CIGSe thin-film solar cells: EU Sharc25 project increases efficiency
Research on the EU project Sharc25 also took place in the EMIL laboratory, where thin films and materials can be analysed with X-rays from BESSY II. © Ingo Kniest/HZB
Thin-film solar cells made of copper, indium, gallium, and selenium (CIGSe) are cost-effective to produce and now achieve efficiencies of significantly more than 20 percent. This level of performance was achieved through post-processing with alkali elements, and the procedures are suitable for industrial-scale production. Insights into the beneficial effect of these alkali treatments from the EU Sharc25 project have now been collected in an article published in Advanced Energy Materials.
Producing thin-film solar modules requires much less energy than conventional wafer-based Si PV modules, and therefore their energy payback time is much shorter. Chalcopyrite-structured compounds of copper, indium, gallium, and selenium (CIGSe) are an important class of materials for thin-film PV, because CIGSe absorbs incident light much better than silicon, and so a very thin layer grown on a substrate via coevaporation suffices to convert light into electrical energy efficiently.
Efficiency up to 22,6 percent
The European Sharc25 research project approached the challenge of optimizing the conversion efficiency of CIGSe thin film technology from multiple angles, combining theoretical modelling, experimental characterization, and sharing of technological expertise between several leading research groups throughout Europe. During the project, the efficiency of CIGSe solar cells produced within the consortium rose from 21.7 to 22.6 percent.
One focus of the project was to understand the positive effects of post-processing with the alkali elements potassium, rubidium, and cesium. This post-processing changes the chemical and electronic surface properties of the CIGSe absorber. In addition, the alkali atoms migrate from the surface into the grain boundaries between the CIGSe grains, which improves the electronic properties of the thin film. The recombination of charge carriers in the bulk CIGSe is reduced, among other effects. This beneficial effect is observed for CIGSe layers prepared at various temperatures and on different substrates.
Know-how for european industries
Eleven research institutions from eight countries, including an HZB team headed by Prof. Marcus Bär, collaborated on the EU Sharc25 project. An important goal was to secure Europe‘s pioneering role in the field of thin-film PV. “It is certainly a competitive advantage to be able to address questions related to applied materials research and to the development of industry-oriented devices using advanced research tools. To do so efficiently, we learn in such large EU projects. This represents a significant advantage and preserves the crucial edge in knowledge and know-how“, says Bär.
Partners: EMPA (CH), the Universities of Luxembourg (LU), Rouen (F), Parma (I), and Aalto (FIN), IMEC (B), HZB (D), INL (P), Flisom AG (CH), and Manz CIGS Technology GmbH (D). The Centre for Solar Energy and Hydrogen Research Baden-Württemberg (ZSW) coordinated the project.
The study has been published in Adv. Energy Materials (2020): Heavy alkali treatment of Cu(In,Ga)Se2 solar cells: Surface versus bulk effects
DOI: 10.1002/aenm.201903752
http://sharc25.eu/ has received funding from the European Union’s Horizon 2020 Framework Programme for Research and Innovation under grant agreement No 64100.
- How carbonates influence CO2-to-fuel conversionResearchers from the Helmholtz Zentrum Berlin (HZB) and the Fritz Haber Institute of the Max Planck Society (FHI) have uncovered how carbonate molecules affect the conversion of CO2 into valuable fuels on gold electrocatalysts. Their findings reveal key molecular mechanisms in CO2 electrocatalysis and hydrogen evolution, pointing to new strategies for improving energy efficiency and reaction selectivity.
- Peat as a sustainable precursor for fuel cell catalyst materialsIron-nitrogen-carbon catalysts have the potential to replace the more expensive platinum catalysts currently used in fuel cells. This is shown by a study conducted by researchers from the Helmholtz-Zentrum Berlin (HZB), Physikalisch-Technische Bundesanstalt (PTB) and universities in Tartu and Tallinn, Estonia. At BESSY II, the team observed the formation of complex microstructures within various samples. They then analysed which structural parameters were particularly important for fostering the preferred electrochemical reactions. The raw material for such catalysts is well decomposed peat.
- Susanne Nies appointed to EU advisory group on Green DealDr. Susanne Nies heads the Green Deal Ukraina project at HZB, which aims to support the development of a sustainable energy system in Ukraine. The energy expert has now also been appointed to the European Commission's scientific advisory group to comment on regulatory burdens in connection with the net-zero target (DG GROW).