CIGSe thin-film solar cells: EU Sharc25 project increases efficiency
Research on the EU project Sharc25 also took place in the EMIL laboratory, where thin films and materials can be analysed with X-rays from BESSY II. © Ingo Kniest/HZB
Thin-film solar cells made of copper, indium, gallium, and selenium (CIGSe) are cost-effective to produce and now achieve efficiencies of significantly more than 20 percent. This level of performance was achieved through post-processing with alkali elements, and the procedures are suitable for industrial-scale production. Insights into the beneficial effect of these alkali treatments from the EU Sharc25 project have now been collected in an article published in Advanced Energy Materials.
Producing thin-film solar modules requires much less energy than conventional wafer-based Si PV modules, and therefore their energy payback time is much shorter. Chalcopyrite-structured compounds of copper, indium, gallium, and selenium (CIGSe) are an important class of materials for thin-film PV, because CIGSe absorbs incident light much better than silicon, and so a very thin layer grown on a substrate via coevaporation suffices to convert light into electrical energy efficiently.
Efficiency up to 22,6 percent
The European Sharc25 research project approached the challenge of optimizing the conversion efficiency of CIGSe thin film technology from multiple angles, combining theoretical modelling, experimental characterization, and sharing of technological expertise between several leading research groups throughout Europe. During the project, the efficiency of CIGSe solar cells produced within the consortium rose from 21.7 to 22.6 percent.
One focus of the project was to understand the positive effects of post-processing with the alkali elements potassium, rubidium, and cesium. This post-processing changes the chemical and electronic surface properties of the CIGSe absorber. In addition, the alkali atoms migrate from the surface into the grain boundaries between the CIGSe grains, which improves the electronic properties of the thin film. The recombination of charge carriers in the bulk CIGSe is reduced, among other effects. This beneficial effect is observed for CIGSe layers prepared at various temperatures and on different substrates.
Know-how for european industries
Eleven research institutions from eight countries, including an HZB team headed by Prof. Marcus Bär, collaborated on the EU Sharc25 project. An important goal was to secure Europe‘s pioneering role in the field of thin-film PV. “It is certainly a competitive advantage to be able to address questions related to applied materials research and to the development of industry-oriented devices using advanced research tools. To do so efficiently, we learn in such large EU projects. This represents a significant advantage and preserves the crucial edge in knowledge and know-how“, says Bär.
Partners: EMPA (CH), the Universities of Luxembourg (LU), Rouen (F), Parma (I), and Aalto (FIN), IMEC (B), HZB (D), INL (P), Flisom AG (CH), and Manz CIGS Technology GmbH (D). The Centre for Solar Energy and Hydrogen Research Baden-Württemberg (ZSW) coordinated the project.
The study has been published in Adv. Energy Materials (2020): Heavy alkali treatment of Cu(In,Ga)Se2 solar cells: Surface versus bulk effects
DOI: 10.1002/aenm.201903752
http://sharc25.eu/ has received funding from the European Union’s Horizon 2020 Framework Programme for Research and Innovation under grant agreement No 64100.
- Bright prospects for tin perovskite solar cellsPerovskite solar cells are widely regarded as the next generation photovoltaic technology. However, they are not yet stable enough in the long term for widespread commercial use. One reason for this is migrating ions, which cause degradation of the semiconducting material over time. A team from HZB and the University of Potsdam has now investigated the ion density in four different, widely used perovskite compounds and discovered significant differences. Tin perovskite semiconductors produced with an alternative solvent had a particular low ion density — only one tenth that of lead perovskite semiconductors. This suggests that tin-based perovskites could be used to make solar cells that are not only really environmentally friendly but also very stable.
- Synchrotron radiation sources: toolboxes for quantum technologiesSynchrotron radiation sources generate highly brilliant light pulses, ranging from infrared to hard X-rays, which can be used to gain deep insights into complex materials. An international team has now published an overview on synchrotron methods for the further development of quantum materials and technologies in the journal Advanced Functional Materials: Using concrete examples, they show how these unique tools can help to unlock the potential of quantum technologies such as quantum computing, overcome production barriers and pave the way for future breakthroughs.
- Joint Kyiv Energy and Climate Lab goes liveHelmholtz-Zentrum Berlin and the National University of Kyiv-Mohyla Academy established on 27 November a Joint Energy and Climate Lab.