combustion foaming of Al-Ti intermetallics studied in situ by fast X-ray radioscopy. , Procedia Materials Science 4 (2014), p. 268-272
doi:10.1016/j.mspro.2014.07.558

Mainz, Roland: Control of microstructure by in-situ EDXRD and EDXRF during growth processes. , Autumn School on Microstructural Characterization and Modelling of Thin-Film Solar Cells Resort Hotel Schwielowsee, Germany, 02.11.2014 - 07.11.2014 (2014)

Mainz, R.: . , 2nd KestCells Workshop “Advanced growth processes of thin film PV technologies: PVD/CVD based processes, reactive annealing and chemical based approaches” Berlin, Germany, 24.04.2014 - 24.04.2014 (2014)

Farajian, M.; Hardenacke, V.; Preussner, J.; Pfeiffer, W.; Siegele, D.: Description of the Surface and Subsurface Material Conditions after Applying High Frequency Mechanical Impact (HFMI) Treatment, Shot Peening and Deep Rolling: A Step Towards Surface Engineering in Fatigue Resistant Welds. , In: International Institute of Welding, IIW [Ed.] : Commission XIII Fatigue of welded components and structures : XIII-2532-14. Roissy Ch. De Gaulle Cedex, 2014, p. 1-11

Villa, M.; Pantleon, K.; Somers, M.A.J.: Evolution of compressive strains in retained austenite during sub-zero Celsius martensite formation and tempering. , Acta Materialia 65 (2014), p. 383-392
doi:10.1016/j.actamat.2013.11.007

Kriska, M.; Tacq, J.; Van Acker, K.; Seefeldt, M.: Evolution of residual micro phase and orientation dependent stresses during cold wire drawing. , In: S.J.B Kurz ... [Ed.] : International Conference on Residual Stresses 9 (ICRS 9) : Garmisch-Partenkirchen; Germany; 7 October 2012 through 9 October 2012. Zürich: Trans Tech Publ., 2014 (Materials Science Forum ; 768-769). - ISBN 978-3-03785-849-3, p. 327-334
doi:10.4028/www.scientific.net/MSF.768-769.327

Mainz, Roland; Rodriguez-Alvarez, Humberto: Growth of chalcogenide semiconductor thin films studied by real-time x-ray diffraction. , ECMI Special Interest Group, SUSTAINABLE ENERGY, Nanostructures for Photovoltaics and Energy Storage Technische-Universität Berlin, Germany, 08.12.2014 - 09.12.2014 (2014)

Kromm, A; Steppan, E; Kannengiesser, T: High-Energy Synchrotron Study of the Stress–Strain Behavior of Hydrogen-Charged High Strength Structural Steel. , In: Kannengiesser, Th. ... [Ed.] : In-situ Studies with Photons, Neutrons and Electrons Scattering II. Springer, 2014. - ISBN 978-3-319-06145-0, p. 165-176
doi:10.1007/978-3-319-06145-0_10

Workowski, M.; Nitschke-Pagel, T.; Dilger, K.: Identification of load induced inhomogeneous plastic deformations in aluminium welds by diffraction methods. , In: S.J.B Kurz ... [Ed.] : International Conference on Residual Stresses 9 (ICRS 9) : Garmisch-Partenkirchen; Germany; 7 October 2012 through 9 October 2012. Zürich: Trans Tech Publ., 2014 (Materials Science Forum ; 768-769). - ISBN 978-3-03785-849-3, p. 675-681
doi:10.4028/www.scientific.net/MSF.768-769.675

Ramos-Moore, E.; Espinoza, C.; Coelho, R.S.; Pinto, H.; Brito, P.; Soldera, F.; Mücklich, F.; Garcia, J.: Investigations on Thermal Stresses of a Graded Ti(C,N) Coating Deposited on WC-Co Hardmetal. , Advanced Materials Research 996 (2014), p. 848-854
doi:10.4028/www.scientific.net/AMR.996.848

Stefenelli, M.; Riedl, A.; Todt, J.; Bartosik, M.; Daniel, R.; Mitterer, C.; Keckes, J.: Macroscopic Fracture Behaviour of CrN Hard Coatings Evaluated by X-Ray Diffraction Coupled with Four-Point Bending. , In: S.J.B Kurz ... [Ed.] : International Conference on Residual Stresses 9 (ICRS 9) : Garmisch-Partenkirchen; Germany; 7 October 2012 through 9 October 2012. Zürich: Trans Tech Publ., 2014 (Materials Science Forum ; 768-769). - ISBN 978-3-03785-849-3, p. 272-279
doi:10.4028/www.scientific.net/MSF.768-769.272

Silva, E.P.; Batista, L.F.; Callegari, B.; Ferrinho, V.; Buzolin, R.H.; Coelho, R.S.; Warchomicka, F.; Requena, G.C.; Ramirez, A.J.; Pinto, H.: Microstructure and Residual Stress Formation during Friction-Stir Welding of Semi-Solid ZK60 Magnesium Alloy. , Advanced Materials Research 922 (2014), p. 688-693
doi:10.4028/www.scientific.net/AMR.922.688

Bachmaier, A.; Rathmayr, G.B.; Bartosik, M.; Apel, D.; Zhang, Z.; Pippan, R.: New insights on the formation of supersaturated solid solutions in the Cu-Cr system deformed by high-pressure torsion. , Acta Materialia 69 (2014), p. 301-313
doi:10.1016/j.actamat.2014.02.003

Maawad, E.; Brokmeier, H.-G.; Wagner, L.; Hofmann, M.; Gan, W.M.; Genzel, Ch.; Klaus, M.: Non-destructive residual stress evaluation in mechanically surface treated Ti-2.5Cu by diffraction techniques. , NDT & E INTERNATIONAL 61 (2014), p. 67-70
doi:10.1016/j.ndteint.2013.10.002

Farajian, M.; Hardenacke, V.; Klaus, M.; Schweizer, F.; Pfeiffer, W.; Siegele, D.: Numerical Studies of Shot Peening of High Strength Steels and the related Experimental Investigations by means of Hole Drilling, X-ray and Synchrotron Diffraction Analysis. , In: International Conference on Shot Peening ICSP12 : Goslar, Germany, September 15-18, 2014. , 2014, p. 317-323

Mainz, R.; Singh, A.; Levcenko, S.; Klaus, M.; Genzel, C.; Ryan, K.M.; Unold, T.: Phase-transition-driven growth of compound semiconductor crystals from ordered met-astable nanorods. , Nature Communications 5 (2014), p. 3133
doi:10.1038/ncomms4133

