BESSY II: Magnetic ‘microflowers’ enhance magnetic fields locally

The magnetic microstructure of the nickel-iron alloy leads to a compression of the field lines in the centre.

The magnetic microstructure of the nickel-iron alloy leads to a compression of the field lines in the centre. © A. Palau/ICMAB

Two magnetic contrast maps. The cobalt rod is located in the centre of the microflower.

Two magnetic contrast maps. The cobalt rod is located in the centre of the microflower. © S. Valencia /HZB

A flower-shaped structure only a few micrometres in size made of a nickel-iron alloy can concentrate and locally enhance magnetic fields. The size of the effect can be controlled by varying the geometry and number of 'petals'. This magnetic metamaterial developed by Dr Anna Palau's group at the Institut de Ciencia de Materials de Barcelona (ICMAB) in collaboration with her partners of the CHIST-ERA MetaMagIC project, has now been studied at BESSY II in collaboration with Dr Sergio Valencia. Such a device can be used to increase the sensitivity of magnetic sensors, to reduce the energy required for creating local magnetic fields, but also, at the PEEM experimental station, to study samples under much higher magnetic fields than currently possible.

 

Dr Anna Palau from the Institut de Ciencia de Materials de Barcelona (ICMAB) has developed a special metamaterial that looks like tiny flowers under the scanning electron microscope. The 'petals' consist of strips of a ferromagnetic nickel-iron alloy. The microflowers can be produced in various geometries, not only with different inner and outer radii, but also with variable numbers and widths of petals. This flower-shaped geometry causes the field lines of an external magnetic field to concentrate in the centre of the device, resulting on a greatly intensified magnetic field.

Magnetic metamaterials

'Metamaterials are artificially produced materials with microstructures whose dimensions are smaller than the electromagnetic or thermal waves they are designed to manipulate,' explains Anna Palau. The physicist is working on magnetic microstructures that can be used in data storage, information processing, biomedicine, catalysis and magnetic sensor technology. By using these metamaterials, the sensitivity of magnetic sensors could be highly increased, as the magnetic field to be detected would be amplified at the center of these systems.

Mapping magnetic domains at BESSY II

Anna Palau, her student Aleix Barrera, and Sergio Valencia have now investigated this at the XPEEM experimental station at BESSY II. They placed a cobalt rod in the centre of various microflowers as a sensor for the magnetic field and mapped the magnetic domains inside the cobalt rod. 'By adjusting the geometric parameters such as shape, size and number of petals, the magnetic behaviour can be switched and controlled,' says Valencia. As a result, the sensitivity of a magnetoresistive sensor could be increased by more than two orders of magnitude.

New options, also for experiments at XPEEM

This innovation opens up new technological options for improving the performance of small magnetic sensors and for developing multifunctional magnetic components. In the future, such microstructures could be used to generate much higher magnetic fields locally, which is also of interest for the experimental XPEEM station at BESSY II. 'Our experimental system is a photoemission electron microscope, so magnetic fields deflect the electrons and make the experiments difficult,' says Valencia. 'The maximum magnetic field we can normally apply for imaging is about 25 millitesla (mT). With the magnetic field concentrator, where the field is only locally enhanced, we can easily achieve fields five times higher.' This is very exciting because it opens up the possibility of studying a range of magnetic systems under conditions that have not been possible before.

arö

  • Copy link

You might also be interested in

  • Green fabrication of hybrid materials as highly sensitive X-ray detectors
    Science Highlight
    08.05.2025
    Green fabrication of hybrid materials as highly sensitive X-ray detectors
    New bismuth-based organic-inorganic hybrid materials show exceptional sensitivity and long-term stability as X-ray detectors, significantly more sensitive than commercial X-ray detectors. In addition, these materials can be produced without solvents by ball milling, a mechanochemical synthesis process that is environmentally friendly and scalable. More sensitive detectors would allow for a reduction in the radiation exposure during X-ray examinations.
  • Electrical energy storage: BAM, HZB, and HU Berlin plan joint Berlin Battery Lab
    News
    07.05.2025
    Electrical energy storage: BAM, HZB, and HU Berlin plan joint Berlin Battery Lab
    The Federal Institute for Materials Research and Testing (BAM), the Helmholtz-Zentrum Berlin (HZB), and Humboldt University of Berlin (HU Berlin) have signed a memorandum of understanding (MoU) to establish the Berlin Battery Lab. The lab will pool the expertise of the three institutions to advance the development of sustainable battery technologies. The joint research infrastructure will also be open to industry for pioneering projects in this field.
  • BESSY II: Insight into ultrafast spin processes with femtoslicing
    Science Highlight
    05.05.2025
    BESSY II: Insight into ultrafast spin processes with femtoslicing
    An international team has succeeded at BESSY II for the first time to elucidate how ultrafast spin-polarised current pulses can be characterised by measuring the ultrafast demagnetisation in a magnetic layer system within the first hundreds of femtoseconds. The findings are useful for the development of spintronic devices that enable faster and more energy-efficient information processing and storage. The collaboration involved teams from the University of Strasbourg, HZB, Uppsala University and several other universities.