14 parameters in one go: New instrument for optoelectronics
The bright spheres symbolise bound charge carriers (negative and positive) in the material. The light beam separates these charges, which are then deflected in different ways in the applied magnetic field. With the CLIMAT method, around 14 different parameters of the transport properties in semiconductors can be measured with a single measurement, for example density, lifetime, diffusion lengths and mobility. © Laura Canil
An HZB physicist has developed a new method for the comprehensive characterisation of semiconductors in a single measurement. The "Constant Light-Induced Magneto-Transport (CLIMAT)" is based on the Hall effect and allows to record 14 different parameters of transport properties of negative and positive charge carriers. The method was tested now on twelve different semiconductor materials and will save valuable time in assessing new materials for optoelectronic applications such as solar cells.
Solar cells, transistors, detectors, sensors and LEDs have all one thing in common: they are made of semiconductor materials whose charge carriers are only released when they are hit by light (photons). The photons knock electrons (negative charge carriers) out of their orbits, which move through the material until they are captured again after a certain time. Simultaneously, holes are created in the places where the electrons are missing - these holes behave like positively charged charge carriers and are also important for the performance of the respective application. The behaviour of negative and positive charge carriers in semiconductors often differs by orders of magnitude in terms of mobility, diffusion lengths and lifetime. Until now, the parameters of the transport properties had to be determined separately for each type of charge, using different measurement methods.
Single measurement
As part of his "Maria Skłodowska Curie Postdoctoral Fellowship", HZB physicist Dr Artem Musiienko has now developed a new method that can record all 14 parameters of positive and negative charge carriers in a single measurement. The "Constant Light-Induced Magneto-Transport (CLIMAT)" uses a magnetic field vertically through the sample and a constant light source for charge separation. The charge carriers move along an electric field and are deflected by the magnetic field perpendicular to their direction of movement (Hall effect), according to their mass, mobility and other properties. A total of 14 different properties can be determined from the signals and, in particular, the differences between the signals of the different charge carriers, Musiienko showed with a neat little system of equations.
p and n charge carriers
"CLIMAT thus provides a comprehensive insight into the complicated mechanisms of charge transport, both positive and negative charge carriers, with a single measurement. This enables us to evaluate new types of semiconductor materials much more quickly, for example for their suitability as solar cells or for other applications," says Musiienko.
Testing different semiconductor materials
To demonstrate the broad applicability of the new method, research teams at HZB, the University of Potsdam and other institutions in the USA, Switzerland, the UK and Ukraine have now used it to characterise a total of twelve very different semiconductor materials, including silicon, halide perovskite films, organic semiconductors such as Y6, semi-insulators, self-assembled monolayers and nanoparticles. The results have now been published in Nature Communications.
Outlook: a very compact instrument
Independent experts such as Prof Vitaly Podzorov from Rutgers University, USA, awarded the CLIMAT method 15 out of 16 points in Nature Electronics and consider the new method to be groundbreaking. In particular, CLIMAT eliminates many of the steps previously required for different measurements thus saving valuable time. In early 2024, the CLIMAT method was approved for patenting by the European Patent Office under the number EP23173681.0. "Negotiations are currently underway with companies about licensing our method," says Musiienko. The goal is a compact measuring device, about the size of a notebook.
- Bright prospects for tin perovskite solar cellsPerovskite solar cells are widely regarded as the next generation photovoltaic technology. However, they are not yet stable enough in the long term for widespread commercial use. One reason for this is migrating ions, which cause degradation of the semiconducting material over time. A team from HZB and the University of Potsdam has now investigated the ion density in four different, widely used perovskite compounds and discovered significant differences. Tin perovskite semiconductors produced with an alternative solvent had a particular low ion density — only one tenth that of lead perovskite semiconductors. This suggests that tin-based perovskites could be used to make solar cells that are not only really environmentally friendly but also very stable.
- Synchrotron radiation sources: toolboxes for quantum technologiesSynchrotron radiation sources generate highly brilliant light pulses, ranging from infrared to hard X-rays, which can be used to gain deep insights into complex materials. An international team has now published an overview on synchrotron methods for the further development of quantum materials and technologies in the journal Advanced Functional Materials: Using concrete examples, they show how these unique tools can help to unlock the potential of quantum technologies such as quantum computing, overcome production barriers and pave the way for future breakthroughs.
- Joint Kyiv Energy and Climate Lab goes liveHelmholtz-Zentrum Berlin and the National University of Kyiv-Mohyla Academy established on 27 November a Joint Energy and Climate Lab.