Mainz, R.; Singh, A.; Levcenko, S.; Klaus, M.; Genzel, C.; Ryan, K.; Unold, T.: Phase-transition-driven growth of compound semiconductor crystals from ordered metastable nanorods. , 5th International Workshop on CIGS Solar Cell Technology Berlin, Germany, 02.04.2014 - 03.04.2014 (2014)

Fuß, T.; Meixner, M.; Klaus, M.; Genzel, Ch.: Residual Stress Analysis by Energy-Dispersive Synchrotron Diffraction: Concepts for High Resolution Depth Profiling in Real Space. , Materials Science Forum 768-769 (2014), p. 44-51
doi:10.4028/www.scientific.net/MSF.768-769.44

Genzel, Ch.; Apel, D.; Klaus, M.; Genzel, M.; Balzar, D.: Residual Stress Gradient Analysis by Multiple Diffraction Line Methods. , Materials Science Forum 768-769 (2014), p. 3-18
doi:10.4028/www.scientific.net/MSF.768-769.3

Farajian, M; Pfeiffer, W; Siegele, D; Klaus, M; Wimpory, R; Boin, M: Residual Stresses in Tubular Joints in as welded and deep rolled conditions. , ECRS9 Troyes, France, 07.07.2014 - 10.07.2014 (2014)

Apel, D.; Klaus, M.; Genzel, M.; Genzel, Ch.: Rietveld-based energy-dispersive residual stress evaluation: analysis of complex stress fields σij(z). , Journal of Applied Crystallography 47 (2014), p. 511-526
doi:10.1107/S1600576713034158

Apel, D.; Klaus, M.; Genzel, Ch.: Simultaneous analysis of residual stress and microstructure gradients from energy-dispersive synchrotron diffraction patterns using the RIETVELD-method. , 9th European Conference on Residual Stresses Troyes, France, 07.07.2014 - 10.07.2014 (2014)

Workowski, M.; Nitschke-Pagel, T.; Dilger, K.: Stress measurement at loaded aluminium welds using diffraction methods. , Advanced Materials Research 996 (2014), p. 431-438
doi:10.4028/www.scientific.net/AMR.996.431

Tacq, J.; Kriska, M.; Seefeldt, M.: Synchrotron diffraction study of the cementite phase in cold drawn pearlitic steel wires. , In: S.J.B Kurz ... [Ed.] : International Conference on Residual Stresses 9 (ICRS 9) : Garmisch-Partenkirchen; Germany; 7 October 2012 through 9 October 2012. Zürich: Trans Tech Publ., 2014 (Materials Science Forum ; 768-769). - ISBN 978-3-03785-849-3, p. 380-387
doi:10.4028/www.scientific.net/MSF.768-769.380

Brauser, S.; Kromm, A.; Dabah, E.; Kannengiesser, T.; Rethmeier, M.: Thermal stability of retained austenite in low alloyed TRIP-steel determined by high energy synchrotron radiation. , Materials Science Forum 772 (2014), p. 129-133
doi:10.4028/www.scientific.net/MSF.772.129

Genzel, Christoph: Thin film stress and microstructure analysis by energy-dispersive diffraction. , IUCr 2014 Montreal, 05.08.2014 - 12.08.2014 (2014)

Meixner, Matthias; Klaus, Manuela; Genzel, Christoph: Untersuchung stark inhomogener, tiefenabhängiger Eigenspannungszustände mit der Stress-Scanning Methode. , AWT, Fachausschuss 13 Eigenspannungen Kassel, 28.10.2014 - 29.10.2014 (2014)

2013

Genzel, Christoph: Advanced thin film characterization by X-ray and energy-dispersive synchrotron diffraction. , Materialwissenschaftliches Seminar, IHP Frankfurt/O. Frankfurt/O., 04.03.2013 - 04.03.2013 (2013)

Klaus, Manuela: Analysis of Coating Systems by Means of Diffraction Methods. , European Powder Metallurgy Congress 2013, Special Interest Seminar on Novel Coating Technologies for Machining and Wear Applications Göteborg, 15.09.2013 - 18.09.2013 (2013)

Apel, Daniel; Klaus, Manuela; Genzel, Christoph: Analysis of residual stress gradients from energy-dispersive diffraction patterns using the Rietveld method. , 7th International Conference on Mechanical Stress Evaluation by Neturon and Synchrotron Radiation, MECA SENS 7 Sydney, Australia, 10.09.2013 - 12.09.2013 (2013)

Coelho, R.S.; Klaus, M.; Genzel, C.; Reimers, W.: Analysis of texture depth distribution by energy dispersive diffraction. , 9th International Conference on Residual Stresses Garmisch-Partenkirchen, 07.10.2012 - 09.10.2012 (2013)

Kaufmann, C.A.; Greiner, D.; Rodriguez-Alvarez, H.; Weber, A.; Heinemann, M.D.; Lauche, J.; Klaus, M.; Genzel, C.; Schock, H.W.; Mainz, R.: Co-evaporation of Cu(In,Ga)Se2 at Low Temperatures: an In-Situ X-Ray Growth Analysis. , , (2013), p. 3058-3061
doi:10.1109/PVSC.2013.6745106

Mainz, Roland; Zander, Ole; Weber, Alfons; Klaus, Manuela; Unold, Thomas: Cu2ZnSn(S,Se)4 formation from Cu-Zn-Sn-S precursor films deposited at low-temperatures. , 28th European Photovoltaic Solar Energy Conference (EU PVSEC), Paris, 2013 Paris, 30.09.2013 - 04.10.2013 (2013)

Jegou, S.; Christiansen, T.L.; Klaus, M.; Genzel, Ch.; Somers, M.A.J.: Determination of composition, residual stress and stacking fault depth profiles in expanded austenite with energy-dispersive diffraction. , Thin Solid Films 530 (2013), p. 71-76
doi:10.1016/j.tsf.2012.06.029

Lentz, M.; Klaus, M.; Reimers, W.; Clausen, B.: Effect of high temperature heat treatments on the deformation behavior of Mg-2%Mn-0.7%Ce extrusions investigated by in-situ energy-dispersive synchrotron X-ray diffraction and elasto-plastic self-consistent modeling. , Materials Science and Engineering A 586 (2013), p. 178-189
doi:10.1016/j.msea.2013.08.020

