RIXS endstation for molecular systems
The liquid flexRIXS endstation is dedicated to resonant inelastic x-ray scattering experiments on liquid samples and gasses in the soft x-ray range. The liquids are injected into the chamber via a liquid jet system whereas gasses and also small amounts of liquids can be investigated using a liquid/gas flow cell. The MCP-based RIXS spectrometer allows for a resolving power of better than 1000.
|Temperature range||Room temperature|
|Detector||MCP stack + phosphor screen + CCD|
|Manipulators||Standard (CF 100)|
|Sample holder compatibility|
|Samples||Liquids and gasses|
|Sample environment||Liquid jet in vacuum, three differential pumping stages towards the beam line, gas and liquid flow cell can be mounted instead of jet|
|Resolving power||Better than 1000|
MethodsTime-resolved studies, NEXAFS, RIXS
Endstation for time-resolved and steady-state RIXS measurements on liquid and solid samples and for complementary use at FELs and at BESSYII. The RIXS spectrometer of the end station is a modified GRAZE IV (XES 350) with three gratings. These cover the range between 50 and 900 eV. The resolution amounts to approximately 40 meV at 50 eV and 0.7 eV at 900 eV. Liquid samples are prepared in vaccum as thin jets (diameter 5-30 µm). The jet freezes after passing the interaction region in a liquid nitrogen cooled trap. To protect the beam line from the typical 10-3mbar range in the measurement chamber during liquid jet operation, three differential pumping stages are used. The MCP-based detector is protected by an X-ray transmissive yet vacuum-tight thin foil.Static and time resolved RIXS measurements at liquids and gasses as well as non-linear Processes are conducted with this experimental station at BESSY II and FELs i.e. LCLS and FLASH. The apparatus is open to collaborative Research at BESSY II and FELs.
A setup for resonant inelastic soft x-ray scattering on liquids at free electron laser light sources K . Kunnus et al. Review of scientific instruments 83 (12), 123109 (2012)