Imaging Ellipsometry for Process Control of Thin-Film Devices
Left: Thickness image of MXene-based capacitive comb-structure devices (light contrast) on a silicon wafer with 100 nm oxide (red). Right: Two magnifications highlighting film homogeneity at the microscale. With an average thickness of 5.4 nm, small variations across the microstructured device are visible according to the color scale. © Applied Physics Letters (2026)
Imaging ellipsometry maps of a MXene-based comb structure showing film thickness at two length scales (left, middle) as well as conductivity (right). © Applied Physics Letters (2026)
A German–Israeli research team led by Dr. Andreas Furchner has demonstrated how imaging ellipsometry enables non-destructive characterisation and quality control of microstructured MXene thin films during device fabrication. The authors used two complementary ellipsometry approaches for precise, multi-scale access to key material properties. The work positions imaging ellipsometry as a powerful platform for monitoring thin-film uniformity, device integrity, and functionality throughout processing, including critical lithographic steps. The study was published in Applied Physics Letters and selected as an Editor’s Pick.
MXenes are two-dimensional nanomaterials that can serve as building blocks for microscale electronic and photonic devices, often referred to as MXetronics. At Tel Aviv University, structured MXene-based thin films are being investigated as backside electrodes in next-generation photodetectors. Imaging ellipsometry turned out to be a crucial non-destructive technique for monitoring their properties throughout processing without damaging the device.
By analyzing changes in the polarization state of light reflected off the device, ellipsometry provides direct, quantitative access to thin-film characteristics such as thickness, composition, and charge-transport properties. The resulting optical contrast is highly sensitive to even subtle lateral variations across a sample. The method is not only imaging structures but also functionality, which makes ellipsometry valuable for device fabrication.
The authors pursued two optical approaches. Spectroscopic micro-ellipsometry (SME), available at The Hebrew University of Jerusalem, provides high-resolution single-spot measurements that enable rapid probing of samples. SME is well suited for targeted checks and high-throughput assessment during fabrication, giving a fast snapshot of what is happening at a precise point on the device.
Imaging spectroscopic ellipsometry (ISE), by contrast, provides spatially resolved imaging across full thin-film devices. At HZB, a Park Systems imaging ellipsometer is available for large-scale imaging, complemented by a unique focusing optic with lateral resolution down to 1 µm. This enables structural and functional film properties to be mapped across entire devices, effectively connecting millimeter to micrometer length scales in a single comprehensive measurement approach.
A particular strength of the method is its ability to monitor and visualize how local properties evolve during processing steps such as photoresist development. These changes can be tracked through their impact on the optical response, revealing spatial variations in charge-transport and structural properties without contacting the device. Local properties can thereby be correlated with overall device functionality, which is essential for optimization and fabrication.
There is already keen interest in the method, both within HZB and from international research groups, which has led to ongoing collaborations. The highly versatile ellipsometer is suitable for analyzing a wide range of isotropic and anisotropic materials, including two-dimensional systems. The HZB team always welcomes interested researchers to get in touch for measurements or potential collaborations.
- Disorder creates new properties in compound semiconductorsAn international research team has demonstrated that the intrinsic disorder of the compound semiconductor CuInSnS₄ can be exploited to influence its optical properties. While the atomic vibrations also sense the local disorder, their response is averaged over many different local environments and therefore appear isotropic, as expected for a cubic crystal. In contrast, the optical excitations, known as excitons, are much more sensitive to the local arrangement of atoms. Surprisingly, they show a direction-dependent optical response even though the average crystal structure is cubic. These findings shed new light on the relationship between disorder and material properties, opening up new options for targeted 'disorder engineering' in optoelectronic and photocatalytic devices.
- Perovskite solar cells: Predictions of long-term stabilityReliable statements about the long-term stability of perovskite solar cells are still difficult to make. However, a new study by Dr Carolin Ulbrich’s team, published in the renowned journal Joule, highlights which methods are useful for this purpose and identifies areas where further research is needed.
- Superconducting TES array X-ray spectrometer goes into operation at BESSY IIEurope's first and only TES-spectrometer at a synchrotron source is now in operation at BESSY II, developed within a collaboration between the HZB, the MPI-CEC (Mühlheim-an-der-Ruhr, Germany) and the NIST (Boulder CO, USA). The photon detection efficiency of the new instrument exceeds that of wavelength-dispersive X-ray emission spectrometers by a factor of 100 to 1000. It will be used to investigate the electronic properties of atomically thin layers, nanostructures and highly diluted atomic and molecular samples. The team is looking forward to receiving exciting research proposals from the user community.