Even thinner solar cells through use of nanoparticles

The topography of the sample surface can be seen here (white lines around the nano-particles) as well as the local optical excitations. The image displays several &ldquo;hot spots&rdquo; (yellow) that arise through interactions of the nanoparticles with the light and also with one another.<br />

The topography of the sample surface can be seen here (white lines around the nano-particles) as well as the local optical excitations. The image displays several “hot spots” (yellow) that arise through interactions of the nanoparticles with the light and also with one another.
© HZB/CalTech

The silver nanoparticles are irregularly shaped and randomly distributed over the surface, as shown by the scanning electron microscope image.<br />

The silver nanoparticles are irregularly shaped and randomly distributed over the surface, as shown by the scanning electron microscope image.
© HZB

Nanostructures could enable more light to be directed into the active layer of solar cells, increasing their efficiency. Prof. Martina Schmid (HZB und Freie Univ. Berlin) has now measured how irregularly distributed silver particles influence the absorption of light. She demonstrated that nanoparticles interact with one another via their electromagnetic near-fields, so that local “hot spots” arise where light is concentrated especially strongly.

The work has been classified by Europhysics News, the magazine of the European Physical Society, as a highlight and points the way for improved designs of these kinds of nanostructures.

It is desirable even with thin-film solar cells to utilise less material and thereby save on fabrication costs. As an example, chalcopyrite cells (i.e. copper-indium-gallium-diselenide, or ‘CIGS’ cells) in part consist of rare-earth elements like indium and gallium. If the active layer is made too thin, however, it absorbs too little light and the efficiency level drops. Nanostructures on top of the active material might be able to capture the light and thus increase the efficiency. This idea is being pursued by Prof. Martina Schmid, who heads the NanooptiX group of junior scientists at HZB and holds a junior professorship at Freie University Berlin. “Our objective is to optimise nanostructures so they selectively direct certain wavelengths of the solar spectrum into the cells.”

Irregularly distributed nanoparticles
One option to achieve this is to construct simple nanostructures from metallic particles that self-organise by heat-treatment of a thin metallic film. Martina Schmid initially coated a glass substrate with an extremely thin film of silver (20 nm), which she subsequently subjected to heat treatment. Irregular silver particles are formed in this way having diameters of around 100 nanometres.

Traversing the sample with the “light pick”
In collaboration with colleagues at the California Institute of Technology (CalTech), Schmid investigated how these types of randomly distributed nanoparticles influence the incidence of light on a cell below. They used a particularly sensitive method known as scanning near-field optical microscopy (SNOM). In this technique, an extremely tiny point scans the sample, determining the topography as with atomic force microscopy. However, it also simultaneously illuminates the sample through an even smaller aperture in the probe point to create optical excitations (plasmons) in the nanoparticles. These optical excitations can either couple the light into the solar cell as desired - or instead transform the light into heat, whereby it is lost to the solar cell.

It’s all about neighbourhood: interactions determine the light scattering
Measurements showed that there can be strong interactions between densely situated, irregularly distributed nanoparticles leading to local "hot spots". „Whereas the darker regions tend to absorb light and transform it into heat, the hot spots show where nanoparticles strongly interact via their electromagnetic near-fields. In these regions of enhanced fields, energy transformation in the solar cell could potentially be enhanced“, Martina Schmid explains.

In the end, areas of stronger fields but also of comparatively weaker ones arise. However, it is difficult to establish a clear relationship between the occurrence of these hot spots and specific nanoparticles. “The particles mutually affect one another through their electromagnetic near-fields, which are notably more complex than suspected until now. We need to ascertain how we can intentionally create the desired field distributions", explains Schmid. She will investigate these questions further at HZB and at the Freie Universität Berlin together with the research group headed by Prof. Paul Fumagalli.

Original publication: M. Schmid, J. Grandidier and H. A. Atwater, “Scanning near-field optical microscopy on dense random assemblies of metal nanoparticles“, J. Opt., 15, 125001 (2013)
The text can be retrieved free of charge here.

Afterword: Prof. Martina Schmid heads the Nano-Optical Concepts for Photovoltaics” (NanooptiX)” group of junior scientists. She also holds a junior professorship at the Freie Universität Berlin. The experimental work was carried out during her postdoc period at the renowned California Institute of Technology (Caltech) in the group headed by Prof. Harry Atwater.

The Photonics Europe conference of SPIE, the international society for optics and photonics, takes place in Brussels 14-17 April, where PhD-Student Patrick Andrae from the NanooptiX-group will give a talk on the topic.

arö

  • Copy link

You might also be interested in

  • Long-term stability for perovskite solar cells: a big step forward
    Science Highlight
    07.11.2025
    Long-term stability for perovskite solar cells: a big step forward
    Perovskite solar cells are inexpensive to produce and generate a high amount of electric power per surface area. However, they are not yet stable enough, losing efficiency more rapidly than the silicon market standard. Now, an international team led by Prof. Dr. Antonio Abate has dramatically increased their stability by applying a novel coating to the interface between the surface of the perovskite and the top contact layer. This has even boosted efficiency to almost 27%, which represents the state-of-the-art. After 1,200 hours of continuous operation under standard illumination, no decrease in efficiency was observed. The study involved research teams from China, Italy, Switzerland and Germany and has been published in Nature Photonics.
  • Successful master's degree in IR thermography on solar facades
    News
    22.10.2025
    Successful master's degree in IR thermography on solar facades
    We are delighted to congratulate our student employee Luca Raschke on successfully completing her Master's degree in Renewable Energies at the Hochschule für Technik und Wirtschaft Berlin - and with distinction!
  • TT-Award 2025: Perovskite solar cells from Germany
    News
    15.10.2025
    TT-Award 2025: Perovskite solar cells from Germany
    Photovoltaics is the leading technology in the transition to clean energy. However, traditional silicon-based solar technology has reached its efficiency limit. Therefore, a HZB-team has developed a perovskite-based multi-junction cell architecture. For this, Kevin J. Prince and Siddhartha Garud received the Helmholtz-Zentrum Berlin's (HZB) Technology Transfer Prize of 5,000 euros.