Keywords: energy (315) materials research (69) BESSY II (269) HZB own research (101)

Science Highlight    24.04.2019

High-efficiency thermoelectric materials: new insights into tin selenide

SnSe is a highly layered orthorhombic structure. SnSe undergoes a phase transition of second order at 500°C with an increase of the crystal symmetry from space group Pnma (left) to Cmcm (right).
Copyright: HZB

Tin selenide might considerably exceed the efficiency of current record holding thermoelectric materials made of bismuth telluride. However, it was thought its efficiency became enormous only at temperatures above 500 degrees Celsius. Now measurements at the BESSY II and PETRA III synchrotron sources show that tin selenide can also be utilised as a thermoelectric material at room temperature – so long as high pressure is applied.

The thermoelectric effect has been known since 1821: with certain combinations of materials, a temperature difference generates an electric current. If one end of the sample is heated, for example using waste heat from a combustion engine, then part of this otherwise lost energy can be converted into electrical energy. However, the thermoelectric effect in most materials is extremely small. This is because to achieve a large thermoelectric effect, heat conduction must be poor, whereas electrical conductivity must be high. However, heat conduction and electrical conductivity are almost always closely associated.

For this reason, the search for thermoelectric materials concentrates on compounds with special crystalline structures such as bismuth telluride (Bi2Te3). Bismuth telluride is one of the best thermoelectric materials known to date. However, both bismuth and tellurium are rare elements, which limit their large-scale use. So the search continues for suitable thermoelectric materials among more abundant non-toxic elements.

Six years ago, a research team from the USA ( discovered that tin selenide above 500 degrees Celsius can convert about 20 per cent of heat into electrical energy. This is an enormous efficiency and considerably exceeds the value for bismuth telluride. In addition, tin and selenium are abundant.

This extremely large thermoelectric effect is related to a phase transition or re-arrangement of the crystal structure of tin selenide. The crystal structure of tin selenide consists of many layers, similar to filo or puff pastry. At 500 degrees Celsius, the layers start to self-organise and the heat conduction decreases, while charge carriers remain mobile. The efficiency of the thermoelectric effect in this crystallographic orientation of tin selenide has not been exceeded by any other material to date.

High pressure works

An international team led by Dr. Ulrich Schade at the HZB has now comprehensively examined samples of tin selenide with the aid of infrared spectroscopy at BESSY II and hard X-rays at PETRA III. The measurements show that the desired crystal structure is produced by either high temperature at normal pressure or high pressure (above 10 GPa) at room temperature. The electronic properties also change from semiconducting to semi-metallic in the high-temperature structure. This fits the predictions from theoretical calculations of the model and also from band-structure calculations.

“We are able to explain with our data and our calculations why tin selenide is such an outstanding thermoelectric material over a wide temperature and pressure range”, says Schade. Further development work will be necessary to guarantee long-term stability, for example, before thermoelectrical devices based on tin selenide really come onto the market, though. Then tin selenide might become an economical and readily available alternative to bismuth telluride.

Published in Physical Chemistry Chemical Physics (2019):

“Effects of temperature and pressure on the optical and vibrational properties of thermoelectric SnSe.” Ilias Efthimiopoulos, Matthias Berg, Annika Bande, Ljiljana Puskar, Eglof Ritter, Wei Xu, Augusto Marcelli, Michele Ortolani, Martin Harms, Jan Mueller, Sergio Speziale, Monika Koch-Mueller, Yong Liu, Li-Dong Zhao, and Ulrich Schade.                                                         

DOI: 10.1039/C9CP00897G




You might also be interested in
  • NEWS      05.06.2019

    Photovoltaics are growing faster than expected in the global energy system

    Dramatic cost reductions and the rapid expansion of production capacities make photovoltaics one of the most attractive technologies for a global energy turnaround. Not only the electricity sector, but also transport, heating, industry and chemical processes will in future be supplied primarily by solar power, because it is already the cheapest form of electricity generation in large parts of the world. This is where opportunities and challenges lie - at the level of the energy system as well as for research and industry. Leading international photovoltaic researchers from the Global Alliance for Solar Energy Research Institutes describe the cornerstones of future developments in an article published in the journal "Science" on 31 May. [...]

  • <p>The illustration is alluding to the laser experiment in the background and shows the structure of TGCN.</p>SCIENCE HIGHLIGHT      05.06.2019

    Organic electronics: a new semiconductor in the carbon-nitride family

    Teams from Humboldt-Universität and the Helmholtz-Zentrum Berlin have explored a new material in the carbon-nitride family. Triazine-based graphitic carbon nitride (TGCN) is a semiconductor that should be highly suitable for applications in optoelectronics. Its structure is two-dimensional and reminiscent of graphene. Unlike graphene, however, the conductivity in the direction perpendicular to its 2D planes is 65 times higher than along the planes themselves. [...]