Keywords: cooperations (139) user research (31) BESSY II (269) life sciences (60) HZB own research (99)

Science Highlight    12.04.2019

"Molecular scissors" for plastic waste

The enzyme MHETase is a huge and complex molecule. MHET-molecules from PET plastic dock at the active site inside the MHETase and are broken down into their basic building blocks.
Copyright: M. Künsting/HZB

MHETase at work: a MHET-molecule (which is a building block of PET) is broken down into the basic building blocks terephthalic acid and ethylene glycol.
Copyright: Gert Weber/HZB

At the MX-Beamlines at BESSY II, Gottfried Palm, Gert Weber and Manfred Weiss could solve the 3D structure of MHETase.
Copyright: F. Krawatzek/HZB

A research team from the University of Greifswald and Helmholtz-Zentrum-Berlin (HZB) has solved the molecular structure of the important enzyme MHETase at BESSY II. MHETase was discovered in bacteria and together with a second enzyme - PETase - is able to break down the widely used plastic PET into its basic building blocks. This 3D structure already allowed the researchers to produce a MHETase variant with optimized activity in order to use it, together with PETase, for a sustainable recycling of PET. The results have been published in the research journal Nature Communications.

Plastics are excellent materials: extremely versatile and almost eternally durable. But this is also exactly the problem, because after only about 100 years of producing plastics, plastic particles are now found everywhere – in groundwater, in the oceans, in the air, and in the food chain. Around 50 million tonnes of the industrially important polymer PET are produced every year. Just a tiny fraction of plastics is currently recycled at all by expensive and energy-consuming processes which yield either downgraded products or depend in turn on adding 'fresh' crude oil.

Bacteria on PET discovered in 2016

In 2016, a group of Japanese researchers has discovered a bacterium that grows on PET and partially feeds on it. They found out that his bacterium possesses two special enzymes, PETase and MHETase, which are able to digest PET plastic polymers. PETase breaks down the plastic into smaller PET building blocks, primarily MHET, and MHETase splits this into the two basic precursor building blocks of PET, terephthalic acid and ethylene glycol. Both components are very valuable for synthesising new PET without the addition of crude oil - for a closed sustainable production and recovery cycle.

In 2018: Structure of PETase solved

In April 2018, the structure of PETase was finally solved independently by several research groups, the Diamond Light Source was also involved in the experiments. However, PETase is only part of the solution. It is equally important to characterize the structure of the second enzyme, MHETase.

Now: 3D architecture of MHETase decoded

“MHETase is considerably larger than PETase and even more complex. A single MHETase molecule consists of 600 amino acids, or about 4000 atoms. MHETase has a surface that is about twice as large as the surface of PETase and has therefore considerably more potential to optimise it for decomposition of PET“, explains biochemist and structural biologist Dr. Gert Weber from the joint Protein Crystallography research group at the Helmholtz-Zentrum Berlin and Freie Universität Berlin. During an interim professorship at the University of Greifswald, Weber there contacted the biotechnologist Prof. Uwe Bornscheuer at the Institute of Biochemistry, who was already involved with plastic-degrading enzymes. Together, they developed the idea of solving the structure of MHETase and then using this insight to optimise the enzyme for applications in PET recycling. To do this, they first had to extract the enzyme from bacterial cells and purify it. Within this collaboration, the teams have now succeeded in obtaining the complex three-dimensional architecture of MHETase at BESSY II, the synchrotron source at HZB in Berlin.

MHETase observed "in action"

 “In order to see how MHETase binds to PET and decomposes it, you need a fragment of plastic that binds to MHETase but is not cleaved by it”, explains Weber. A member of Weber's prior research team in Greifswald, Dr. Gottfried Palm, cut up a PET bottle, chemically decomposed the PET polymer and synthesised a small chemical fragment from it that binds to MHETase but can no longer be cleaved by it. From this 'blocked' MHETase, tiny crystals were grown for structural investigations at the HZB. “The structural investigations enabled us to watch MHETase virtually ‘at work’ and develop strategies for how to optimise this enzyme”, explains Weber.

