Dynamic pattern of Skyrmions observed

The illustration demonstrates skyrmions in one of their Eigen modes (clockwise).

The illustration demonstrates skyrmions in one of their Eigen modes (clockwise). © Yotta Kippe/HZB

Tiny magnetic vortices known as skyrmions form in certain magnetic materials, such as Cu2OSeO3. These skyrmions can be controlled by low-level electrical currents – which could facilitate more energy-efficient data processing. Now a team has succeeded in developing a new technique at the VEKMAG station of BESSY II for precisely measuring these vortices and observing their three different predicted characteristic oscillation modes (Eigen modes).

Cu2OSeO3 is a material with unusual magnetic properties. Magnetic spin vortices known as skyrmions are formed within a certain temperature range when in the presence of a small external magnetic field. Currently, moderately low temperatures of around 60 Kelvin (-213 degrees Celsius) are required to stabilise their phase, but it appears possible to shift this temperature range to room temperature. The exciting thing about skyrmions is that they can be set in motion and controlled very easily, thus offering new opportunities to reduce the energy required for data processing.

Three different Eigenmodes expected

Theoretical work had predicted that it should be possible to use a high-frequency electric field to  excite a group of skyrmions in the sample so that their cores will  rotate all together,  synchronously like a fish swarm, clockwise or counter-clockwise, or alternatively they can even exhibit a “breathing” motion.  Now a team has succeeded in measuring the dynamics of these skyrmions in detail using a single-crystal sample of Cu2OSeO3.

First experimental observation at VEKMAG

The team succeeded at BESSY II in combining a spin-resolving method with an external microwave field. „The resonant magnetic scattering technique when combined with magnetic vectorial external fields shows where the spins are located in the lattice and how they are oriented in space, and all these for each elemental spin species that may exist in the specimen“,  explains Dr. Florin Radu, at the Helmholtz-Zentrum Berlin (HZB),  a physicist who developed and set up the VEKMAG end station in cooperation with partners from the Universität Regensburg, Ruhr University Bochum, and Freie Universität Berlin. The construction and continuing development of the VEKMAG station are supported by the German Federal Ministry of Education and Research (BMBF) and HZB.

Using electric field induced ferromagnetic resonance excitation and recording the x-ray intensity  of a  so called Bragg peak, the research group demonstrated experimentally for the first time that all three characteristic oscillation modes occur in Cu2OSeO3 – the team observed magnetic skyrmions turning clockwise, counterclockwise, and expanding and contracting ("breathing" mode). Those modes can be switched and turned around by changing the frequency of the microwave field: Each dynamic mode is achieved for a certain frequency, which further depends on the external magnetic field as well as on other intrinsic parameters of the sample. “This is a first step towards phase specific characterization of controlled skyrmion’s gyrational motion”, Radu says.

Phys. Rev. Lett. (2019): Ferromagnetic Resonance with Magnetic Phase Selectivity by Means of Resonant Elastic X-Ray Scattering on a Chiral Magnet; S. Pöllath, A. Aqeel, A. Bauer, C. Luo, H. Ryll, F. Radu, C. Pfleiderer, G. Woltersdorf, and C. H. Back

DOI:    10.1103/PhysRevLett.123.167201

arö

  • Copy link

You might also be interested in

  • Perovskite triple-junction solar cells: Even more efficient with GO/SAM bilayers
    Science Highlight
    09.07.2026
    Perovskite triple-junction solar cells: Even more efficient with GO/SAM bilayers
    Perovskite semiconductors efficiently convert sunlight into electrical energy; they are also inexpensive and extremely lightweight. A team at HZB has developed a triple-junction solar cell comprising different perovskite semiconductors, with a novel bilayer of graphene oxide (GO) and a self-assembled monolayer (SAM) as the hole conductor. This bilayer significantly increases both efficiency and long-term stability. The efficiency of the novel perovskite triple-junction solar cell is 27.3% and shows hardly any decline even after more than 770 hours of operation. The study has been published in the renowned journal Joule.
  • Magnetic imaging: Micro-flowers increase the local magnetic field
    Science Highlight
    06.07.2026
    Magnetic imaging: Micro-flowers increase the local magnetic field
    Materials with magnetic nanostructures have many potential applications such as in spintronics. To explore such materials, nanoscale magnetic-sensitive imaging techniques are very useful, but up to now only weak magnetic fields could be applied during the imaging process. Now an international collaboration led by Dr. Sergio Valencia, HZB, has developed an approach that overcomes this limitation. The team designed tiny magnetic flux concentrators (MFCs), into which the sample is placed. The geometry of the MFCs resembles a flower with a number of petals which focus the applied magnetic field into its center. This greatly expands the magnetic field range available during imaging, and so the range of magnetic systems that can be investigated. The micro-flowers, enhancing magnetic fields locally, can find application in different nanometric magnetic microscopy techniques.
  • CIGS-perovskite tandem cell achieves record efficiency of 25.5 %
    News
    30.06.2026
    CIGS-perovskite tandem cell achieves record efficiency of 25.5 %
    A Berlin-based team from HZB and Center for the Science of Materials Berlin (CSMB) at the Humboldt-Universität zu Berlin has set a new record for a tandem solar cell. Using a combination of a CIGS semiconductor layer and perovskite, along with several optimised intermediate layers, they were able to convert 25.5% of sunlight into electrical energy. The previous record for this combination of materials and this size of cell stood at 24.6%. The new record has been certified and is visible in the prestigious Solar Cell Efficiency Tables (the "Green Tables"), which serve as the definitive ledger for the global photovoltaic community.