Current loss tracked down by magnetic fingerprint
HZB researchers solve the case of lost current in organic solar cells
Conventional solar cells made from crystalline silicon are difficult and energy-intensive to manufacture. Organic solar cells are cheaper, but have always produced less electricity. Why this is so has never been fully explained. Now, a method developed by HZB researchers reveals that current flow inside a solar cell can be affected by the spin of the charge-carrying particles.
Scientists have been working on organic solar cells for about a decade. Their manufacture is environmentally friendly and they can be applied to all kinds of materials, such as plastic film, for instance. The trouble is, they only yield a fifth of the electrical energy that silicon solar cells do, with most of the electrical current trickling away into the material instead.
Scientists at Helmholtz-Zentrum Berlin (HZB) have developed a method that uses the magnetic fingerprint of the charge-carrying particles to reveal exactly how electricity is being lost. They did so by cleverly manipulating the magnetic properties of these particles. Together with Scottish researchers, they have published their findings in Physical Review Letters (10.1103/PhysRevLett.105.176601 / Phys. Rev. Lett. 105, 176601 (2010)).
Being made from carbon compounds, in other words plastics, organic solar cells are also known as plastic solar cells. The heart of the cell is a layer only a hundred millionth of a millimetre thick, made of two components, polymers and soccer ball-shaped fullerenes, mixed together. When light strikes a layer of this mixture, the polymer component is set into an excited state, dubbed an exciton. When an exciton bumps into a fullerene, an electron jumps over to the soccer ball molecule and a “hole” remains behind in the polymer. So that current can flow, the electrons and holes must travel to their respectively opposite contacts. The electrons travel via the fullerenes while the holes travel via the polymer chain. The holes, which scientists call polarons, can obstruct one another along their path and thus reduce the efficiency of the solar cell. This sets the limit on how much electrical energy can be yielded from a given amount of solar energy.
Using electrically detected magnetic resonance (EDMR), the scientists demonstrated that the polarons always get in one another’s way when their magnetic moment (spin) is identical. “For the first time, we have uncovered and thus proven the long-assumed formation of these so-called bipolarons,” says Jan Behrends, who performed the measurements during his doctorate at the HZB Institute for Silicon Photovoltaics.
The researchers’ EDMR method involved manipulating the spin of the polarons using an external magnetic field and a microwave pulse. Using a resonance effect, the randomly distributed spin could be turned and aimed like a compass needle. Measurements revealed that current flows freely when the tiny magnets are oppositely aligned, but is blocked when they are aligned in the same direction.
The researchers demonstrated these current losses in plastic solar cells at room temperature, having redesigned an experimental method originally developed for silicon. “With this important finding, we should soon see advancements in organic solar cell technology as new plastics are introduced that develop no spin blockades”, says project leader Dr. Klaus Lips.
- BESSY II: How intrinsic oxygen shortens the lifespan of solid-state batteriesAlthough solid-state batteries (SSBs) demonstrate high performance and are intrinsically safe, their capacity currently declines rapidly. A team from the TU Wien, Humboldt-University Berlin and HZB has now analysed a TiS₂|Li₃YCl₆ solid-state half-cell in operando at BESSY II using a special sample environment that allows for non-destructive investigation under real operating conditions. Data obtained by combination of soft and hard X-ray photoelectron spectroscopy (XPS and HAXPES) revealed a new degradation mechanism that had not previously been identified in solid-state batteries. They have gained some surprising insights, particularly regarding the harmful role played by intrinsic oxygen. This study provides valuable information for improving design and handling of such batteries.
- Electrocatalysts: New model for charge separation at the solid-liquid interfaceHydrogen is at the heart of the transition to carbon neutrality, as both an energy carrier and a reagent for green chemistry. However, large-scale production of hydrogen via electrolysis, as well as the production of many other chemical products, requires significantly cheaper and more efficient catalysts. A precise understanding of the electrochemical processes that take place at the interface between the solid catalyst and the liquid medium is highly useful for developing better electrocatalysts. In the journal Nature Communications, an European team has now presented a powerful model that determines charge separation at the interface, the formation of the electric double layer and local electric potential variations, and the resulting influence on the catalytic activity.
- Theory meets practice – We’re heading back to HTW Berlin!The HZB’s BIPV consultancy office (BAIP) is once again coordinating and delivering the lecture series “Building-Integrated Photovoltaics”.