Publications 2018


Abburi Venkata, K.; Truman, C.; Wimpory, R.; Pirling, T.: Numerical simulation of a three-pass TIG welding using finite element method with validation from measurements. International Journal of Pressure Vessels and Piping 164 (2018), p. 68-79
doi:10.1016/j.ijpvp.2017.05.014


Abou-Ras, D.; Bär, M.; Caballero, R.; Gunder, R.; Hages, C.; Heinemann, M.D.; Kaufmann, C.A.; Krause, M.; Levcenco, S.; Mainz, R.; Márquez, J.; Nikolaeva, A.; Redinger, A.; Schäfer, N.; Schorr, S.; Stange, H.; Unold, T.; Wilks, R.G.: Advanced characterization and in-situ growth monitoring of Cu(In,Ga)Se2 thin films and solar cells. Solar Energy 170 (2018), p. 102-112
doi:10.1016/j.solener.2018.04.032
Open Access Version


Ahn, J.; He, E.; Chen, L.; Wimpory, R.C.; Kabra, S.; Dear, J. P.; Davies, C. M.: FEM prediction of welding residual stresses in fibre laser-welded AA 2024-T3 and comparison with experimental measurement. The International Journal of Advanced Manufacturing Technology 95 (2018), p. 4243-4263
doi:10.1007/s00170-017-1548-7


Alvares Ferreira, E.; Yokaichiya, F.; Marumo, J.; Vicente, R.; Garcia-Moreno, F.; Kamm, P.; Klaus, M.; Russina, M.; Günther, G.; Jimenez, C.; Franco, M.: Influence of the irradiation in cement for the Brazilian radioactive waste repositories: Characterization via X-ray diffraction, X-ray tomography and quasielastic neutron scattering. Physica B 551 (2018), p. 256-261
doi:10.1016/j.physb.2018.01.018


Apel, D.; Meixner, M.; Liehr, .; Klaus, M.; Degener, S.; Wagener, G.; Franz, C.; Zinn, W.; Genzel, C.; Scholtes, B.: Residual stress analysis of energy-dispersive diffraction data using a two-detector setup: Part I - Theoretical concept. Nuclear Instruments & Methods in Physics Research A 877 (2018), p. 24-33
doi:10.1016/j.nima.2017.09.005


Apel, D.; Meixner, M.; Liehr, A.; Klaus, M.; Degener, S.; Wagener, G.; Franz, C.; Zinn, W.; Genzel, C.; Scholtes, B.: Residual stress analysis of energy-dispersive diffraction data using a two-detector setup: Part II - Experimental implementation. Nuclear Instruments & Methods in Physics Research A 877 (2018), p. 56-64
doi:10.1016/j.nima.2017.09.006


Garces, G.; Mathis, K.; Medina, J.; Horvath, K.; Drozdenko, D.; Onorbe, E.; Dobron, P.; Perez, P.; Klaus, M.; Adeva, P.: Combination of in-situ diffraction experiments and acoustic emission testing to understand the compression behavior of Mg-Y-Zn alloys containing LPSO phase under different loading conditions. International Journal of Plasticity 106 (2018), p. 107-128
doi:10.1016/j.ijplas.2018.03.004


Huang, Q.; Liu, J.; Zhang, L.; Xu, S.; Chen, L.; Wang, P.; Ivey, D.; Wei, W.: Tailoring alternating heteroepitaxial nanostructures in Na-ion layered oxide cathodes via an in-situ composition modulation route. Nano Energy 44 (2018), p. 336-344
doi:10.1016/j.nanoen.2017.12.014


Jimenez, C.; Paeplow, M.; Kamm, P.; Neu, T.; Klaus, M.; Wagener, G.; Banhart, J.; Genzel, C.; Garci­a-Moreno, F.: Simultaneous X-ray radioscopy/tomography and energy-dispersive diffraction applied to liquid aluminium alloy foams. Journal of Synchrotron Radiation 25 (2018), p. 1790-1796
doi:10.1107/S1600577518011657


Levcenko, S.; Hages, C.J.; Hadke, S.H.; Stange, H.; Mainz, R.; Wong, L.H.; Agrawal, R.; Unold, T.: Modulation spectroscopy characterization of Cu based chalcopyrites and kesterites. In: 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC). IEEE, 2018. - ISBN 978-1-5386-8529-7, p. 1918-1921
doi:10.1109/PVSC.2018.8547753


