HZB Sets New World Record for CIGS Perovskite Tandem Solar Cells

© G. Farias Basulto / HZB

The tandem cell consists of a combination of CIGS and perovskite and achieves a certified record efficiency of 24.6%.

The tandem cell consists of a combination of CIGS and perovskite and achieves a certified record efficiency of 24.6%. © G. Farias Basulto / HZB

The main components are clearly visible under the scanning electron microscope: granular CIGS crystals on the contact layer, followed by an intermediate layer of aluminium-doped zinc oxide, above which is the extremely thin perovskite layer (black). This is followed by an indium-doped zinc oxide layer and an anti-reflective coating.

The main components are clearly visible under the scanning electron microscope: granular CIGS crystals on the contact layer, followed by an intermediate layer of aluminium-doped zinc oxide, above which is the extremely thin perovskite layer (black). This is followed by an indium-doped zinc oxide layer and an anti-reflective coating. © HZB

Combining two semiconductor thin films into a tandem solar cell can achieve high efficiencies with a minimal environmental footprint. Teams from HZB and Humboldt University Berlin have now presented a CIGS-perovskite tandem cell that sets a new world record with an efficiency of 24.6%, certified by the independent Fraunhofer Institute for Solar Energy Systems.

Thin-film solar cells require little energy and material to produce and therefore have a very small environmental footprint. In addition to the well-known and market-leading silicon solar cells, there are also thin-film solar cells, e.g. based on copper, indium, gallium and selenium, known as CIGS cells. CIGS thin films can even be applied to flexible substrates.

Now, experts from HZB and Humboldt University Berlin, have developed a new tandem solar cell that combines a bottom cell made of CIGS with a top cell based on perovskite. By improving the contact layers between the top and bottom cells, they were able to increase the efficiency to 24.6 %. This is the current world record, as certified by the Fraunhofer Institute for Solar Energy Systems ISE in Freiburg, Germany.

As always, this record cell was the result of a successful team effort: the top cell was fabricated by TU Berlin master's student Thede Mehlhop under the supervision of Stefan Gall. The perovskite absorber layer was produced in the joint laboratory of HZB and Humboldt University of Berlin. The CIGS sub-cell and contact layers were fabricated by HZB researcher Guillermo Farias Basulto. He also used the high-performance cluster system KOALA, which enables the deposition of perovskites and contact layers in vacuum at HZB.

‘At HZB, we have highly specialised laboratories and experts who are top performers in their fields. With this world record tandem cell, they have once again shown how fruitfully they work together,' says Prof. Rutger Schlatmann, spokesman for the Solar Energy Department at HZB.

The record announced today is not the first world record at HZB: HZB teams have already achieved world record values for tandem solar cells several times, most recently for silicon-perovskite tandem solar cells, but also with the combination CIGS-perovskite.

We are confident that CIGS-perovskite tandem cells can achieve much higher efficiencies, probably more than 30%," says Prof. Rutger Schlatmann.

arö

  • Copy link

You might also be interested in

  • Nanosilver as an electrocatalyst for CO₂ reduction
    Science Highlight
    24.09.2026
    Nanosilver as an electrocatalyst for CO₂ reduction
    Via electrolysis, CO2 can be reduced to CO, a raw material for further chemical products such as fuels. Within the GreenQuest Project, an internation team led by HZB chemist Prashanth Menezes has now systematically investigated catalyst layers made of silver nanoparticles, varying both the size of the particles and their density. The best yield was achieved with nanoparticles with diameters of around 10 nm, which were loosely distributed. Furthermore, they demonstrated how the economic efficiency of the electrochemical cell can be enhanced by integrating an additional chemical reaction at the anode, enabling the simultaneous production of a valuable formic acid, hydrogen, and CO in one device.
  • Spin waves inside a nano-oscillator imaged for the first time
    Science Highlight
    23.09.2026
    Spin waves inside a nano-oscillator imaged for the first time
    For the first time, researchers have directly imaged the magnetisation dynamics inside a spin Hall nano-oscillator — a nanoscale device that converts direct current into tunable microwave signals and is a promising building block for energy-efficient wireless communication and brain-inspired computing. A Swedish–German team led by the University of Gothenburg and Helmholtz-Zentrum Berlin (HZB) achieved this using time-resolved scanning transmission X-ray microscopy at the MAXYMUS instrument at BESSY II. The results, now published in Advanced Materials, reveal spin-wave features that had escaped previous, indirect measurement techniques.
  • Marcel Risch has been appointed Professor at the Freie Universität Berlin
    News
    17.09.2026
    Marcel Risch has been appointed Professor at the Freie Universität Berlin
    Marcel Risch was appointed to a W2-S professorship in the Department of Physics at Freie Universität Berlin in August 2026. His research group has been transformed into the department 'Mechanisms of Sustainable Electrocatalysis'. Risch investigates the fundamental mechanisms of electrocatalytic reactions and, on this basis, develops knowledge- and data-driven strategies to improve electrocatalysts for the sustainable production of hydrogen, fuels and chemicals.