Topological materials for information technology offer lossless transmission of signals

The TEM image shows the superstructure which is created by doping of Bi<sub>2</sub>Te<sub>3</sub> with manganese: Between the originally 5-atom-layer thick units (QL) new 7-atom-layer units are formed by self-organization in which the manganese occupies the central layers.

The TEM image shows the superstructure which is created by doping of Bi2Te3 with manganese: Between the originally 5-atom-layer thick units (QL) new 7-atom-layer units are formed by self-organization in which the manganese occupies the central layers. © G. Springholz/Uni Linz

New experiments with magnetically doped topological insulators at BESSY II have revealed possible ways of lossless signal transmission that involve a surprising self-organisation phenomenon. In the future, it might be possible to develop materials that display this phenomenon at room temperature and can be used as processing units in a quantum computer, for example. The study has been published in the renowned journal Nature.

New effects in solid-state physics are often first discovered at temperatures near absolute zero (0 Kelvin or -273 °C). Further research can then determine whether and how these phenomena can be induced at room temperature as well. So it was that superconductivity was initially observed in mercury below 4 Kelvin more than 100 years ago. Today, there are many high-temperature superconductors that conduct electrical current without resistive losses at temperatures as high as 138 Kelvin or even 200 Kelvin (the record held by H2S).

Lossless charge transport

The Quantised Anomalous Hall Effect (QAHE) was observed for the first time in a magnetically doped topological insulator below 50 millikelvin in 2013. Similar to superconductivity, this effect allows lossless charge transport within thin edge channels of the samples. Meanwhile, it has been achieved to increase the maximum temperature at which the effect can be observed up to about 1 Kelvin.

However, based on theoretical considerations, the QAHE should occur at much higher temperatures. So it is a mystery as to why this does not happen. One critical parameter is known as the magnetic energy gap of the sample, but no one has ever measured it before. The larger this gap, the more stable the effect should be towards the influence of temperature.

Breakthrough at BESSY II

An international team headed by HZB physicist Prof. Dr. Oliver Rader and Prof. Dr. Gunther Springholz from the University of Linz has achieved a breakthrough. By photoelectron spectroscopy with synchrotron radiation of BESSY II they have been able to measure the energy gap in such a sample for the first time. To accomplish this, the equipment named ARPES1cube was used to reach extremely low temperatures as well as the new spin-resolving capability of the Russian-German Laboratory at BESSY II. Surprisingly, the gap was actually five times larger than theoretically predicted.

Self organised superstructure

The scientists also found a simple reason for this result: “We now know that manganese doping does not happen in a disordered manner. On the contrary, it causes stratification known as a superstructure in the material – layers much like a puff pastry”, explains Springholz. “By adding a few per cent of manganese, alternating units of seven and five layers are created. This causes the manganese to be preferentially contained within the seven-layer units and thus can generate the energy gap much more effectively.”

Rader says in retrospect that researchers' imaginations in using dopants has not extended far enough to date. They used trivalent elements such as chromium and vanadium that have magnetic characteristics to substitute for the bismuth in bismuth telluride (Bi2Te3), with the dopant atoms in a disordered state. The reason for this seemed very convincing: trivalent magnetic elements contribute three electrons to chemical bonds and their chemical valence leads these elements to the bismuth sites. With manganese, the situation is different. Since manganese is bivalent, it does not really fit well in the bismuth sites. That is apparently why the system becomes radically restructured and creates a new double layer of atoms in which manganese can be bivalently incorporated. “In this way, a structure is created – in a self-organized way - in which manganese can produce the large magnetic energy gap”, explains Rader.

Outlook quantum computing

If these self-organisation phenomena are exploited in specific ways, then completely new configurations can emerge for magnetic topological materials, according to Springholz. In principle, the gap that has now been measured is already so large that it should enable construction of a near-room-temperature QAHE from appropriate components. However, other parameters still need to be improved. A magnetic topological insulator like this in combination with an ordinary superconductor could also permit the realisation of a quantum processing unit (Qbit) for a quantum computer.

Nature (2019): Large magnetic gap at the Dirac point in Bi2Te3/MnBi2Te4 heterostructures. E. D. L. Rienks, S. Wimmer, J. Sánchez-Barriga, O. Caha, P. S. Mandal, J. Růžička, A. Ney, H. Steiner, V. V. Volobuev, H. Groiss, M. Albu, G. Kothleitner, J. Michalička, S. A. Khan, J. Minár, H. Ebert, G. Bauer, F. Freyse, A. Varykhalov, O. Rader & G. Springholz

DOI: 10.1038/s41586-019-1826-7

arö

  • Copy link

You might also be interested in

  • BESSY II: New sample environment allows glimpse into thermocatalytic processes
    Science Highlight
    15.07.2026
    BESSY II: New sample environment allows glimpse into thermocatalytic processes
    A novel measurement cell allows, for the first time, soft and hard X-ray investigations under high pressures of up to 20 bar and temperatures of up to 400°C. This provides new insights into thermocatalytic processes, such as the Fischer-Tropsch synthesis for producing synthetic fuels. The development of the measurement cell is considered a significant achievement within the Care-O-Sene project.

  • Precision interface chemistry pushes perovskite solar cells beyond 26% efficiency
    Science Highlight
    14.07.2026
    Precision interface chemistry pushes perovskite solar cells beyond 26% efficiency
    An international research collaboration has developed a new molecular strategy for controlling one of the most critical interfaces in perovskite solar cells. The resulting solar cells reached a power conversion efficiency of 26.19% in the n i p architecture, together with strong operational stability under prolonged illumination and elevated temperature. The results have been published in the Journal of the American Chemical Society.
  • Perovskite triple-junction solar cells: Even more efficient with GO/SAM bilayers
    Science Highlight
    09.07.2026
    Perovskite triple-junction solar cells: Even more efficient with GO/SAM bilayers
    Perovskite semiconductors efficiently convert sunlight into electrical energy; they are also inexpensive and extremely lightweight. A team at HZB has developed a triple-junction solar cell comprising different perovskite semiconductors, with a novel bilayer of graphene oxide (GO) and a self-assembled monolayer (SAM) as the hole conductor. This bilayer significantly increases both efficiency and long-term stability. The efficiency of the novel perovskite triple-junction solar cell is 27.3% and shows hardly any decline even after more than 770 hours of operation. The study has been published in the renowned journal Joule.