Liu, H.; Zhang, X.; He, X.; Senyshyn, A.; Wilken, A.; Zhou, D.; Fromm, O.; Niehoff, P.; Yan, B.; Li, J.; Muehlbauer, M.; Wang, J.; Schumaher, G.; Paillard, E.; Winter, M.; Li, J.: Truncated Octahedral High-Voltage Spinel LiNi0.5Mn1.5O4 Cathode Materials for Lithium Ion Batteries: Positive Influences of Ni/Mn Disordering and Oxygen Vacancies. Journal of The Electrochemical Society 165 (2018), p. A1886-A1896
doi:10.1149/2.1241809jes


Liu, L.; Ning, D.; Zheng, L.; Zhang, Q.; Gu, L.; Gao, R.; Zhang, J.; Franz, A.; Schumacher, G.; Liu, X.: Improving the electrochemical performances of Li-rich Li1.20Ni0.13Co0.13Mn0.54O2 through a cooperative doping of Na+ and PO43+ with Na3PO4. Journal of Power Sources 375 (2018), p. 1-10
doi:10.1016/j.jpowsour.2017.11.042
Open Access Version


Liu, X.; Wimpory, R.C.; Gong, H.; Liu, Y.; Chen, D.; Liu, Y.; Wu, Y.; Li, C.: The Determination of Residual Stress in Quenched and Cold-Compressed 7050 Aluminum Alloy T-Section Forgings by the Contour Method and Neutron Diffraction. Journal of Materials Engineering and Performance 27 (2018), p. 6049–6057
doi:10.1007/s11665-018-3676-0


Luo, Y.; Jiang, W.; Chen, D.; Wimpory, R.C.; Li, M.; Liu, X.: The repaired weld residual stress in tube to tube-sheet joint by neutron diffraction measurement and finite element method. Journal of Pressure Vessel Technology 140 (2018), p. 021404/1-8
doi:10.1115/1.4039069


Mainz, R.; Stange, H.; Kaufmann, C.A.: Defect Annihilation by Preferential Grain Growth during Cu(In, Ga)Se2 Co-evaporation. In: 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) : (a joint conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC) : 10-15 June 2018. Piscataway, NJ: IEEE, 2018. - ISBN 978-1-5386-8529-7, p. 3875-3879
doi:10.1109/PVSC.2018.8547783
Open Access Version


Marciszko, M.; Baczmanski, A.; Klaus, M.; Genzel, C.; Oponowicz, A.; Wronski, S.; Wróbel, M.; Braham, C.; Sidhom, H.; Wawszczak, R.: A multireflection and multiwavelength residual stress determination method using energy dispersive diffraction. Journal of Applied Crystallography 51 (2018), p. 732-745
doi:10.1107/S1600576718004193
Open Access Version


Meixner, M.; Klaus, M.; Zinn, W.; Apel, D.; Liehr, A.; Genzel, C.; Scholtes, B.: Analysis of Multiaxial Near-Surface Residual Stress Fields by Energy- and Angle-Dispersive X-ray Diffraction: Semi- Versus Nondestructive Techniques. Materials Performance and Characterization 7 (2018), p. 465-487
doi:10.1520/MPC20170135


Mishurova, T.; Cabeza, S.; Thiede, T.; Nadammal, N.; Kromm, A.; Klaus, M.; Genzel, C.; Haberland, C.; Bruno, G.: The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts. Metallurgical and Materials Transactions A 49 (2018), p. 3038-3046
doi:10.1007/s11661-018-4653-9


Raventós, M.; Lehmann, E.; Boin, M.; Morgano, M.; Hovind, J.; Harti, R.; Valsecchi, J.; Kaestner, A.; Carminati, C.; Boillat, P.; Trtik, P.; Schmid, F.; Siegwart, M.; Mannes, D.; Strobl, M.; Grünzweig, C.: A Monte Carlo approach for scattering correction towards quantitative neutron imaging of polycrystals. Journal of Applied Crystallography 51 (2018), p. 386-394
doi:10.1107/S1600576718001607
Open Access Version


Risthaus, T.; Zhou, D.; Cao, X.; He, X.; Qiu, B.; Wang, J.; Zhang, L.; Liu, Z.; Paillard, E.; Schumacher, G.; Winter, M.; Li, J.: A high-capacity P2 Na_{2/3}Ni_{1/3}Mn_{2/3}O_2 cathode material for sodium ion batteries with oxygen activity. Journal of Power Sources 395 (2018), p. 16-24
doi:10.1016/j.jpowsour.2018.05.026


Robinson, J.; Wimpory, R.; Tanner, D.; Mooney, B.; Truman, C.; Panzner, T.: Cold compression of 7075 and factors influencing stress relief. Materials Performance and Characterization 7 (2018), p. 898-911
doi:10.1520/MPC20170130


