Perovskite solar cells: Hydrogen bonds measured

Orbital hybridization between organic and inorganic components of MAPI perovskite in ground-state geometry.

Orbital hybridization between organic and inorganic components of MAPI perovskite in ground-state geometry. © HZB

The evaluation of X-ray measurements on methylammonium perovskite semiconductors now shows what role hydrogen bonds play in these materials. In addition, the HZB team showed that radiation damage by soft X-rays to this sensitive class of materials occurs even faster than often expected. Both results provide important information for perovskites materials research for solar cells.

Metal halide perovskite (MHP) solar cells are being rapidly and intensively developed in labs around the world. This class of materials is inexpensive, easy to process, and has achieved efficiencies of over 20 percent after only a few years of development. By varying the chemical composition, the optoelectronic properties can be precisely matched to the sunlight and to the particular application. The highest efficiencies are achieved by hybrid perovskites containing methylammonium cations (MA), but the presence of MA is also associated with instability.

Signature of hydrogen bonds unveiled

Now, an international collaboration including the HZB’s Department Interface Design, led by Marcus Bär, has used soft x-ray emission spectroscopy (XES) combined with advanced theoretical modelling to gain new insights into the electronic structure and, in particular, the hydrogen bonds within methylammonium-lead-iodide perovskite films. The samples came from the laboratory of perovskite pioneer Henry Snaith, Oxford University, and the measurements were performed during (pre-pandemic) beamtime at the Advanced Light Source at Lawrence Berkeley National Laboratory. They have now published the results of the study which draws on modelling of the electronic structure and the ultrafast movement of hydrogen atoms within the structure by Swedish collaborator Michael Odelius, Stockholm University.

"By combining site- and element-specific soft X-ray spectroscopic measurements with molecular dynamics and density functional theory modelling, we have now been able to provide new insights into the electronic structure and dynamics of the organic MHP component," says Regan Wilks, HZB physicist and first author of the study. In particular, the group succeeded in detecting spectral signatures of the hydrogen bonds between the organic methylammonium molecule and the inorganic framework of the perovskite, and saw evidence for significant dynamic changes in the structure induced during the measurement on the femtosecond time scale.  

Speedy damage

To separate these ultrafast signals from the effects of damage by the high intensity synchrotron x-ray beam, the group also thoroughly characterized these damage effects, showing that they can occur on the time scale of 100 ms, much faster than the duration of a standard experiment. The speed of this damage effect means that it can in effect be “invisible” unless the experiment is conducted with great care – by the time the measurement begins to yield results, the damage is already done. "It’s important to document these effects in a publication, even if it is not the most scientifically interesting result, because it can be very important information to other groups who might want to perform similar experiments or confirm our results," Wilks points out. To avoid the radiation damage and thus artefacts during the measurement, the sample under the soft X-ray beam was moved perpendicular to the photon beam during the measurement keeping the irradiation of any point to a fraction of a second.

arö

  • Copy link

You might also be interested in

  • Shedding light on insulators: how light pulses unfreeze electrons
    Science Highlight
    08.09.2025
    Shedding light on insulators: how light pulses unfreeze electrons
    Metal oxides are abundant in nature and central to technologies such as photocatalysis and photovoltaics. Yet, many suffer from poor electrical conduction, caused by strong repulsion between electrons in neighboring metal atoms. Researchers at HZB and partner institutions have shown that light pulses can temporarily weaken these repulsive forces, lowering the energy required for electrons mobility, inducing a metal-like behavior. This discovery offers a new way to manipulate material properties with light, with high potential to more efficient light-based devices.
  • Lithium-sulphur batteries with lean electrolyte: problem areas clarified
    Science Highlight
    12.08.2025
    Lithium-sulphur batteries with lean electrolyte: problem areas clarified
    Using a non-destructive method, a team at HZB investigated practical lithium-sulphur pouch cells with lean electrolyte for the first time. With operando neutron tomography, they could visualise in real-time how the liquid electrolyte distributes and wets the electrodes across multilayers during charging and discharging. These findings offer valuable insights into the cell failure mechanisms and are helpful to design compact Li-S batteries with a high energy density in formats relevant to industrial applications.
  • Self assembling monolayer can improve lead-free perovskite solar cells too
    Science Highlight
    04.08.2025
    Self assembling monolayer can improve lead-free perovskite solar cells too
    Tin perovskite solar cells are not only non-toxic, but also potentially more stable than lead-containing perovskite solar cells. However, they are also significantly less efficient. Now, an international team has succeeded in reducing losses in the lower contact layer of tin perovskite solar cells: The scienstists identified chemical compounds that self-assemble into a molecular layer that fits very well with the lattice structure of tin perovskites. On this monolayer, tin perovskite with excellent optoelectronic quality can be grown, which increases the performance of the solar cell.