Klaus, Manuela: Einsatz von Röntgen-, Synchrotron- und Neutronenmethoden in der industriellen Materialforschung: Von der Oberfläche bis ins Bauteilvolumen. , International Workshop on Industrial Research Using Synchrotron and Neutron Methods 2013 Helmholtz-Zentrum Berlin , 03.12.2013 - 03.12.2013 (2013)

Rodriguez-Alvarez, H.; Weber, A.; Lauche, J.; Kaufmann, Ch.A.; Rissom, T.; Greiner, D.; Klaus, M.; Unold, Th.; Genzel, C.; Schock, H.-W.; Mainz, R.: Formation of CuInSe2 and CuGaSe2 thin films deposited by three-stage thermal co-evaporation: a real-time x-ray diffraction and fluorescence study. , Advanced Energy Materials 3 (2013), p. 1381-1387
doi:10.1002/aenm.201300339

Mainz, Roland: In-situ analysis of Cu(In,Ga)Se2 growth. , Projekttreffen, Virtual Institute MiCoTFSC Darmstadt, 13.06.2013 - 13.06.2013 (2013)

Genzel, Christoph: Komplementäre Nutzung von Neutronen-, Synchrotron- und Röntgenstrahlen in der Materialwissenschaft. , Hannovermesse Hannover, 10.04.2013 - 10.04.2013 (2013)

Genzel, Christoph: Materialforschung im Lichte weißer, hochenergetischer Synchrotronstrahlung. , Materialwissenschaftliches Seminar der Universität Siegen Siegen, 16.07.2013 - 16.07.2013 (2013)

Jiménez, C.; García-Moreno, F.; Pfretzschner, B.; Kamm, P.H.; Neu, T.R.; Klaus, M.; Genzel, C.; Hilger, A.; Manke, I.; Banhart, J.: Metal foaming studied in situ by energy dispersive X-ray diffraction of synchrotron radiation, X-ray radioscopy and optical expandometry. , Advanced Engineering Materials 15 (2013), p. 141-148
doi:10.1002/adem.201200183

Mogni, L.; Prado, F.; Jiménez, C.; Caneiro, A.: Oxygen order-disorder phase transition in layered GdBaCo2O5+δ perovskite: thermodynamic and transport properties. , Solid State Ionics 240 (2013), p. 19-28
doi:10.1016/j.ssi.2013.03.021

Streeck, Cornelia; Brunken, Stephan; Gerlach, Martin; Herzog, Christian; Kaufmann, Christian A.; Mainz, Roland; Pollakowski, Beatrix; Unterumsberger, Ralf; Weber, Alfons; Beckhoff, Burkhard; Kanngießer, Birgit; Schock, Hans-Werner: Probing the elemental in-depth gradient of Cu(In,Ga)Se2 by means of quantitative grazing incidence X-ray fluorescence analysis. , E-MRS 2013 SPRING MEETING Straßburg, 27.05.2013 - 31.05.2013 (2013)

Klaus, Manuela; Genzel, Christoph: Produktentwicklung im Lichte von Röntgen- und Synchrotronstrahlung. , Technologietransfer-Preis des HZB 2013 Berlin, 17.10.2013 - 17.10.2013 (2013)

Mainz, Roland; Singh, Ajay; Klaus, Manuela; Ryan, Kevin; Unold, Thomas: Real-time analysis of the transition from wurtzite nanorods to kesterite thin films. , 28th European Photovoltaic Solar Energy Conference (EU PVSEC), Paris, 2013 Paris, 30.09.2013 - 04.10.2013 (2013)

Mainz, Roland: Real-time diffraction and fluorescence analysis for the development of thin film fabrica-tion processes. , Workshop on Industrial Research Using Synchrotron and Neutron Methods Berlin, 03.12.2013 - 03.12.2013 (2013)

Mainz, Roland: Real-time EDXRD / XRF. , Introductory week VI MiCoTFSC Berlin, 14.10.2013 - 14.10.2013 (2013)

Mainz, Roland: Real-time growth analysis of thin film semiconductors by in-situ diffraction and fluorescence. , The 28th European Crystallographic Meeting (ECM28) University of Warwick, UK, 25.08.2013 - 29.08.2013 (2013)

Carter, Nathaniel J.; Mainz, Roland; Walker, Bryce; Yang, Wei-Chang; Zander, Ole; Schmidt, Sebastian; Weber, Alfons; Unold, Thomas; Agrawal, Rakesh: Real-time Investigation of the Sintering Mechanism in Cu-Zn-Sn-S Nanocrystal Films for Photovoltaic Applications. , MRS Spring Meeting 2013 San Francisco, CA, USA, 01.04.2013 - 05.04.2013 (2013)

Mainz, R.; Walker, B.C.; Schmidt, S.S.; Zander, O.; Weber, A.; Rodriguez-Alvarez, H.; Just, J.; Klaus, M.; Agrawal, R.; Unold, T.: Real-time observation of Cu2ZnSn(S,Se)4 solar cell absorber layer formation from nanoparticle precursors. , Physical Chemistry Chemical Physics 15 (2013), p. 18281-18289
doi:10.1039/c3cp53373e

Rodriguez-Alvarez, H.; Weber, A.; Mainz, R.; Klaus, M.; Kaufmann, C.A.; Rissom, T.; Genzel, C.; Schock, H.-W.: Real-time observation of the phase transformations and microstructural changes during the incorporation of In into a Cu thin film at 770K. , Journal of Alloys and Compounds 588 (2013), p. 644-647
doi:10.1016/j.jallcom.2013.11.147

Rodriguez-Alvarez, H.; Mainz, R.; Caballero, R.; Abou-Ras, D.; Klaus, M.; Gledhill, S.; Weber, A.; Kaufmann, C.A.; Schock, H.-W.: Real-time study of Ga diffusion processes during the formation of Cu(In,Ga)Se2: The role of Cu and Na content. , Solar Energy Materials and Solar Cells 116 (2013), p. 102-109
doi:10.1016/j.solmat.2013.04.008

Mainz, Roland; Rodriguez-Alvarez, Humberto; Kaufmann, Christian A.; Unold, Thomas; Klaus, Manuela; Genzel, Christoph: Recent developments of EDXRD/XRF for real-time thin film formation studies at BESSY II. , 3rd German-Swedish RÅC workshop on materials science Hamburg, 18.03.2013 - 19.03.2013 (2013)

