Spin waves inside a nano-oscillator imaged for the first time

Measurements on Maxymus show (left) that the magnon amplitude does not increase uniformly at both edges of the constriction, but only at one edge. This experimental finding can only be reproduced by micromagnetic simulations if three effects that have hitherto been neglected are taken into account (right).

Measurements on Maxymus show (left) that the magnon amplitude does not increase uniformly at both edges of the constriction, but only at one edge. This experimental finding can only be reproduced by micromagnetic simulations if three effects that have hitherto been neglected are taken into account (right). © Advanced Materials (2026): DOI: 10.1002/adma.74547

Illustration of a spin Hall nano-oscillator: First, a layer of a heavy metal (tungsten-tantalum) is deposited onto a substrate, followed by a layer of magnetic cobalt-iron-boron (green) just 1.4 nm thick, which is then covered with a nanometre-thick layer of magnesium oxide (yellow). When a current is passed through the constriction, the local magnetic moments begin to precess, generating a high-frequency signal.

Illustration of a spin Hall nano-oscillator: First, a layer of a heavy metal (tungsten-tantalum) is deposited onto a substrate, followed by a layer of magnetic cobalt-iron-boron (green) just 1.4 nm thick, which is then covered with a nanometre-thick layer of magnesium oxide (yellow). When a current is passed through the constriction, the local magnetic moments begin to precess, generating a high-frequency signal. © Advanced Materials (2026): DOI: 10.1002/adma.74547

For the first time, researchers have directly imaged the magnetisation dynamics inside a spin Hall nano-oscillator — a nanoscale device that converts direct current into tunable microwave signals and is a promising building block for energy-efficient wireless communication and brain-inspired computing. A Swedish–German team led by the University of Gothenburg and Helmholtz-Zentrum Berlin (HZB) achieved this using time-resolved scanning transmission X-ray microscopy at the MAXYMUS instrument at BESSY II. The results, now published in Advanced Materials, reveal spin-wave features that had escaped previous, indirect measurement techniques.

Spin Hall nano-oscillators (SHNOs) are among the most versatile devices in spintronics: a direct current driven through a nanometre-sized constriction sets the local magnetisation into steady precession, turning a DC input into a tunable radio-frequency output. Because SHNOs are easy to fabricate, CMOS-compatible and can be mutually synchronised in large arrays, they are considered a model platform for tunable microwave sources and for neuromorphic, wave-based computing. Yet what actually happens inside a single oscillator had never been observed directly — the dynamics unfold on nanometre length scales and within fractions of a nanosecond.

The team at the University of Gothenburg fabricated SHNOs based on ultrathin CoFeB layers and characterised their microwave dynamics. To look inside the devices, the group teamed up with the team at HZB, together with colleagues from the Max Planck Institute for Intelligent Systems in Stuttgart. At the scanning transmission X-ray microscope MAXYMUS, operated at the BESSY II electron storage ring in Berlin, the researchers filmed the magnetisation dynamics stroboscopically, using X-ray magnetic circular dichroism as contrast mechanism — with a spatial resolution of a few tens of nanometres and a time resolution well below the period of the oscillations at about 6 GHz.

The X-ray movies show that the spin-wave auto-oscillations concentrate at the two edges of the nanoconstriction — but with a pronounced asymmetry favouring one edge — and that the emitted spin waves propagate in a strongly anisotropic way, moving out perpendicular to the applied magnetic field.  Micromagnetic simulations could only reproduce these observations after three effects that are usually neglected were taken into account. First, the magnetic film is not perfectly uniform, but consists of tiny crystal grains whose boundaries affect the spin waves. Second, nanofabrication slightly weakens the perpendicular magnetic anisotropy — the built-in tendency of the magnetisation to point out of the film plane — which shifts the spots from which the waves are emitted. And third, a subtle interface effect, the Dzyaloshinskii–Moriya interaction, makes spin waves travelling in opposite directions behave differently, which explains the one-sidedness of the emission. Only with all three ingredients did simulation and experiment agree — a clear sign that the physical models used to design SHNOs and their synchronised networks need to be refined.

The measurements also produced an unexpected side observation: under prolonged illumination with intense soft X-rays, the magnetic properties of the samples changed gradually and permanently. This effect concerns the particular material combination studied here — an ultrathin CoFeB layer covered with MgO — and not magnetic materials in general. Yet, precisely this CoFeB/MgO interface is a standard ingredient of today’s spintronic devices, which are often considered for use in high-radiation environments such as satellites and other spacecraft. How such devices respond to large radiation doses therefore deserves a closer look.

“Only by seeing the spin waves directly could we understand which ingredients really govern these oscillators. Effects like grain boundaries and the Dzyaloshinskii–Moriya interaction turned out to be essential, not optional,” says Sebastian Wintz, who led the measurements at BESSY II.

 “We know that SHNOs can synchronize in very large networks. What this direct imaging gives us is a much firmer microscopic basis for understanding and controlling how spin waves set the coupling and phase relationships within those networks,” adds Johan Åkerman who is leading the team at University of Gothenburg.

Note:

The work was supported, among others, by the European Research Council (ERC Advanced Grant “TOPSPIN”, Grant No. 835068), the Knut and Alice Wallenberg Foundation through the Wallenberg Scholars programme (KAW 2022.0079), the Swedish Research Council through a Distinguished Professor Grant (Grant No. 2024-01943) and the Helmholtz Young Investigator Group programme.

red. with AI-assistance (Claude Fable 5)

  • Copy link

You might also be interested in

  • Joint power instead of duplicate structures:
    News
    18.09.2026
    Joint power instead of duplicate structures:
    Berlin’s research community is further advancing its research excellence by establishing a high-performance, cross-institutional infrastructure for data and AI. With a joint agreement signed on 18 September 2026, the Berlin University Alliance (BUA), the Helmholtz-Zentrum Berlin (HZB) and the Zuse Institute Berlin (ZIB) are paving the way for a joint data science and AI centre in Berlin-Dahlem and Adlershof.
  • New technique could make MRI more precise
    Science Highlight
    17.09.2026
    New technique could make MRI more precise
    A team of researchers at the University of Stuttgart and HZB has developed a new method that could make MRI even more precise by eliminating “dead time,” a key limiting factor in the measurement process, thereby enabling the detection of signals that are lost using conventional methods. This method opens up new possibilities for medical diagnostics and non-destructive materials testing. The research team presents the new approach in Science Advances. 
  • Marcel Risch has been appointed Professor at the Freie Universität Berlin
    News
    17.09.2026
    Marcel Risch has been appointed Professor at the Freie Universität Berlin
    Marcel Risch was appointed to a W2-S professorship in the Department of Physics at Freie Universität Berlin in August 2026. His research group has been transformed into the department 'Mechanisms of Sustainable Electrocatalysis'. Risch investigates the fundamental mechanisms of electrocatalytic reactions and, on this basis, develops knowledge- and data-driven strategies to improve electrocatalysts for the sustainable production of hydrogen, fuels and chemicals.