Perovskite triple-junction solar cells: Even more efficient with GO/SAM bilayers
The triple-junction solar cell combines three different perovskite semiconductors with a novel bilayer of graphene oxide (GO) and a self-assembled monolayer (SAM) as the hole conductor. This bilayer significantly increases both efficiency and long-term stability. The efficiency of the novel perovskite triple-junction solar cell is 27.3% and shows hardly any decline even after more than 770 hours of operation. © Laura Canil /HZB
Perovskite semiconductors efficiently convert sunlight into electrical energy; they are also inexpensive and extremely lightweight. A team at HZB has developed a triple-junction solar cell comprising different perovskite semiconductors, with a novel bilayer of graphene oxide (GO) and a self-assembled monolayer (SAM) as the hole conductor. This bilayer significantly increases both efficiency and long-term stability. The efficiency of the novel perovskite triple-junction solar cell is 27.3% and shows hardly any decline even after more than 770 hours of operation. The study has been published in the renowned journal Joule.
Perovskite-based photovoltaic cells can achieve high power conversion efficiencies (PCEs). Combining two or more different perovskite semiconductors with different band gaps in a multi-junction solar cell allows the solar spectrum to be harnessed even more effectively, thereby increasing efficiency. All-perovskite multi-junction solar cells potentially offer very low manufacturing costs, low weight, and the option of mounting them on flexible substrates.
A complex "Big Mac"
The HZB team used three different perovskite absorbers with different band gaps. Stacking these on top of one another creates a highly complex monolithic perovskite triple-junction solar cell. The main focus of the work was on the interlayer between the middle and rear perovskite subcells. ‘You can imagine it like a Big Mac, where the three buns are separated by different fillings like meat, salad or cheese. Here, that would be the filling between the middle and bottom buns,’ explains Prof. Dr Steve Albrecht, head of the Department of Perovskite Tandem Solar Cells at HZB. The rear absorber layer consists of a tin-lead-based perovskite semiconductor with a low bandgap. The interaction between this perovskite layer and the hole transport layer is considered the most important factor in improving efficiency and stability. Usually, the polymer PEDOT:PSS is used as the hole transport layer; however, this results in losses due to absorption processes, and the PCE degrades quickly.
Focus on the hole conducting layers
‘We then systematically investigated the influence of various hole-conducting layers on the properties of tin-lead perovskites, and thus also on the novel triple-junction solar cells,’ says Dr Philipp Tockhorn, group leader at HZB. ‘We had already established self-assembled monolayers (SAMs) as hole-conducting contact layers in lead-based perovskite solar cells with great success, so it made sense to use these in tin-lead perovskites and triple-junctions as well,’ says Kevin Prince, co-first author of the study and a postdoc at HZB. SAMs consist of large organic molecules that arrange themselves spontaneously into a monolayer. However, SAMs alone do not work very well in these tin-lead perovskites, as the transport of hole charges is inefficient. ‘We therefore experimented with additional layers beneath the SAM layer to act as a kind of substrate,’ explains Yeonghun Yun, co-first author and postdoc in the team. Eventually, they discovered that a layer of graphene oxide (GO) beneath the SAM layer improves the interface both morphologically and electronically, thereby enabling more efficient charge transport.
Efficiency and stability improved
The team incorporated the GO/SAM bilayer into a perovskite triple-junction solar cell in place of a conventional PEDOT:PSS layer. This significantly reduced optical losses. ‘We achieved an efficiency of 27.3% with the triple-junction solar cells, which is one of the highest values for this technology,’ says Albrecht. Furthermore, triple-junction solar cells with GO/SAM also proved their worth in continuous operation, retaining over 90% of their original efficiency even after 770 hours, setting a new stability record for this solar cell architecture. 'Our analyses suggest that, with improvements to the quality of the individual perovskite layers and interlayer films, the efficiency of this architecture could be increased to over 30%,' says Albrecht.
- Does African Architecture exist?The world’s first Pan-African Architecture Biennale took place this September in Nairobi, Kenya. People from the worlds of architecture, art, academia and politics from 54 African countries and the diaspora had travelled to Nairobi to exchange ideas on traditional and contemporary building methods, materials, experiences and projects. Samira Aden co-organised this biennial as lead curator. We spoke to her about it.
- Nanosilver as an electrocatalyst for CO₂ reductionVia electrolysis, CO2 can be reduced to CO, a raw material for further chemical products such as fuels. Within the GreenQuest Project, an internation team led by HZB chemist Prashanth Menezes has now systematically investigated catalyst layers made of silver nanoparticles, varying both the size of the particles and their density. The best yield was achieved with nanoparticles with diameters of around 10 nm, which were loosely distributed. Furthermore, they demonstrated how the economic efficiency of the electrochemical cell can be enhanced by integrating an additional chemical reaction at the anode, enabling the simultaneous production of a valuable formic acid, hydrogen, and CO in one device.
- Spin waves inside a nano-oscillator imaged for the first timeFor the first time, researchers have directly imaged the magnetisation dynamics inside a spin Hall nano-oscillator — a nanoscale device that converts direct current into tunable microwave signals and is a promising building block for energy-efficient wireless communication and brain-inspired computing. A Swedish–German team led by the University of Gothenburg and Helmholtz-Zentrum Berlin (HZB) achieved this using time-resolved scanning transmission X-ray microscopy at the MAXYMUS instrument at BESSY II. The results, now published in Advanced Materials, reveal spin-wave features that had escaped previous, indirect measurement techniques.