Rodriguez-Alvarez, H.; Barreau, N.; Kaufmann, C.A.; Weber, A.; Klaus, M.; Painchaud, T.; Schock, H.-W.; Mainz, R.: Recrystallization of Cu(In,Ga)Se2 thin films studied by X-ray diffraction. , Acta Materialia 61 (2013), p. 4347-4353
doi:10.1016/j.actamat.2013.04.006

Farajian, M.; Nitschke-Pagel, T.; Boin, M.; Wimpory, R.C.: Relaxation of Welding Residual Stresses in Tubular Joints under Multiaxial Loading. , The Tenth International Conference on Multiaxial Fatigue & Fracture (ICMFF10) Kyoto (Japan), Suzaku Campus, Ritsumeikan University, 03.06.2013 - 06.06.2013 (2013)

Genzel, C.; Denks, I.A.; Klaus, M.: Residual Stress Analysis by X-Ray Diffraction Methods in Modern Diffraction Methods. , In: Modern Diffracztion Methods. WILEY-VCH, 2013. - ISBN 978-3-527-32279-4, p. 127-153

Polatidis, E.; Frankel, P.; Wei, J.; Klaus, M.; Comstock, R.J.; Ambard, A.; Lyon, S.; Cottis, R.A.; Preuss, M.: Residual stresses and tetragonal phase fraction characterization of corrosion tested Zircaloy-4 using energy dispersive synchrotron X-Ray diffraction. , Journal of Nuclear Materials 432 (2013), p. 102-112
doi:10.1016/j.jnucmat.2012.07.025

Meixner, Matthias; Klaus, Manuela; Genzel, Christoph: Röntgenographische Spannungsanalyse an diamantbeschichteten WC-Co Wendeschneidplatten unter streifenden Beugungsbedingungen. , Tagung der Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik FA Eigenspannungen Nr. 13 Garching, 07.05.2013 - 08.05.2013 (2013)

Mainz, R.; Pistor, P.; Schmidt, S.; Klaer, J.; Klenk, R.: Schlussbericht: “HT-CIGS, Entwicklung von Cu(In,Ga)S2-Dünnschichtsolarmodulen“. , 2013

Rodriguez-Alvarez, H.; Mainz, R.: Schlussbericht: “Verbundprojekt GRACIS: Chemische Gradienten in Cu(In,Ga)(S,Se)2 : Insitu-Diagnostik“. , 2013

Meixner, M.; Klaus, M.; Genzel, Ch.: Sin2ψ-based residual stress gradient analysis by energy-dispersive synchrotron diffraction constrained by small gauge volumes. I. Theoretical concept. , Journal of Applied Crystallography 46 (2013), p. 610 - 618
doi:10.1107/S0021889813008340

Meixner, M.; Klaus, M.; Genzel, Ch.: Sin2ψ-based residual stress gradient analysis by energy-dispersive synchrotron diffraction constrained by small gauge volumes. II. Experimental implementation. , Journal of Applied Crystallography 46 (2013), p. 619 - 627
doi:10.1107/S0021889813008364

Abboud, A.; Send, S.; Pashniak, N.; Leitenberger, W.; Ihle, S.; Huth, M.; Hartmann, R.; Strueder, L.; Pietsch, U.: Sub-pixel resolution of a pnCCD for X-ray white beam applications. , Journal of Instrumentation 8 (2013), p. P05005/1-15
doi:10.1088/1748-0221/8/05/P05005

Wei, J.; Frankel, P.; Polatidis, E.; Blat, M.; Ambard, A.; Comstock, R.J.; Hallstadius, L.; Hudson, D.; Smith, G D.W.; Grovenor, C.R M.; Klaus, M.; Cottis, R.A.; Lyon, S.; Preuss, M.: The effect of Sn on autoclave corrosion performance and corrosion mechanisms in Zr-Sn-Nb alloys. , Acta Materialia 61 (2013), p. 4200-4214
doi:10.1016/j.actamat.2013.03.046

Farajian, M.: Welding residual stress behavior under mechanical loading. , Welding in the World 57 (2013), p. 157-169
doi:10.1007/s40194-013-0024-8

Garcia-Moreno, F.; Jimenez, C.; Kamm, P.H.; Klaus, M.; Wagener, G.; Banhart, J.; Genzel, Ch.: White-beam X-ray radioscopy and tomography with simultaneous diffraction at the EDDI beamline. , Journal of Synchrotron Radiation 20 (2013), p. 809-810
doi:10.1107/S0909049513018670

Rodriguez-Alvarez, Humberto; Barreau, Nicolas; Mainz, Roland; Kaufmann, Christian A.; Weber, Alfons; Klaus, Manuela; Painchaud, Thomas; Schock, Hans-Werner: X-ray diffraction study of the recrystallization of Cu(In,Ga)Se2 thin films. , E-MRS 2013 SPRING MEETING Straßburg, 27.05.2013 - 31.05.2013 (2013)

2012

Genzel, Christoph: Advanced microstructure and residual stress analysis in thin films and coatings by X-ray and energy-dispersive synchrotron diffraction. , Projekttreffen bei Sandvik Stockholm, Schweden, 25.05.2012 - 25.05.2012 (2012)

Apel, Daniel: Analyse von Eigenspannungstiefen-verteilungen und der Mikrostruktur mittels energiedispersiver Synchrotronbeugung unter Verwendung der Rietveld-Methode. , Fachausschuss der AWT13 "Eigenspannungen" Remscheid, 05.06.2012 - 06.06.2012 (2012)

Klaus, Manuela: Eigenspannungs- und Mikrostrukturanalyse an kristallinen Dünnschichtstrukturen mittels Röntgen- und Synchrotronstrahlung. , Deutsche Kristallzüchtungstagung 2012 Freiberg, 07.03.2012 - 09.03.2012 (2012)

Klaus, Manuela; Wimpory, Robert; Genzel, Christoph: Einsatz von Röntgen-, Synchrotron- und Neutronendiffraktion in der industriellen Materialforschung: Von der Oberfläche bis ins Bauteilvolumen. , HZB-Industrietag Berlin, 18.10.2012 - 18.10.2012 (2012)

Mainz, Roland: Energy-dispersive insights into reactive formation of solar energy materials. , BESSY II Beamline Evaluation Berlin, 07.09.2012 - 07.09.2012 (2012)

Genzel, Christoph: Energy-dispersive synchrotron diffraction – a versatile method for advanced materials characterization. , TMS 2012 Orlando, 11.03.2012 - 15.03.2012 (2012)

Genzel, Christoph: Energy-dispersive synchrotron diffraction – a versatile method for advanced materials characterization. , TMS 2012 Orlando, 11.03.2012 - 15.03.2012 (2012)

