Understanding a new type of solar cell
Scanning electron microscopy of a Perovskite-solar cell: on a glass substrate (glass and FTO) highly porous titanium dioxide is deposited, which is impregnated with perovskite. This film is covered by an organic hole transporting material (HTM) and gold contact. © EPFL
Perovskite based solar cells are a hot topic in energy research and Science Magazine has put it on the list of Breakthroughs in 2013. In only a few years their efficiency has increased from 3 % to more than 16 %. However, a detailed explanation of the mechanisms of operation within this photovoltaic system is still lacking. Scientists from Ecole polytechnique fédérale in Lausanne (EPFL) and of HZB-Institute for Solar Fuels have now uncovered the mechanism by which these novel light-absorbing semiconductors transfer electrons along their surface. They examined perovskite based solar cells with different architectures with time resolved spectroscopy techniques. Their results, which are now published online in Nature photonics, open the way to the design of photovoltaic converters with improved efficiency.
The groups of Michael Gratzel and Jaques E. Moser at EPFL, working with the team of Roel van de Krol at HZB-Institute for Solar Fuels, have used time-resolved spectroscopy techniques to determine how charges move across perovskite surfaces.
The researchers worked on various cell architectures, using either semiconducting titanium dioxide or insulating aluminum trioxide films. Both porous films were impregnated with lead iodide perovskite (CH3NH3PbI3) and an organic “hole-transporting material”, which helps extracting positive charges following light absorption. The time-resolved techniques included ultrafast laser spectroscopy and microwave photoconductivity.
The results showed two main dynamics. First, that charge separation, the flow of electrical charges after sunlight reaches the perovskite light-absorber, takes place through electron transfer at both junctions with titanium dioxide and the hole-transporting material on a sub-picosecond timescale. “Secondly, we could measure by microwave photoconductivity that charge recombination was significantly slower for titanium oxide films rather than aluminum ones”, Dennis Friedrich from the van de Krol Team points out. Charge recombination is a detrimental process wasting the converted energy into heat and thus reducing the overall efficiency of the solar cell”.
The authors state that lead halide perovskites constitute unique semiconductor materials in solar cells, allowing ultrafast transfer of electrons and positive charges at two junctions simultaneously and transporting both types of charge carriers quite efficiently. In addition, their findings show a clear advantage of the architecture based on titanium dioxide films and hole-transporting materials.
More information:
Nature photonics 'Unraveling the mechanism of photoinduced charge transfer processes in lead iodide perovskite solar cells'
doi:10.1038/nphoton.2013.374
- Green fabrication of hybrid materials as highly sensitive X-ray detectorsNew bismuth-based organic-inorganic hybrid materials show exceptional sensitivity and long-term stability as X-ray detectors, significantly more sensitive than commercial X-ray detectors. In addition, these materials can be produced without solvents by ball milling, a mechanochemical synthesis process that is environmentally friendly and scalable. More sensitive detectors would allow for a reduction in the radiation exposure during X-ray examinations.
- Electrical energy storage: BAM, HZB, and HU Berlin plan joint Berlin Battery LabThe Federal Institute for Materials Research and Testing (BAM), the Helmholtz-Zentrum Berlin (HZB), and Humboldt University of Berlin (HU Berlin) have signed a memorandum of understanding (MoU) to establish the Berlin Battery Lab. The lab will pool the expertise of the three institutions to advance the development of sustainable battery technologies. The joint research infrastructure will also be open to industry for pioneering projects in this field.
- Battery research: visualisation of aging processes operandoLithium button cells with electrodes made of nickel-manganese-cobalt oxides (NMC) are very powerful. Unfortunately, their capacity decreases over time. Now, for the first time, a team has used a non-destructive method to observe how the elemental composition of the individual layers in a button cell changes during charging cycles. The study, now published in the journal Small, involved teams from the Physikalisch-Technische Bundesanstalt (PTB), the University of Münster, researchers from the SyncLab research group at HZB and the BLiX laboratory at the Technical University of Berlin. Measurements were carried out in the BLiX laboratory and at the BESSY II synchrotron radiation source.