“VEKMAG” at BESSY II creates 3D magnetic fields in samples
A general view of the VEKMAG end-station. The vector magnet chamber (grey) is supported by a hexapod frame. Below the magnet one can distinguish the detector chamber (green) and in the forward direction the deposition chamber (dark grey) is displayed. The beam quality is monitored by a diagnostic chamber (yellow) positioned in front of the magnet chamber. © Dr. Tino Noll
Together with HZB, teams from the Universität Regensburg, from the Freie Universität Berlin and from the Ruhr Universität Bochum have jointly set up a unique measurement station at BESSY II: a vector electromagnet consisting of three mutually perpendicular Helmholtz coils which enables setting the local magnetic field at the sample position to any orientation desired. The first measurements of magnetic materials, spin systems, and nanostructured magnetic samples are scheduled for early 2015.
“We have been working on this project for almost six years”, reports HZB physicist Dr. Florin Radu. He is coordinating the project with the three universities. The deposition chamber for the samples was designed at Freie Universität Berlin. Ruhr Universität Bochum built the detector chambers, and Universität Regensburg developed the concepts for synchrotron beam-based ferromagnetic resonance experiments.
Rapid change of polarisation
In the meantime, Radu and his team ensured optimum characteristics of a new beamline for carrying out most sophisticated experiments: “We need an extremely stable beam, but we also want to be able to change the polarisation of the x-rays very rapidly”, he explains. “For that reason, we developed a hexapod vacuum chamber with six moveable legs supporting a mirror. By changing the leg positions slightly, we can change the orientation of the first mirror and thereby the polarisation of the x-ray beam in just seconds – about one hundred times faster than before.” The tests show that this prototype arrangement improves the signal-to-noise ratio by a factor of more than ten.
Temperature between 1,6 K and 500 K
The new experimental station will not only facilitate many different kinds of studies, particularly in the soft X-ray region, but will also permit to carry out completely new studies that require temperatures of 500 Kelvin right down to 1.6 Kelvin and magnetic fields as high as nine tesla. Simultaneously the X-rays can penetrate the individual atoms and excite their outer electrons, enabling magnetic properties of the individual elements to be distinguished.
The main assets of the new VEKMAG end-station are experimental specifications that are unique in comparison with stations operating at other international facilities. In particular for element-specific and time-resolved measurements of ferromagnetic and paramagnetic resonances, as well as for spectroscopic and scattering experiments VEKMAG offers a unique sample environment. However, “VEKMAG will only attain its full potential, once HZB has implemented a new innovative beam filling pattern with variable pulse lengths at full photon intensities”, according to Radu, because “we can then investigate rapid spin dynamics with sub-picosecond time resolutions.”
The VEKMAG project was funded by the German Federal Ministry for Education and Research (BMBF) through a grant of about four million Euros.
- A simpler way to inorganic perovskite solar cellsInorganic perovskite solar cells made of CsPbI3 are stable over the long term and achieve good efficiencies. A team led by Prof. Antonio Abate has now analysed surfaces and interfaces of CsPbI3 films, produced under different conditions, at BESSY II. The results show that annealing in ambient air does not have an adverse effect on the optoelectronic properties of the semiconductor film, but actually results in fewer defects. This could further simplify the mass production of inorganic perovskite solar cells.
- Spintronics: A new path to room temperature swirling spin texturesA team at HZB has investigated a new, simple method at BESSY II that can be used to create stable radial magnetic vortices in magnetic thin films.
- BESSY II: How pulsed charging enhances the service time of batteriesAn improved charging protocol might help lithium-ion batteries to last much longer. Charging with a high-frequency pulsed current reduces ageing effects, an international team demonstrated. The study was led by Philipp Adelhelm (HZB and Humboldt University) in collaboration with teams from the Technical University of Berlin and Aalborg University in Denmark. Experiments at the X-ray source BESSY II were particularly revealing.