Keywords: cooperations (139) BESSY II (269) spintronics (93) HZB own research (99)

News    15.01.2015

“VEKMAG” at BESSY II creates 3D magnetic fields in samples

A general view of the VEKMAG end-station. The vector magnet chamber (grey) is supported by a hexapod frame. Below the magnet one can distinguish the detector chamber (green) and in the forward direction the deposition chamber (dark grey) is displayed. The beam quality is monitored by a diagnostic chamber (yellow) positioned in front of the magnet chamber.
Copyright: Dr. Tino Noll

Together with HZB, teams from the Universität Regensburg, from the Freie Universität Berlin and from  the  Ruhr Universität Bochum have jointly set up a unique measurement station at BESSY II: a vector electromagnet consisting of three mutually perpendicular Helmholtz coils which enables  setting the local magnetic field at the sample position  to any orientation desired. The first measurements of magnetic materials, spin systems, and nanostructured magnetic samples are scheduled for early 2015.

“We have been working on this project for almost six years”, reports HZB physicist Dr. Florin Radu. He is coordinating the project with the three universities. The deposition chamber for the samples was designed at Freie Universität Berlin. Ruhr Universität Bochum built the detector chambers, and Universität Regensburg developed the concepts for  synchrotron beam-based ferromagnetic resonance experiments.

Rapid change of polarisation

In the meantime, Radu and his team ensured optimum characteristics of a new beamline for carrying out most sophisticated experiments: “We need an extremely stable beam, but we also want to be able to change the polarisation of the x-rays  very rapidly”, he explains. “For that reason, we developed a hexapod vacuum chamber with six moveable legs supporting a mirror. By changing the leg positions slightly, we can change the orientation of the first mirror and thereby the polarisation of the x-ray beam in just seconds – about one hundred times faster than before.” The tests show that this prototype arrangement improves the signal-to-noise ratio by a factor of more than ten.

Temperature between 1,6 K and 500 K

The new experimental station will not only facilitate many different kinds of studies, particularly in the soft X-ray region, but will also permit to carry out completely new studies that require  temperatures of 500 Kelvin right down to 1.6 Kelvin and magnetic fields as high as nine tesla. Simultaneously the  X-rays can penetrate the individual atoms and excite their outer electrons, enabling magnetic properties of the individual elements to be distinguished.

The main assets of the new VEKMAG end-station are experimental specifications that are unique in comparison with stations operating at other international facilities. In particular for element-specific and time-resolved measurements of ferromagnetic and paramagnetic resonances, as well as for spectroscopic and scattering experiments VEKMAG offers a unique sample environment. However, “VEKMAG will only attain its full potential,  once HZB has implemented a new innovative beam filling pattern  with variable pulse lengths at full photon intensities”, according to Radu, because “we can then investigate rapid spin dynamics  with sub-picosecond time resolutions.”

The VEKMAG project was funded by the German Federal Ministry for Education and Research (BMBF) through a grant of about four million Euros.

arö


           



You might also be interested in
  • <p>HZB-Teams are exploring and developing new technologies for perovskite based solar cells in the innovation lab HySPRINT.</p>NEWS      16.05.2019

    LAUNCH OF EPKI: European Perovskite Initiative for the development of Perovskite based solar technology

    Perovskite based solar cells have made tremendous progress over the last decade achieving lab-scale efficiencies of 24.2% early 2019 in single-junction architecture and up to 28% in tandem (perovskite associated with crystalline silicon), turning it into the fastest-advancing solar technology to date. With the HySPRINT project and the recruitment of highly talented young scientists, Helmholtz-Zentrum Berlin has built up a considerable research capacity in the field of perovskite materials in recent years and is participating in the European Perovskite Initiative EPKI that has now been launched. [...]


  • <p>Experiments at the femtoslicing facility of BESSY II revealed the ultrafast angular momentum flow from Gd and Fe spins to the lattice via orbital moment during demagnetization of GdFe alloy.</p>SCIENCE HIGHLIGHT      10.05.2019

    Laser-driven Spin Dynamics in Ferrimagnets: How does the Angular Momentum flow?

    When exposed to intense laser pulses, the magnetization of a material can be manipulated very fast. Fundamentally, magnetization is connected to the angular momentum of the electrons in the material. A team of researchers led by scientists from the Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy (MBI) has now been able to follow the flow of angular momentum during ultrafast optical demagnetization in a ferrimagnetic iron-gadolinium alloy at the femtoslicing facility of BESSY II. Their results are helpful to understand the fundamental processes and their speed limits. The study is published in Physical Review Letters. [...]


  • <p>A green laser pulse initially excites the electrons in the Cu<sub>2</sub>O; just fractions of a second later, a second laser pulse (UV light) probes the energy of the excited electron.</p>SCIENCE HIGHLIGHT      09.05.2019

    Copper oxide photocathodes: laser experiment reveals location of efficiency loss

    Solar cells and photocathodes made of copper oxide might in theory attain high efficiencies for solar energy conversion. In practice, however, large losses occur. Now a team at the HZB has been able to use a sophisticated femtosecond laser experiment to determine where these losses take place: not so much at the interfaces, but instead far more in the interior of the crystalline material. These results provide indications on how to improve copper oxide and other metal oxides for applications as energy materials. [...]




Newsletter