CIGS-perovskite tandem cell achieves record efficiency of 25.5 %

The tandem solar cell shown here combines CIGSe and perovskite semiconductors. It is slightly larger than 1 square centimeter and achieves a record efficiency of 25.5% for this combination of materials.

The tandem solar cell shown here combines CIGSe and perovskite semiconductors. It is slightly larger than 1 square centimeter and achieves a record efficiency of 25.5% for this combination of materials. © G. Farias Basulto / HZB

A Berlin-based team from HZB and Center for the Science of Materials Berlin (CSMB) at the Humboldt-Universität zu Berlin has set a new record for a tandem solar cell. Using a combination of a CIGS semiconductor layer and perovskite, along with several optimised intermediate layers, they were able to convert 25.5% of sunlight into electrical energy. The previous record for this combination of materials and this size of cell stood at 24.6%. The new record has been certified and is visible in the prestigious Solar Cell Efficiency Tables (the "Green Tables"), which serve as the definitive ledger for the global photovoltaic community.

To be included in this special ‘record table’, not only is a high efficiency required, but also an area of more than 1 cm2. The well-known NLR-table (formerly NREL), by contrast, only lists the maximum efficiency per technology, even if the cell has an area of 0.001 cm2.

'To push past our previous milestone within the framework of the European project SOLMATES, we employed CIGSe-bottom cells with different band gaps (i.e. 1.05 eV and 1.1 eV) and two different thicknesses of aluminium doped zink oxides with similar characteristics. We also tested different cell architectures, added to the continuous improvements we had achieved with our previous record,' says Dr. Guillermo Farias Basulto.

By aiming to reduce interfacial recombination losses and improve device stability, chemist Wuai Zhang screened multiple combinations of nickel oxide (NiOx) and self-assembled monolayers (SAMs) as hole transport material. Zhang also refined the electron-selective contact processing by regulating the initial thermal evaporation rate of Buckminsterfullerene (C60) onto an ultra-thin (1 nm) lithium fluoride (LiF) passivation layer.

The cell has an area of 1.081 cm2, which, of course, is still small. However, within the SOLMATES project, Nicolas Otto from the University of applied sciences in Berlin (HTW) together with Thede Mehlhop from HZB were able to able to fabricate a mini- module with a similar stack of materials with about 19.7 % efficiency with an area of 2.25cm2.

‘The physics embedded in our current cell architecture suggests that 25.5% is merely a steppingstone, given that our in-house testing of similar architectures have already reached efficiencies of 27.5%’, Farias-Basulto points out.

 

red.

  • Copy link

You might also be interested in

  • Nanosilver as an electrocatalyst for CO₂ reduction
    Science Highlight
    24.09.2026
    Nanosilver as an electrocatalyst for CO₂ reduction
    Via electrolysis, CO2 can be reduced to CO, a raw material for further chemical products such as fuels. Within the GreenQuest Project, an internation team led by HZB chemist Prashanth Menezes has now systematically investigated catalyst layers made of silver nanoparticles, varying both the size of the particles and their density. The best yield was achieved with nanoparticles with diameters of around 10 nm, which were loosely distributed. Furthermore, they demonstrated how the economic efficiency of the electrochemical cell can be enhanced by integrating an additional chemical reaction at the anode, enabling the simultaneous production of a valuable formic acid, hydrogen, and CO in one device.
  • Spin waves inside a nano-oscillator imaged for the first time
    Science Highlight
    23.09.2026
    Spin waves inside a nano-oscillator imaged for the first time
    For the first time, researchers have directly imaged the magnetisation dynamics inside a spin Hall nano-oscillator — a nanoscale device that converts direct current into tunable microwave signals and is a promising building block for energy-efficient wireless communication and brain-inspired computing. A Swedish–German team led by the University of Gothenburg and Helmholtz-Zentrum Berlin (HZB) achieved this using time-resolved scanning transmission X-ray microscopy at the MAXYMUS instrument at BESSY II. The results, now published in Advanced Materials, reveal spin-wave features that had escaped previous, indirect measurement techniques.
  • Joint power instead of duplicate structures:
    News
    18.09.2026
    Joint power instead of duplicate structures:
    Berlin’s research community is further advancing its research excellence by establishing a high-performance, cross-institutional infrastructure for data and AI. With a joint agreement signed on 18 September 2026, the Berlin University Alliance (BUA), the Helmholtz-Zentrum Berlin (HZB) and the Zuse Institute Berlin (ZIB) are paving the way for a joint data science and AI centre in Berlin-Dahlem and Adlershof.