Record-breaking tandem solar cell now with precise scientific explanations

Photo of the perovskite/silicon tandem solar cell. The active area in the middle of the wafer is enclosed by the silver electrode.

Photo of the perovskite/silicon tandem solar cell. The active area in the middle of the wafer is enclosed by the silver electrode. © Johannes Beckedahl/ Lea Zimmermann / HZB

The world's best tandem solar cells, consisting of a silicon bottom cell and a perovskite top cell, can today convert around one-third of incident solar radiation into electrical energy. These are record values, especially for a potentially very low-cost technology. A team at HZB is now providing the scientific data for the first time and describing how this development was achieved in the renowned journal Science. 

“This achievement was possible because we at HZB have built up expertise in both silicon heterojunction technology and perovskite solar cells and work very closely together,” says Prof. Dr. Steve Albrecht. He leads a research group on perovskite tandem solar cells at HZB Berlin. For example, the perovskite experts from the HySPRINT Innovation Lab and the silicon experts from the PV Competence Centre (PVcomB) have already set several efficiency world records for tandem solar cells.

The tandem solar cell, now described in detail for the first time in the journal Science, also made headlines in December 2022. It set a new world record for efficiency, converting 32.5% of incident sunlight into electrical energy. This world record stood until mid-April 2023, when it was broken by a group from the PV Lab at the KAUST research centre in Saudi Arabia. The research field is extremely competitive, with many groups worldwide working in this area. Now the HZB team has again been the first to present a solid and scientifically rigorous peer-reviewed technical publication. Publishing precise data sets from the measurements as well as detailed information on the structure of the tandem cell.

World record efficiency with perovskite tandem solar cells

Albrecht and his team relied primarily on a significantly improved perovskite compound and a sophisticated surface modification using a novel piperazinium iodide molecule. It was developed by postdoctoral researchers Dr Silvia Mariotti and Dr Eike Köhnen. This largely suppressed charge recombination and significantly reduced the associated losses. Using special measurement techniques, the researchers were able to analyse the fundamental processes at the interfaces and in the individual layers of the tandem cell in detail. Then the were able to further optimise them based on a deeper understanding. The developments were then combined and transferred to tandem solar cells, with further adjustments to the top electrode for improved optics.

Many experts from different institutes were involved in the production and development of the tandem cells. For example, a group from the University of Potsdam carried out advanced optoelectronic measurements of the single and tandem cells. The novel molecules for modifying the surface were synthesised at the Joxe Mari Korta Centre in San Sebastian, Spain. A team from Kaunas Technical University in Lithuania helped processing the new perovskite compounds with very high film quality. Only by combining all the modifications was it possible to achieve maximum values for photovoltage (open circuit voltage) and photocurrent, and thus efficiency.

Impressive development in recent years

Over the past few years, various research institutes and photovoltaic companies around the world have been continuously improving the efficiency of solar cells. The last two years in particular have been very exciting. Teams from the HZB achieved a record value of just under 30% (29.8%) for tandem solar cells made of silicon and perovskite at the end of 2021. This was achieved by introducing special periodic nanostructures into the solar cells. In the summer of 2022, the Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland reported a certified tandem cell with 31.3% efficiency. From December 2022 to mid-April 2023, the world record was back at HZB with 32.5%, until the KAUST Photovoltaics Laboratory in Saudi Arabia demonstrated a perovskite silicon tandem cell with 33.2% in the laboratory. KAUST even managed to increase this to 33.7% in May 2023.  Albrecht says: “We are very excited about these tremendous advances in our scientific discipline. They give us hope that this technology can make an important contribution to a sustainable energy supply in the fight against climate change in the coming years, because the upscaling and industrial production of perovskite/silicon tandem solar cells is also feasible”.

HZB’s scientific director, Prof. Bernd Rech, says: “The solar cell efficiency of silicon/perovskite tandem cells is now in the range previously only achieved by expensive III/V semiconductors.” The technologies for manufacturing such tandem solar cells are already available in principle and potentially low cost. The focus now is on further improvements in the area of stability in outdoor use.


You might also be interested in

  • Chilean President visits Helmholtz-Zentrum Berlin
    Chilean President visits Helmholtz-Zentrum Berlin
    The President of Chile, Gabriel Boric Font, visited HZB on Tuesday with a delegation of 50 people. Among the highlights of the evening were the signing of a Memorandum of Understanding between the Chilean Corporation for the Promotion of Production (CORFO) and HZB and a visit to BESSY II light source.
  • Key role of nickel ions in the Simons process discovered
    Science Highlight
    Key role of nickel ions in the Simons process discovered
    Researchers at the Federal Institute for Materials Research and Testing (BAM) and Freie Universität Berlin have discovered the exact mechanism of the Simons process for the first time. The interdisciplinary research team used the BESSY II light source at the Helmholtz Zentrum Berlin for this study.

  • Watching indium phosphide at work
    Science Highlight
    Watching indium phosphide at work
    Indium phosphide is a versatile semiconductor. The material can be used for solar cells, for hydrogen production and even for quantum computers – and with record-breaking efficiency. However, little research has been conducted into what happens on its surface. Researchers have now closed this gap and used ultra-fast lasers to scrutinise the dynamics of the electrons in the material.