Brito, P.; Pinto, H.; Genzel, Ch.; Klaus, M.; Kaysser-Pyzalla, A.: Epitaxial stress and texture in thin oxide layers grown on Fe-Al alloys. , Acta Materialia 60 (2012), p. 1230-1237
doi:10.1016/j.actamat.2011.11.033

Kromm, A.: Henry Granjon Prize Competition 2011 Winner Category B: "Materials Behaviour and Weldability" EXPLORING THE INTERACTION OF PHASE TRANSFORMATION AND RESIDUAL STRESS DURING WELDING BY SYNCHROTRON DIFFRACTION. , Welding in the World 56 (2012), p. 2-11
doi:10.1007/BF03321375

Meixner, M.; Klaus, M.; Genzel, C.; Reimers, W.: High spatial resolution sin2psi-based residual stress gradient analysis by energy-dispersive diffraction. , International Conference on Residual Stresses Nr. 9 Garmisch-Partenkirchen, 07.10.2012 - 09.10.2012 (2012)

Zumsande, K.; Krasokha, N.; Huth, S.; Weber, S.; Theisen, W.: In situ investigation of the gas–solid interaction between highalloyed steel powder and nitrogen by energy dispersive diffraction. , Journal of Materials Science 47 (2012), p. 3214-3226
doi:10.1007/s10853-011-6159-3

Mainz, Roland; Rodriguez-Alvarez, Humberto; Lauche, Jakob; Weber, Alfons; Kaufmann, Christian A.; Rissom, Thorsten; Schock, Hans-Werner: In-situ Analyse von CIGS/Se-Wachstumsprozessen. , Projekttreffen, GRACIS-Projekt Stuttgart, 29.11.2012 - 29.11.2012 (2012)

Mainz, Roland; Rodriguez-Alvarez, Humberto; Lauche, Jakob; Weber, Alfons; Kaufmann, Christian A.; Rissom, Thorsten; Schock, Hans-Werner: In-situ Analyse von CIGSe-Wachstumsprozessen. , GRACIS-Projekttreffen Halle, 21.06.2012 - 21.06.2012 (2012)

Götze, Lutz; Schorr, Susan; Milke, Ralf; Dohmen, Ralf; Wirth, Richard: In-situ monitoring of diffusion processes and texture formation in spinel (MgAl2O4) reaction layers by energy dispersive X-ray diffraction (EDXRD). , 4th Joint BER II and BESSY II Users' Meeting Berlin, 12.12.2012 - 14.12.2012 (2012)

Garcés, G.; Onorbe, E.; Pérez, P.; Klaus, M.; Genzel, C.; Adeva, P.: Influence of SiC particles on compressive deformation of magnesium matrix composites. , Materials Science and Engineering A 533 (2012), p. 119-123
doi:10.1016/j.msea.2011.10.103

Roy, S.; Gibmeier, J.; Kostov, V.; Weidenmann, K.A.; Nagel, A.; Wanner, A.: Internal load transfer and damage evolution in a 3D interpenetrating metal/ceramic composite. , Materials Science and Engineering A 551 (2012), p. 272-279
doi:10.1016/j.msea.2012.05.016

Maawad, E.; Sano, Y.; Wagner, L.; Brokmeier, H.-G.; Genzel, Ch.: Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys. , Materials Science and Engineering A 536 (2012), p. 82-91
doi:10.1016/j.msea.2011.12.072

Ferreira-Barragans, S.; Fernandez, R.; Fernandez-Castrillo, P.; Gonzalez-Doncel, G.: Kinetics of tri-axial and spatial residual stress relaxation: Study by synchrotron radiation diffraction in a 2014Al alloy. , Journal of Alloys and Compounds 523 (2012), p. 94-101
doi:10.1016/j.jallcom.2012.01.081

Bartosik, M.; Daniel, R.; Zhang, Z.; Deluca, M.; Ecker, W.; Stefenelli, M.; Klaus, M.; Genzel, C.; Mitterer, C.; Keckes, J.: Lateral gradients of phases, residual stresses and hardness in a laser heated Ti0.52Al0.48N coating on hard metal. , Surface & Coatings Technology 206 (2012), p. 4502-4510
doi:10.1016/j.surfcoat.2012.02.035

Villa, M.; Grumsen, F.B.; Pantleon, K.; Somers, M.A.J.: Martensitic transformation and stress partitioning in a high-carbon steel. , Scripta Materialia 67 (2012), p. 621-624
doi:10.1016/j.scriptamat.2012.06.027

Klaus, Manuela: Neutrons and Synchrotron - Complementary Probes for Engineering. , 32th Neutron School 2012 Helmholtz-Zentrum Berlin, 08.03.2012 - 16.03.2012 (2012)

Meixner, Matthias; Klaus, Manuela; Genzel, Christoph; Reimers, Walter: Ortsaufgelöste Eigenspannungsgradientenanalyse mittels energiedispersiver Synchrotronbeugung unter Verwendung kleiner Volumenelemente. , Tagung der Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik FA Eigenspannungen Nr. 13 Remscheid, 05.06.2012 - 06.06.2012 (2012)

Jimenez, C.; Garcia-Moreno, F.; Rack, A.; Tucoulou, R.; Klaus, M.; Pfretzschner, B.; Rack, T.; Cloetens, P.; Banhart, J.: Partial decomposition of TiH2 studied in situ by energy-dispersive diffraction and ex situ by diffraction microtomography of hard X-ray synchrotron radiation. , Scripta Materialia 66 (2012), p. 757-760
doi:10.1016/j.scriptamat.2012.01.057

Mainz, Roland: Real-time growth analysis by In situ EDXRD/XRF. , Kick-off-Meeting MiCoTFSC Berlin, 26.11.2012 - 26.11.2012 (2012)

Fuß, Tillman; Klaus, Manuela; Genzel, Christoph: Residual stress analysis by energy-dispersive synchrotron diffraction: Concepts for high resolution depth profiling in real space. , ICRS 9 Garmisch-Partenkirchen, 07.10.2012 - 09.10.2012 (2012)

Genzel, Christoph: Residual stress and its analysis by diffraction methods. , International Max Planck Research School for Advanced Materials Stuttgart, 17.09.2012 - 20.09.2012 (2012)

Genzel, Christoph; Apel, Daniel; Klaus, Manuela; Genzel, Martin; Balzar, Davor: Residual stress gradient analysis by ‘multiple diffraction line’ methods. , 9th International Conference on Residual Stresses Garmisch-Partenkirchen, 07.10.2012 - 09.10.2012 (2012)

