Solar based hydrogen generation: EU-project PECSYS aiming for technological breakthrough

Scientists from all participating organisations together with the project officers from FCH2 JU met in January 2017 to start off the project.

Scientists from all participating organisations together with the project officers from FCH2 JU met in January 2017 to start off the project. © J. Bierbaum/HZB

Development of demonstrators measuring up to ten square meters in area planned

The HZB is coordinating a Horizon 2020 EU project that is expected to develop an economically feasible technology for solar based hydrogen generation. Solar energy shall thereby be converted into chemical energy that can be stored as fuel by hydrogen. The project’s approach shall ensure that the levelised cost of hydrogen production remains below five Euros per kilogramme. The partners hailing from Germany, Sweden and Italy plan to ultimately build an array of modules covering ten square meters to demonstrate stable device performance on a large area. The project runs for four years and is funded with 2.5 million euros.

Currently, photovoltaics (PV) covers about 7.4 percent of the net electricity demand in Germany and on sunny weekends, this even rises to 50 percent. However, PV cannot generate electricity at night and in conditions with high cloud cover. Nevertheless, PV cells can be combined with electro-catalysts in order to split water into its constituent elements, hydrogen and water. This solar generated hydrogen thus stores solar energy in a chemical form and releases it, as required for example at night, via a fuel cell.  Although in recent years research in this area has made much progress, up till now, unlike PV, no technological scale up to large areas has been accomplished. In other words: the race is currently wide open.

Partners in Germany, Italy, Sweden

This challenge will now be addressed by the PECSYS project: the project is coordinated by the Competence Centre Thin Film and Nanotechnology for Photovoltaics Berlin (PVcomB) at the HZB and brings together expertise from the Forschungszentrum Juelich, Germany; Uppsala University, Sweden; the National Research Council of Italy and from two corporations namely, Solibro Research AB, Sweden and 3SUN, Italy.

6 percent efficiency for 6 months

Dr Sonya Calnan, the spokesperson of the project and a researcher at HZB acknowledges, “The aims of the project are ambitious and very definite”: The demonstrator system to be developed is expected to be realised on an area of at least ten square meters, to convert more than six percent of the incident solar energy into hydrogen and to maintain stable operation for at least six months. Also, the cost of the so-generated hydrogen should be less than five euro per kilogramme. For comparison: the actual market price for hydrogen is about eight euro per kilogramme.

Integrated device

At PVcomB, photovoltaic cells based on different materials such as silicon and chalcogenides, as well as tandem cells based on metal halide perovskites, together with electro-catalysts and membranes shall be tested and protective layers developed. The goal is to ultimately develop an integrated device that can stably operate under extreme environmental conditions.

Appropriate for industrial production

The participating project teams thus aim to identify a system that is most appropriate for industrial production. The demonstrator systems with a total area of ten square metres shall then be installed at either Forschungzentrum Jülich and/or at 3SUN and produce at least ten kg of hydrogen in six months.

The project has received funding from the Fuel Cells and Hydrogen 2 Joint Undertaking under grant agreement No 735218. This Joint Undertaking receives support from the European Union’s Horizon 2020 Research and Innovation programme and Hydrogen Europe and N.ERGHY.

> PECSYS Homepage

arö

You might also be interested in

  • Stability of perovskite solar cells reaches next milestone
    Science Highlight
    27.01.2023
    Stability of perovskite solar cells reaches next milestone
    Perovskite semiconductors promise highly efficient and low-cost solar cells. However, the semi-organic material is very sensitive to temperature differences, which can quickly lead to fatigue damage in normal outdoor use. Adding a dipolar polymer compound to the precursor perovskite solution helps to counteract this. This has now been shown in a study published in the journal Science by an international team led by Antonio Abate, HZB. The solar cells produced in this way achieve efficiencies of well above 24 %, which hardly drop under rapid temperature fluctuations between -60 and +80 Celsius over one hundred cycles. That corresponds to about one year of outdoor use.
  • NETZWERKTAG der Allianz für Bauwerkintegrierte Photovoltaik
    Nachricht
    24.01.2023
    NETZWERKTAG der Allianz für Bauwerkintegrierte Photovoltaik
    Der 2. Netzwerktag der Allianz BIPV findet statt am

    14.02.2023
    10:00 - ca. 16:00 Uhr

    Das HZB, Mitglied in der Allianz BIPV, freut sich, Gastgeber des branchenweiten Austausches zu sein. Neben Praxiserfahrungen von Vertretenden aus Architektur, Fassadenbau und angewandter Forschung steht der direkte Austausch und die Diskussion im Vordergrund.

  • Scientists Develop New Technique to Image Fluctuations in Materials
    Science Highlight
    18.01.2023
    Scientists Develop New Technique to Image Fluctuations in Materials
    A team of scientists, led by researchers from the Max Born Institute in Berlin and Helmholtz-Zentrum Berlin in Germany and from Brookhaven National Laboratory and the Massachusetts Institute of Technology in the United States has developed a revolutionary new method for capturing high-resolution images of fluctuations in materials at the nanoscale using powerful X-ray sources. The technique, which they call Coherent Correlation Imaging (CCI), allows for the creation of sharp, detailed movies without damaging the sample by excessive radiation. By using an algorithm to detect patterns in underexposed images, CCI opens paths to previously inaccessible information. The team demonstrated CCI on samples made of thin magnetic layers, and their results have been published in Nature.