“Thanks to the joint research group format, we have the means to offer beamtime access on the highly demanded BESSY II MX beamlines for measurements very quickly at any time”, says Dr. Manfred Weiss, who is responsible for the BESSY II MX beamlines. The three-dimensional architecture of MHETase actually displays some special features: enzymes such as MHETase bind to their target molecule first before a chemical reaction occurs. For breakdown of a molecule you need a tailor-made enzyme: “We can now exactly localise where the MHET molecule docks to MHETase and how MHET is then split into its two building blocks terephthalic acid and ethylene glycol”, says Weber.

Next steps: Increasing the efficiency

However, neither PETase nor MHETase are particularly efficient yet. ”Plastics have only been around on this scale for a few decades – even bacteria with their rapid successions of generations and rapid adaptability have not managed to develop a perfect solution through the evolutionary process of trial and error over such a short time”, explains Weber. "Thanks to the clarification of the structure of this very important enzyme, we have now also been able to plan, produce and biochemically characterise variants that show significantly higher activity than natural MHETase and are even active against another intermediate product of PET degradation, BHET," adds Uwe Bornscheuer.

In future, Uwe Bornscheuer will work on systematically optimising the enzymes PETase and MHETase for their task - the decomposition of PET. Gert Weber plans to supplement these studies with further work on biological structures in order to systematically develop plastic-digesting enzymes for environmental applications. Access to the measuring stations and the IT infrastructure of HZB is indispensable for this.

Outlook: perfect recycling

Producing these kinds of enzymes in closed biotechnological cycles, for example, could be a way to really break down PET plastics and other polymers into their basic building blocks. This would also be the key to ideal recycling and a long-term solution to the plastic waste problem: production of plastic would be a closed cycle and no longer dependent on crude oil.

 

Published in Nature Communications (2019): "Structure of the plastic-degrading Ideonella sakaiensis MHETase bound to a substrate"; G.J. Palm, L. Reisky, D. Böttcher, H. Müller, E.A.P. Michels, C. Walczak, L. Berndt, M.S. Weiss, U.T. Bornscheuer and G. Weber

DOI: 10.1038/s41467-019-09326-3

arö


           



You might also be interested in
  • <p>HZB-Teams are exploring and developing new technologies for perovskite based solar cells in the innovation lab HySPRINT.</p>NEWS      16.05.2019

    LAUNCH OF EPKI: European Perovskite Initiative for the development of Perovskite based solar technology

    Perovskite based solar cells have made tremendous progress over the last decade achieving lab-scale efficiencies of 24.2% early 2019 in single-junction architecture and up to 28% in tandem (perovskite associated with crystalline silicon), turning it into the fastest-advancing solar technology to date. With the HySPRINT project and the recruitment of highly talented young scientists, Helmholtz-Zentrum Berlin has built up a considerable research capacity in the field of perovskite materials in recent years and is participating in the European Perovskite Initiative EPKI that has now been launched. [...]


  • <p>Experiments at the femtoslicing facility of BESSY II revealed the ultrafast angular momentum flow from Gd and Fe spins to the lattice via orbital moment during demagnetization of GdFe alloy.</p>SCIENCE HIGHLIGHT      10.05.2019

    Laser-driven Spin Dynamics in Ferrimagnets: How does the Angular Momentum flow?

    When exposed to intense laser pulses, the magnetization of a material can be manipulated very fast. Fundamentally, magnetization is connected to the angular momentum of the electrons in the material. A team of researchers led by scientists from the Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy (MBI) has now been able to follow the flow of angular momentum during ultrafast optical demagnetization in a ferrimagnetic iron-gadolinium alloy at the femtoslicing facility of BESSY II. Their results are helpful to understand the fundamental processes and their speed limits. The study is published in Physical Review Letters. [...]


  • <p>A green laser pulse initially excites the electrons in the Cu<sub>2</sub>O; just fractions of a second later, a second laser pulse (UV light) probes the energy of the excited electron.</p>SCIENCE HIGHLIGHT      09.05.2019

    Copper oxide photocathodes: laser experiment reveals location of efficiency loss

    Solar cells and photocathodes made of copper oxide might in theory attain high efficiencies for solar energy conversion. In practice, however, large losses occur. Now a team at the HZB has been able to use a sophisticated femtosecond laser experiment to determine where these losses take place: not so much at the interfaces, but instead far more in the interior of the crystalline material. These results provide indications on how to improve copper oxide and other metal oxides for applications as energy materials. [...]




Newsletter