Record-breaking tandem solar cell now with precise scientific explanations

Photo of the perovskite/silicon tandem solar cell. The active area in the middle of the wafer is enclosed by the silver electrode.

Photo of the perovskite/silicon tandem solar cell. The active area in the middle of the wafer is enclosed by the silver electrode. © Johannes Beckedahl/ Lea Zimmermann / HZB

The world's best tandem solar cells, consisting of a silicon bottom cell and a perovskite top cell, can today convert around one-third of incident solar radiation into electrical energy. These are record values, especially for a potentially very low-cost technology. A team at HZB is now providing the scientific data for the first time and describing how this development was achieved in the renowned journal Science. 

“This achievement was possible because we at HZB have built up expertise in both silicon heterojunction technology and perovskite solar cells and work very closely together,” says Prof. Dr. Steve Albrecht. He leads a research group on perovskite tandem solar cells at HZB Berlin. For example, the perovskite experts from the HySPRINT Innovation Lab and the silicon experts from the PV Competence Centre (PVcomB) have already set several efficiency world records for tandem solar cells.

The tandem solar cell, now described in detail for the first time in the journal Science, also made headlines in December 2022. It set a new world record for efficiency, converting 32.5% of incident sunlight into electrical energy. This world record stood until mid-April 2023, when it was broken by a group from the PV Lab at the KAUST research centre in Saudi Arabia. The research field is extremely competitive, with many groups worldwide working in this area. Now the HZB team has again been the first to present a solid and scientifically rigorous peer-reviewed technical publication. Publishing precise data sets from the measurements as well as detailed information on the structure of the tandem cell.

World record efficiency with perovskite tandem solar cells

Albrecht and his team relied primarily on a significantly improved perovskite compound and a sophisticated surface modification using a novel piperazinium iodide molecule. It was developed by postdoctoral researchers Dr Silvia Mariotti and Dr Eike Köhnen. This largely suppressed charge recombination and significantly reduced the associated losses. Using special measurement techniques, the researchers were able to analyse the fundamental processes at the interfaces and in the individual layers of the tandem cell in detail. Then the were able to further optimise them based on a deeper understanding. The developments were then combined and transferred to tandem solar cells, with further adjustments to the top electrode for improved optics.

Many experts from different institutes were involved in the production and development of the tandem cells. For example, a group from the University of Potsdam carried out advanced optoelectronic measurements of the single and tandem cells. The novel molecules for modifying the surface were synthesised at the Joxe Mari Korta Centre in San Sebastian, Spain. A team from Kaunas Technical University in Lithuania helped processing the new perovskite compounds with very high film quality. Only by combining all the modifications was it possible to achieve maximum values for photovoltage (open circuit voltage) and photocurrent, and thus efficiency.

Impressive development in recent years

Over the past few years, various research institutes and photovoltaic companies around the world have been continuously improving the efficiency of solar cells. The last two years in particular have been very exciting. Teams from the HZB achieved a record value of just under 30% (29.8%) for tandem solar cells made of silicon and perovskite at the end of 2021. This was achieved by introducing special periodic nanostructures into the solar cells. In the summer of 2022, the Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland reported a certified tandem cell with 31.3% efficiency. From December 2022 to mid-April 2023, the world record was back at HZB with 32.5%, until the KAUST Photovoltaics Laboratory in Saudi Arabia demonstrated a perovskite silicon tandem cell with 33.2% in the laboratory. KAUST even managed to increase this to 33.7% in May 2023.  Albrecht says: “We are very excited about these tremendous advances in our scientific discipline. They give us hope that this technology can make an important contribution to a sustainable energy supply in the fight against climate change in the coming years, because the upscaling and industrial production of perovskite/silicon tandem solar cells is also feasible”.

HZB’s scientific director, Prof. Bernd Rech, says: “The solar cell efficiency of silicon/perovskite tandem cells is now in the range previously only achieved by expensive III/V semiconductors.” The technologies for manufacturing such tandem solar cells are already available in principle and potentially low cost. The focus now is on further improvements in the area of stability in outdoor use.

arö

  • Copy link

You might also be interested in

  • Green hydrogen with PEC electrolysers: New insights into transport processes
    Science Highlight
    21.07.2026
    Green hydrogen with PEC electrolysers: New insights into transport processes
    One method of storing solar energy is to use PEC electrolysers to produce hydrogen. However, scaling up this technology remains challenging. Now, a team at the HZB Institute for Solar Fuels has used 2D fluorescence imaging and particle velocimetry to observe the movement of ions and dissolved gases within the electrolyte during electrolysis. These new insights may prove useful in the development of larger PEC electrolysers.
  • New contact material boosts the efficiency of perovskite solar cells
    Science Highlight
    16.07.2026
    New contact material boosts the efficiency of perovskite solar cells
    A newly developed material for the electron contact improves the efficiency of single perovskite solar cells and perovskite/silicon tandem solar cells. The new material is based on a carborane molecule. It offers several advantages over the standard material C60, as shown by the study led by Steve Albrecht’s team. The new material has since been patented and is already commercially available.
  • BESSY II: New sample environment allows glimpse into thermocatalytic processes
    Science Highlight
    15.07.2026
    BESSY II: New sample environment allows glimpse into thermocatalytic processes
    A novel measurement cell allows, for the first time, soft and hard X-ray investigations under high pressures of up to 20 bar and temperatures of up to 400°C. This provides new insights into thermocatalytic processes, such as the Fischer-Tropsch synthesis for producing synthetic fuels. The development of the measurement cell is considered a significant achievement within the Care-O-Sene project.