Schorr, S.; Mainz, R.; Moenig, H.; Lauermann, I.; Bär, M.: The complex material properties of chalcopyrite and kesterite thin-film solar cell absorbers tackled by synchrotron-based analytics. , Progress in Photovoltaics 20 (2012), p. 557-567
doi:10.1002/pip.1256

Klaus, Manuela: Thin film stress analysis by high energy synchrotron diffraction in the energy dispersive mode. , 9th International Conference on Residual Stresses Garmisch-Partenkirchen, 07.10.2012 - 09.10.2012 (2012)

2011

Fuß, T.; Wimpory, R.C.; Klaus, M.; Genzel, Ch.: Bridging gaps in surface zone residual stress analysis using complementary probes for strain depth profiling. , Materials Science Forum 681 (2011), p. 411 - 416
doi:10.4028/www.scientific.net/MSF.681.411

Kromm, A.; Kannengiesser, T.: Characterizing Phase Transformations of different LTT Alloys and their Effect on Residual Stresses and Cold Cracking. , Welding in the World 55 (2011), p. 48-56
doi:10.1007/BF03321286

Jimenez, C.; Garcia-Moreno, F.; Pfretzschner, B.; Klaus, M.; Wollgarten, M.; Zizak, I.; Schumacher, G.; Tovar, M.; Banhart, J.: Decomposition of TiH2 studied in situ by synchrotron X-ray and neutron diffraction. , Acta Materialia 59 (2011), p. 6318-6330
doi:10.1016/j.actamat.2011.06.042

Zhilyaev, A.P.; Sabirov, I.; Gonzalez-Doncel, G.; Molina-Aldareguia, J.; Srinivasarao, B.; Perez-Prado, M.T.: Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions. , Materials Science and Engineering A 528 (2011), p. 3496-3505
doi:10.1016/j.msea.2011.01.062

Genzel, Ch.; Krahmer, S.; Klaus, M.; Denks, I.A.: Energy-Dispersive Diffraction Stress Analysis under Laboratory and Synchrotron Conditions: a Comparative Study. , Journal of Applied Crystallography 44 (2011), p. 1-12
doi:10.1107/S0021889810047898

Rissom, T.; Mainz, R.; Kaufmann, C.A.; Caballero, R.; Efimova, V.; Hoffmann, V.; Schock, H.-W.: Examination of growth kinetics of copper rich Cu(In,Ga)Se-2-films using synchrotron energy dispersive X-ray diffractometry. , Solar Energy Materials and Solar Cells 95 (2011), p. 250-253
doi:10.1016/j.solmat.2010.05.007

Genzel, C.; Denks, I.A.; Coelho, R.; Thomas, D.; Mainz, R.; Apel, D.; Klaus, M.: Exploiting the features of energy-dispersive synchrotron diffraction for advanced residual stress and texture analysis. , Journal of Strain Analysis for Engineering Design 46 (2011), p. 615-625
doi:10.1177/0309324711403824

Weber, A.; Rodriguez-Alvarez, H.; Mainz, R.; Klaer, J.; Klenk, R.; Klaus, M.; Meeder, A.; Neisser, A.; Schock, H.W.: Fast Cu(In,Ga)Se2 formation by processing Cu-In-Ga precursors in selenium atmosphere. , In: 37th IEEE Photovoltaic Specialists Conference (PVSC), 2011 : 19 - 24 June 2011, Seattle, Washington ; conference proceedings. Piscataway, NJ: IEEE, 2011, p. 003315-003320
doi:10.1109/PVSC.2011.6186649

Kromm, A.; Brauser, S.; Kannengiesser, T.; Rethmeier, M.: High-energy synchrotron diffraction study of a transformation induced plasticity steel during tensile deformation. , Journal of Strain Analysis for Engineering Design 46 (2011), p. 581-591
doi:10.1177/0309324711403969

Brito, P.; Pinto, H.; Genzel, C.; Klaus, M.; Kaysser-Pyzalla, A.: Impact of transition oxides on growth stresses and texture of alumina scales formed during oxidation of iron aluminides. , Scripta Materialia 65 (2011), p. 312-315
doi:10.1016/j.scriptamat.2011.04.039

Thomas, D.; Mainz, R.; Rodriguez-Alvarez, H.; Marsen, B.; Abou-Ras, D.; Klaus, M.; Genzel, C.; Schock, H.-W.: In-situ studies of the recrystallization process of CuInS2 thin films by energy dispersive X-ray diffraction. , Thin Solid Films 519 (2011), p. 7193-7196
doi:10.1016/j.tsf.2010.12.229

Zay, K.; Maawad, E.; Brokmeier, H.-G.; Wagner, L.; Genzel, Ch.: Influence of mechanical surface treatments on the high cycle fatigue performance of TIMETAL 54M. , Materials Science and Engineering A 528 (2011), p. 2554 - 2558
doi:10.1016/j.msea.2010.12.064

Merdes, S.; Mainz, R.; Rodriguez-Alvarez, H.; Klaer, J.; Klenk, R.; Meeder, A.; Schock, H.-W.; Lux-Steiner, M.-C.: Influence of precursor stacking on the absorber growth in Cu(In,Ga)S2 based solar cells prepared by a rapid thermal process. , Thin Solid Films 519 (2011), p. 7189-7192
doi:10.1016/j.tsf.2011.01.397

Vogli, E.; Tillmann, W.; Selvadurai-Lassl, U.; Fischer, G.; Herper, J.: Influence of Ti/TiAlN-multilayer designs on their residual stresses and mechanical properties. , Applied Surface Science 257 (2011), p. 8550-8557
doi:10.1016/j.apsusc.2011.05.013

Maawad, E.; Brockmeier, H.G.; Wagner, L.; Sano, Y.; Genzel, Ch.: Investigation on the surface and near-surface characteristics of Ti-2.5Cu after various mechanical surface treatments. , Surface & Coatings Technology 205 (2011), p. 3644 - 3650
doi:10.1016/j.surfcoat.2011.01.001

Meixner, M.; Fitzpatrick, M.E.; Reimers, W.: Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis. , Composites Science and Technology 71 (2011), p. 167-176
doi:10.1016/j.compscitech.2010.11.003

Klaus, M.; Genzel, Ch.: Multilayer systems for cutting tools: On the relationship between coating design, surface processing, and residual stress. , Advanced Engineering Materials 13 (2011), p. 845 - 850
doi:10.1002/adem.201000306