Smith, M.C.; Smith, A. C.; Ohms, C.; Wimpory, R.C.: The NeT Task Group 4 residual stress measurement and analysis round robin on a three-pass slot-welded plate specimen. International Journal of Pressure Vessels and Piping 164 (2018), p. 3-21
doi:10.1016/j.ijpvp.2017.09.003
Open Access Version


Sonntag, N.; Cabeza, S.; Kuntner, M.; Mishurova, T.; Klaus, M.; Kling e Silva, L.; Skrotzki, B.; Genzel, C.; Bruno, G.: Visualisation of deformation gradients in structural steel by macroscopic magnetic domain distribution imaging (Bitter technique). Strain 54 (2018), p. e12296/1-15
doi:10.1111/str.12296


Stange, Anna Helena: Analyse der Mikrostrukturentwicklung von CuInSe2 mittels in-situ Röntgenbeugung. , 2018
Technische Unsiversität Berlin
https://depositonce.tu-berlin.de//handle/11303/8114
Open Access Version


Stegemann, R.; Cabeza, S.; Pelkner, M.; Lyamkin, V.; Pittner, A.; Werner, D.; Wimpory, R.; Boin, M.; Kreutzbruck, M.; Bruno, G.: Influence of the Microstructure on Magnetic Stray Fields of Low-Carbon Steel Welds. Journal of Neutron Research 37 (2018), p. 66/1-18
doi:10.1007/s10921-018-0522-0


Stephan-Scherb, C.; Nützmann, K.; Kranzmann, A.; Klaus, M.; Genzel, C.: Real time observation of high temperature oxidation and sulfidation of Fe-Cr model alloys. Materials and Corrosion = Werkstoffe und Korrosion 69 (2018), p. 678-689
doi:10.1002/maco.201709892


Sun, F.; Dong, K.; Osenberg, M.; Hilger, A.; Risse, S.; Lu, Y.; Kamm, P.H.; Klaus, E.; Markötter, H.; Garcia-Moreno, F.; Arlt, T.; Manke, I.: Visualizing the morphological and compositional evolution of the interface of InLi-anode|thio-LISION electrolyte in an all-solid-state Li–S cell by in operando synchrotron X-ray tomography and energy dispersive diffraction. Journal of Materials Chemistry A 6 (2018), p. 22489-22496
doi:10.1039/c8ta08821g
Open Access Version


Sun, F.; Osenberg, M.; Dong, K.; Zhou, D.; Hilger, A.; Jafta, C.J.; Risse, S.; Lu, Y.; Markötter, H.; Manke, I.: Correlating Morphological Evolution of Li Electrodes with Degrading Electrochemical Performance of Li/LiCoO2 and Li/S Battery Systems: Investigated by Synchrotron X-ray Phase Contrast Tomography. ACS Energy Letters 3 (2018), p. 356-365
doi:10.1021/acsenergylett.7b01254


Unglaub, J.; Hensel, J.; Wimpory, R.; Nitschke-Pagel, T.; Dilger, K.; Thiele, K.: Analysis of Residual Stress State in Deep-Rolled HT-Bolts. In: Seefeldt, Marc [Ed.] : European Conference on Residual Stresses 2018 : ECRS-10 . MRS, 2018 (Materials Research Proceedings, 6). - ISBN 978-1-945291-89-0, p. 209-214
doi:10.21741/9781945291890-33
Open Access Version


Wimpory, R.; Hofmann, M.; Akrivos, V.; Smith, M.; Pirling, T.; Ohms, C.: Precise measurement of steep residual strain gradients using neutron diffraction in strongly absorbing materials with chemical compositional gradients. Materials Performance and Characterization 7 (2018), p. 488-503
doi:10.1520/MPC20170114


Wimpory, R.C.; Hofmann, M.: Use of Symmetry for Residual Stress Determination. In: Seefeldt, Marc [Ed.] : European Conference on Residual Stresses 2018 : ECRS-10 . MRS, 2018 (Materials Research Proceedings, 6). - ISBN 978-1-945291-89-0, p. 9-14
doi:10.21741/9781945291890-2
Open Access Version


Wimpory, R.C.; Martins, R.V.; Hofmann, M.; Rebelo Kornmeier, J.; Moturu, S.; Ohms, C.: A complete reassessment of standard residual stress uncertainty analyses using neutron diffraction emphasizing the influence of grain size. International Journal of Pressure Vessels and Piping 164 (2018), p. 80-92
doi:10.1016/j.ijpvp.2017.09.002