Towards the Climate Neutral City: Independent consulting office for integrating photovoltaics into buildings
New solutions are available to integrate PV into the building skin. One beautiful example is the Copenhagen International School. © Philippe Vollichard/EPFL/Kromatix by Swissinso
Dr. Björn Rau und Dr. Markus Sauerborn from the consulting office. © Silvia Zerbe/HZB
The Helmholtz-Zentrum Berlin is opening a national consulting office for integrating photovoltaics into buildings (BAIP) this spring. The consulting office will support building owners, architects, and municipal planners in activating building envelopes for power generation. The project is being funded by the Helmholtz Association over a period of four years as part of its knowledge transfer programme.
In order to achieve the climate targets, the building stock must be designed to be almost climate-neutral by 2050. That's ambitious, but feasible. In future, buildings must actively contribute to energy supply and energy storage. However, roof areas for conventional solar modules are only available to a limited extent, especially in cities, while other building surfaces have hardly been utilised to generate electricity to date. Power generation by means of building-integrated-photovoltaics can blend in with the design and construction of the building skin and roof area. It is decentralised and generates electricity where it is consumed. This technique will need to be widely applied in the coming years.
Independent service agency
“From our discussions with involved actors in the construction sector, we know that many architecture firms find it difficult to provide the necessary specialist knowledge”, explains Dr. Björn Rau, Deputy Director of the HZB PVcomB Institute and responsible for the project. So far, there has been no independent service agency that prepares, evaluates, and classifies current information in order to offer independent consultancy to architects, planners, building owners, investors, and urban developers. Product and financial independence are essential for acceptance of the service and also represent a unique feature. ”Until now, consulting services have only been provided by manufacturers and distributors of solar modules. They do not guarantee completeness and an entire overview”, says Dr. Markus Sauerborn, who is responsible for knowledge transfer at the HZB.
HZB-Expertise in Photovoltaics
"The HZB has been a leader in photovoltaic research for many years. With the BAIP consultancy service, we are also fulfilling a mission, namely to makes sure the knowledge gained from research contributes to society for its tangible benefit”, says Prof. Dr. Bernd Rech, Scientific Director of the HZB.
Competent and strong partners
As a project partner, the HZB has been able to involve important representatives from the fields of construction, planning, and sustainability, including the Federal Chamber of German Architects, the Berlin Chamber of Architects (Architektenkammer Berlin), the German Sustainable Building Council (DGNB), the Reiner Lemoine Institute, the HTW Berlin University of Applied Sciences as well as the Alliance for building-integrated photovoltaics (Alliance BIPV). These partners not only have a great deal of expertise, they also reach the relevant target groups.
Dialogue and training
The consulting office will be set up on the HZB Adlershof campus in the immediate vicinity of PV research and technology companies. However, consultations can also take place at client sites. The service office will promote dialogue between researchers, manufacturers, architects, and end customers. In addition to direct consultancy, the service office will also offer advanced training and workshops designed in close consultation with project partners to meet the needs of participants.
- Long-term stability for perovskite solar cells: a big step forwardPerovskite solar cells are inexpensive to produce and generate a high amount of electric power per surface area. However, they are not yet stable enough, losing efficiency more rapidly than the silicon market standard. Now, an international team led by Prof. Dr. Antonio Abate has dramatically increased their stability by applying a novel coating to the interface between the surface of the perovskite and the top contact layer. This has even boosted efficiency to almost 27%, which represents the state-of-the-art. After 1,200 hours of continuous operation under standard illumination, no decrease in efficiency was observed. The study involved research teams from China, Italy, Switzerland and Germany and has been published in Nature Photonics.
- Electrocatalysis with dual functionality – an overviewHybrid electrocatalysts can produce green hydrogen, for example, and valuable organic compounds simultaneously. This promises economically viable applications. However, the complex catalytic reactions involved in producing organic compounds are not yet fully understood. Modern X-ray methods at synchrotron sources such as BESSY II, enable catalyst materials and the reactions occurring on their surfaces to be analysed in real time, in situ and under real operating conditions. This provides insights that can be used for targeted optimisation. A team has now published an overview of the current state of knowledge in Nature Reviews Chemistry.
- Successful master's degree in IR thermography on solar facadesWe are delighted to congratulate our student employee Luca Raschke on successfully completing her Master's degree in Renewable Energies at the Hochschule für Technik und Wirtschaft Berlin - and with distinction!