Schorr, S.; Stephan, C.; Mainz, R.; Rodriguez-Alvarez, H.; Tovar, M.: Neutrons and Photons in Materials Research for Thin Film Solar Cells. , Advanced Engineering Materials 13 (2011), p. 737-741
doi:10.1002/adem.201000290

Maawad, E.; Brokmeier, H.-G.; Wagner, L.; Genzel, Ch.; Klaus, M.: Residual Stress Distribution in Alpha and Beta Phases of Mechanically Surface Treated TIMETAL LCB Determined by Energy-Dispersive X-Ray Diffraction. , In: Proceedings of the 11th Int. Conf. on Shot Peening (2011). , 2011, p. 1-6

Farajian, M.; Nitschke-Pagel, T.; Wimpory, R.C.; Hofmann, M.; Klaus, M.: Residual Stress Field Measurements in Welds by Means of X-ray, Synchrotron and Neutron Diffraction. , Materialwissenschaft und Werkstofftechnik 42 (2011), p. 996-1001
doi:10.1002/mawe.201100782

Schöbel, Michael: Residual Stresses and Thermal Fatigue in Metal Matrix Composites: A comparative study of stress measurements by neutron and synchrotron diffraction combined with tomography. , 2011

Kromm, A.; Kannengiesser, T.; Altenkirch, J.; Gibmeier, J.: Residual Stresses in Multilayer Welds with Different Martensitic Transformation Temperatures Analyzed by High-Energy Synchrotron Diffraction. , Materials Science Forum 681 (2011), p. 37-42
doi:10.4028/www.scientific.net/MSF.681.37

Apel, D.; Klaus, M.; Genzel, Ch.; Balzar, D.: Rietveld refinement of energy-dispersive synchrotron measurements. , Zeitschrift für Kristallographie 226 (2011), p. 934 - 943
doi:10.1524/zkri.2011.1436

Farajian, Majid: Stability and Relaxation of Welding Residual Stresses. , 2011

Onorbe, E.; Garcés, G.; Pérz, P.; Cabezas, S.; Klaus, M.; Genzel, C.; Frutos, E.; Adeva, P.: The evolution of internal strain in Mg-Y-Zn alloys with a long period stacking ordered structure. , Scripta Materialia 65 (2011), p. 719 - 722
doi:10.1016/j.scriptamat.2011.07.017

Bar, R.; Dabah, E.; Eliezer, D.; Kannengiesser, Th.; Boellinghaus, Th.: The Influence of Hydrogen on Thermal Desorption Processes in Structural Materials. , Procedia Engineering 10 (2011), p. 3668-3676
doi:10.1016/j.proeng.2011.04.604

Kromm, Arne: Umwandlungsverhalten und Eigenspannungen beim Schweißen neuartiger LTT-Zusatzwerkstoffe. , 2011

2010

Rodriguez-Alvarez, H.; Mainz, R.; Marsen, B.; Weber, A.; Schock, H. W.: Copper Sulfide Assisted Recrystallization of Cu-Poor CuInS2 Observed 'In-Situ' by Polychromatic X-ray Diffraction. , In: Akira Yamada ... [Ed.] : Thin-film compound semiconductor photovoltaics - 2009 : Symposium held April 13 - 17, 2009, San Francisco, California, U.S.A.. Warrendale, Pa. : MRS, 2010 (Materials Research Society symposium proceedings : 1165). - ISBN 978-1-60511-138-4, p. 53-59

Huppmann, M.; Reimers, W.: Development of Twin Fractions and Microstresses of the Hot Extruded Magnesium Alloy AZ31 under Cyclic Loading Conditions. , In: Chandra, T. [Ed.] : THERMEC 2009, 6th International Conference on Processing & Manufacturing of Advanced Materials; Berlin, Germany, August 25 - 29, 2009 ; part 4. Stafa-Zuerich [u.a.]: Trans Tech Publ. , 2010 (Materials Science Forum ; 638-642), p. 2411-2416
doi:10.4028/www.scientific.net/MSF.638-642.2411

Juricic, C.; Pinto, H.; Cardinali, D.; Klaus, M.; Genzel, Ch.; Pyzalla, A.R.: Effect of Substrate Grain Size on the Growth, Texture and Internal Stresses of Iron Oxide Scales Forming at 450 °C. , Oxidation of Metals 73 (2010), p. 15 - 41
doi:10.1007/s11085-009-9162-1

Juricic, C.; Pinto, H.; Cardinali, D.; Klaus, M.; Genzel, Ch.; Pyzalla, A.R.: Evolution of Microstructure and Internal Stresses in Multi-Phase Oxide Scales Grown on (110) Surfaces of Iron Single Crystals at 650 °C. , Oxidation of Metals 73 (2010), p. 115 - 138
doi:10.1007/s11085-009-9166-x

Kannengiesser, Thomas; Kromm, Arne; Gibmeier, Jens; Rethmeier, Michael: In-situ Analyse der Phasenumwandlungskinetik während des Schweißens. , Materials Testing 52 (2010), p. 204-210
doi:10.3139/120.110122

Kromm, A.; Kannengiesser, T.; Gibmeier, J.: In-Situ Observation of Phase Transformations during Welding of low Transformation Temperature Filler Material. , Materials Science Forum 638-642 (2010), p. 3769-3774
doi:10.4028/www.scientific.net/MSF.638-642.3769

Brauser, S.; Kromm, A.; Kannengiesser, T.; Rethmeier, M.: In-situ synchrotron diffraction and digital image correlation technique for characterizations of retained austenite stability in low-alloyed transformation induced plasticity steel. , Scripta Materialia 63 (2010), p. 1149-1152
doi:10.1016/j.scriptamat.2010.08.007

Brito, P.; Pinto, H.; Klaus, M.; Genzel, C.; Pyzalla, A.: Internal Stresses and Texture of Nano-Structured Alumina Scales Growing on Fe3Al Polycrystals. , Advances in X-Ray Analysis 53 (2010), p. 81-88

Brito, P.; Pinto, H.; Klaus, M.; Genzel, C.; Kaysser-Pyzalla, A.: Internal stresses and textures of nanostructured alumina scales growing on polycrystalline Fe3Al alloy. , Powder Diffraction 25 (2010), p. 114-118
doi:10.1154/1.3402764

Huppmann, Michael; Stark, Sebastian; Reimers, Walter: Microstructural development of the hot extruded magnesium alloy AZ31 under cyclic testing conditions. , International Journal of Materials Research 101 (2010), p. 1441-1449
doi:10.3139/146.110378

