Record-breaking tandem solar cell now with precise scientific explanations

Photo of the perovskite/silicon tandem solar cell. The active area in the middle of the wafer is enclosed by the silver electrode.

Photo of the perovskite/silicon tandem solar cell. The active area in the middle of the wafer is enclosed by the silver electrode. © Johannes Beckedahl/ Lea Zimmermann / HZB

The world's best tandem solar cells, consisting of a silicon bottom cell and a perovskite top cell, can today convert around one-third of incident solar radiation into electrical energy. These are record values, especially for a potentially very low-cost technology. A team at HZB is now providing the scientific data for the first time and describing how this development was achieved in the renowned journal Science. 

“This achievement was possible because we at HZB have built up expertise in both silicon heterojunction technology and perovskite solar cells and work very closely together,” says Prof. Dr. Steve Albrecht. He leads a research group on perovskite tandem solar cells at HZB Berlin. For example, the perovskite experts from the HySPRINT Innovation Lab and the silicon experts from the PV Competence Centre (PVcomB) have already set several efficiency world records for tandem solar cells.

The tandem solar cell, now described in detail for the first time in the journal Science, also made headlines in December 2022. It set a new world record for efficiency, converting 32.5% of incident sunlight into electrical energy. This world record stood until mid-April 2023, when it was broken by a group from the PV Lab at the KAUST research centre in Saudi Arabia. The research field is extremely competitive, with many groups worldwide working in this area. Now the HZB team has again been the first to present a solid and scientifically rigorous peer-reviewed technical publication. Publishing precise data sets from the measurements as well as detailed information on the structure of the tandem cell.

World record efficiency with perovskite tandem solar cells

Albrecht and his team relied primarily on a significantly improved perovskite compound and a sophisticated surface modification using a novel piperazinium iodide molecule. It was developed by postdoctoral researchers Dr Silvia Mariotti and Dr Eike Köhnen. This largely suppressed charge recombination and significantly reduced the associated losses. Using special measurement techniques, the researchers were able to analyse the fundamental processes at the interfaces and in the individual layers of the tandem cell in detail. Then the were able to further optimise them based on a deeper understanding. The developments were then combined and transferred to tandem solar cells, with further adjustments to the top electrode for improved optics.

Many experts from different institutes were involved in the production and development of the tandem cells. For example, a group from the University of Potsdam carried out advanced optoelectronic measurements of the single and tandem cells. The novel molecules for modifying the surface were synthesised at the Joxe Mari Korta Centre in San Sebastian, Spain. A team from Kaunas Technical University in Lithuania helped processing the new perovskite compounds with very high film quality. Only by combining all the modifications was it possible to achieve maximum values for photovoltage (open circuit voltage) and photocurrent, and thus efficiency.

Impressive development in recent years

Over the past few years, various research institutes and photovoltaic companies around the world have been continuously improving the efficiency of solar cells. The last two years in particular have been very exciting. Teams from the HZB achieved a record value of just under 30% (29.8%) for tandem solar cells made of silicon and perovskite at the end of 2021. This was achieved by introducing special periodic nanostructures into the solar cells. In the summer of 2022, the Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland reported a certified tandem cell with 31.3% efficiency. From December 2022 to mid-April 2023, the world record was back at HZB with 32.5%, until the KAUST Photovoltaics Laboratory in Saudi Arabia demonstrated a perovskite silicon tandem cell with 33.2% in the laboratory. KAUST even managed to increase this to 33.7% in May 2023.  Albrecht says: “We are very excited about these tremendous advances in our scientific discipline. They give us hope that this technology can make an important contribution to a sustainable energy supply in the fight against climate change in the coming years, because the upscaling and industrial production of perovskite/silicon tandem solar cells is also feasible”.

HZB’s scientific director, Prof. Bernd Rech, says: “The solar cell efficiency of silicon/perovskite tandem cells is now in the range previously only achieved by expensive III/V semiconductors.” The technologies for manufacturing such tandem solar cells are already available in principle and potentially low cost. The focus now is on further improvements in the area of stability in outdoor use.

arö


You might also be interested in

  • BESSY II: How pulsed charging enhances the service time of batteries
    Science Highlight
    08.04.2024
    BESSY II: How pulsed charging enhances the service time of batteries
    An improved charging protocol might help lithium-ion batteries to last much longer. Charging with a high-frequency pulsed current reduces ageing effects, an international team demonstrated. The study was led by Philipp Adelhelm (HZB and Humboldt University) in collaboration with teams from the Technical University of Berlin and Aalborg University in Denmark. Experiments at the X-ray source BESSY II were particularly revealing.
  • Fuel Cells: Oxidation processes of phosphoric acid revealed by tender X-rays
    Science Highlight
    03.04.2024
    Fuel Cells: Oxidation processes of phosphoric acid revealed by tender X-rays
    The interactions between phosphoric acid and the platinum catalyst in high-temperature PEM fuel cells are more complex than previously assumed. Experiments at BESSY II with tender X-rays have decoded the multiple oxidation processes at the platinum-electrolyte interface. The results indicate that variations in humidity can influence some of these processes in order to increase the lifetime and efficiency of fuel cells. 
  • Best Innovator Award 2023 for Artem Musiienko
    News
    22.03.2024
    Best Innovator Award 2023 for Artem Musiienko
    Dr. Artem Musiienko has been awarded a special prize for his groundbreaking new method for characterising semiconductors. At the recent annual conference of the Marie Curie Alumni Association (MCAA) in Milan, Italy, he received the MCAA Award for the best innovation. Since 2023, Musiienko has been carrying out his research project with a postdoctoral fellowship from the Marie Sklodowska Curie Actions in Antonio Abate's department, Novel Materials and Interfaces for Photovoltaic Solar Cells (SE-AMIP).