Green hydrogen: ‘Artificial leaf’ becomes better under pressure
The efficiency of a PEC cell depends on many factors, including the size of the gas bubbles.
© Feng Liang /HZB
The combined energy losses have been evaluated up to 20 bar of the PEC-generated hydrogen. Efficiency losses are lowest at a pressure of 6-8 bar, especially optical and thermodynamic losses. The team achieved this result by combining experimental data with a physical model. © HZB/Nature Communications 2024
Hydrogen can be produced via the electrolytic splitting of water. One option here is the use of photoelectrodes that convert sunlight into voltage for electrolysis in so called photoelectrochemical cells (PEC cells). A research team at HZB has now shown that the efficiency of PEC cells can be significantly increased under pressure.
Some call it an ‘artificial leaf’: instead of the natural Photosystem II complex that green leaves in nature use to split water with sunlight, photoelectrochemical cells, or PEC cells for short, use artificial, inorganic photoelectrodes to generate the voltage required for the electrolytic splitting of water from sunlight.
Minimising losses
The best performing devices already achieve impressive energy conversion efficiencies of up to 19 per cent. At such high efficiencies, losses due to bubble formation start to play an important role. This is because bubbles scatter light, preventing optimal illumination of the electrode. Moreover, bubbles may block the electrolyte from contacting the electrode surface and thus cause electrochemical deactivation. To minimize these losses, it would help to reduce the bubble sizes by operating the device at higher pressure. However, all PEC devices reported thus far have been operating at atmospheric pressure (1 bar).
Enhancing the pressure
A team from the Institute for Solar Fuels at HZB has now investigated water splitting at elevated pressure under PEC-relevant conditions. They used gas to pressurise PEC flow cells to between 1 and 10 bar and recorded a number of different parameters during electrolysis. They also developed a multiphysics model of the PEC process and compared it with experimental data at normal and elevated pressure.
This model now allows to play with the parameters and identify the key levers. “For example, we investigated how the operating pressure affects the size of the gas bubbles and their behaviour at the electrodes," says Dr Feng Liang, first author of the paper now published in Nature Communications.
Energy losses halved
The analysis shows that increasing the operating pressure to 8 bar halves the total energy loss, which could lead to a relative increase of 5-10 percent in the overall efficiency. “The optical scattering losses can be almost completely avoided at this pressure," explains Liang. “We also saw a significant reduction in product cross-over, especially the transfer of oxygen to the counter electrode”.
At higher pressures, however, there is no advantage, so the team suggests 6-8 bar as the optimum operating pressure range for PEC electrolysers. “These findings, and in particular the multiphysics model, can be extended to other systems and will help us to increase the efficiencies of both electrochemical and photocatalytic devices," says Prof. Dr. Roel van de Krol, who heads the Institute for Solar Fuels at HZB.
Note: The work was funded by the Helmholtz Innopool project 'Solar H2: Highly Pure and Compressed'. The science team wants to express its heartfelt gratitude to Christian Höhn, Markus Bürger, Lars Drescher, Torsten Wagner for their unwavering contributions to the construction of this high-pressure flow cell.
- Iridium-free catalysts for acid water electrolysis investigatedHydrogen will play an important role, both as a fuel and as a raw material for industry. However, in order to produce relevant quantities of hydrogen, water electrolysis must become feasible on a multi-gigawatt scale. One bottleneck is the catalysts required, with iridium in particular being an extremely rare element. An international collaboration has therefore investigated iridium-free catalysts for acidic water electrolysis based on the element cobalt. Through investigations with various methods, among them experiments at the LiXEdrom at the BESSY II X-ray source in Berlin, they were able to elucidate processes that take place during water electrolysis in a cobalt-iron-lead oxide material as the anode. The study is published in Nature Energy.
- Lithium-sulphur batteries with lean electrolyte: problem areas clarifiedUsing a non-destructive method, a team at HZB investigated practical lithium-sulphur pouch cells with lean electrolyte for the first time. With operando neutron tomography, they could visualise in real-time how the liquid electrolyte distributes and wets the electrodes across multilayers during charging and discharging. These findings offer valuable insights into the cell failure mechanisms and are helpful to design compact Li-S batteries with a high energy density in formats relevant to industrial applications.
- Self assembling monolayer can improve lead-free perovskite solar cells tooTin perovskite solar cells are not only non-toxic, but also potentially more stable than lead-containing perovskite solar cells. However, they are also significantly less efficient. Now, an international team has succeeded in reducing losses in the lower contact layer of tin perovskite solar cells: The scienstists identified chemical compounds that self-assemble into a molecular layer that fits very well with the lattice structure of tin perovskites. On this monolayer, tin perovskite with excellent optoelectronic quality can be grown, which increases the performance of the solar cell.