Paiva Brito, Pedro: Phase Development, Texture and Internal Stress Evolution during the Oxidation of Iron Aluminides. , 2010

Rodriguez-Alvarez, H.; Mainz, R.; Marsen, B.; Abou-Ras, D.; Schock, H.-W.: Recrystallization of Cu-In-S thin films studied in situ by energy-dispersive X-ray diffraction. , Journal of Applied Crystallography 43 (2010), p. 1053-1061
doi:10.1107/S0021889810025860

Rodriguez-Alvarez, H.; Mainz, R.; Marsen, B.; Schock, H.-W.: Recrystallization of Cu-poor CuInS2 assisted by metallic Cu or Ag. , Journal of Solid State Chemistry 183 (2010), p. 803-806
doi:10.1016/j.jssc.2010.01.023

Kirchlechner, C.; Martinschitz, K.J.; Daniel, R.; Klaus, M.; Genzel, C.; Mitterer, C.; Keckes, J.: Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction. , Thin Solid Films 518 (2010), p. 2090 - 2096
doi:10.1016/j.tsf.2009.08.011

Maawad, E.; Brokmeier, H. -G.; Hofmann, M.; Genzel, Ch.; Wagner, L.: Stress distribution in mechanically surface treated Ti-2.5Cu determined by combining energy-dispersive synchrotron and neutron diffraction. , Materials Science and Engineering A 527 (2010), p. 5745-5749
doi:10.1016/j.msea.2010.05.044

Multigner, M.; Ferreira-Barragans, S.; Frutos, E.; Jaafar, M.; Ibanez, J.; Marin, P.; Perez-Prado, M.T.; Gonzalez-Doncel, G.; Asenjo, A.; Gonzalez-Carrasco, J.L.: Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties. , Surface & Coatings Technology 205 (2010), p. 1830-1837
doi:10.1016/j.surfcoat.2010.07.126

Coelho, R.S.; Klaus, M.; Genzel, Ch.: Through-thickness texture profiling by energy dispersive synchrotron diffraction. , Journal of Applied Crystallography 43 (2010), p. 1322 - 1328
doi:10.1107/S0021889810037210

Banhart, J.; Borbely, A.; Dzieciol, K.; Garcia-Moreno, F.; Manke, I.; Kardjilov, N.; Kaysser-Pyzalla, A.R.; Strobl, M.; Treimer, W.: X-ray and neutron imaging - Complementary techniques for materials science and engineering. , International Journal of Materials Research 101 (2010), p. 1069-1079
doi:10.3139/146.110382

Kirchlechner, C.; Martinschitz, K.J.; Daniel, R.; Mitterer, C.; Donges, J.; Rothkirch, A.; Klaus, M.; Genzel, C.; Keckes, J.: X-Ray diffraction analysis of three-dimentional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel. , Scripta Materialia 62 (2010), p. 774 - 777
doi:10.1016/j.scriptamat.2010.02.006

2009

Kromm, A.; Kannengiesser, T.; Gibmeier, J.; Genzel, Ch.; van der Mee, V.: Determination of Residual Stresses in Low Transformation Temperature (LTT -) Weld Metals Using X-Ray and High Energy Synchrotron Radiation. , Welding in the World 53 (2009), p. 3-16
doi:10.1007/BF03266687

Uhlmann, E.; Byrne, F.; Reimers, W.; Klaus, M.: Drehen von AlSi-Legierungen mit CVD-diamantbeschichteten Werkzeugen. , In: Forschung in Bewegung : 9. Magdeburger Maschinenbau-Tage ; 30.09. - 01.10.2009 ; Tagungsband. Univ. , Magdeburg, 2009, p. [1-13]

Kannengiesser, T.; Kromm, A.: Formation of welding residual stresses in low transformation temperature (LTT) materials. , Revista Soldagem & Inspeção 14 (2009), p. 74-81
doi:10.1590/S0104-92242009000100009

Rodriguez-Alvarez, H.; Kötschau, I.M.; Genzel, C.; Schock, H.-W.: Growth paths for the sulfurization of Cu-rich Cu/In thin films. , Thin Solid Films 517 (2009), p. 2140-2144
doi:10.1016/j.tsf.2008.10.091

Kromm, A.; Kannengiesser, T.: In-situ-phase analysis using synchrotron radiation of low transformation temperature (LTT) welding material. , Revista Soldagem & Inspeção 14 (2009), p. 82-88
doi:10.1590/S0104-92242009000100010

Multigner, M.; Fernandez-Castrillo, P.; Ferreira-Barragans, S.; Gonzalez-Doncel, G.; Gonzalez-Carrasco, J.L.: Influencia del arenado de la aleacion Ti6Al4V en la dureza subsuperficial y estado de tensiones residuales = Influence of sandblasting of Ti6Al4V alloy on the subsurface hardness and residual stresses state. , Revista de Metalurgia 45 (2009), p. 52-57
doi:10.3989/revmetalm.0803

Maawad, E.; Brokmeier, H.-G.; Wagner, L.; Genzel, C.: Investigation of Near-Surface Stress Gradients in Shot Peened Ti-2.5Cu Measured by Mechanical and Diffraction Methods. , In: H. El-Hofy [Ed.] : Proceedings of the 9th International Conference on Production Engineering, Design and Control : Alexandria, Egypt, 10-12 February 2009 . , 2009, p. 1-9

Feyerherm, R.; Dudzik, E.; Wolter, A.U.B.; Valencia, S.; Prokhnenko, O.; Maljuk, A.; Landsgesell, S.; Aliouane, N.; Bouchenoire, L.; Brown, S.; Argyriou, D.N.: Magnetic-field induced effects on the electric polarization in RMnO3(R=Dy,Gd). , Physical Review B 79 (2009), p. 134426/1-8
doi:10.1103/PhysRevB.79.134426

Radu, F.; Mishra, S.K.; Zizak, I.; Erko, A.I.; Dürr, H.A.; Eberhardt, W.; Nowak, G.; Buschhorn, S.; Zabel, H.; Zhernenkov, K.; Wolff, M.; Schmitz, D.; Schierle, E.; Dudzik, E.; Feyerherm, R.: Origin of the reduced exchange bias in an epitaxial FeNi(111)/CoO(111) bilayer. , Physical Review B 79 (2009), p. 184425/1-8
doi:10.1103/PhysRevB.79.184425

7T-MPW-EDDI