Sodium-ion batteries: New storage mechanism for cathode materials

The image illustrates a layered structure composed of transition metals (blue) and sulfur (yellow). The space between the layers can be occupied by sodium ions (purple) and organic solvent molecules (red, brown) through a process called co-intercalation.

The image illustrates a layered structure composed of transition metals (blue) and sulfur (yellow). The space between the layers can be occupied by sodium ions (purple) and organic solvent molecules (red, brown) through a process called co-intercalation. © Y. Sun et al., Nature Materials 2025

Li-ion and Na-ion batteries operate through a process called intercalation, where ions are stored and exchanged between two chemically different electrodes. In contrast, co-intercalation, a process in which both ions and solvent molecules are stored simultaneously, has traditionally been considered undesirable due to its tendency to cause rapid battery failure. Against this traditional view, an international research team led by Philipp Adelhelm has now demonstrated that co-intercalation can be a reversible and fast process for cathode materials in Na-ion batteries. The approach of jointly storing ions and solvents in cathode materials provides a new handle for designing batteries with high efficiency and fast charging capabilities. The results are published in Nature Materials.

The performance of batteries depends on many factors. In particular, it depends on how ions are stored in electrode materials and whether they can be released again. This is because the charge carriers (ions) are relatively large and can cause an undesirable change in volume when they migrate into the electrode. This effect, known as 'breathing', impairs the battery's service life. The volume change is particularly pronounced when sodium ions migrate together with molecules from the organic electrolyte. This so-called co-intercalation has generally been considered detrimental to battery life. However, an international research team led by Philipp Adelhelm has now investigated cathode materials that enable the co-intercalation of ions and solvent molecules, allowing for faster charging and discharging processes.

Co-intercalation in anodes

In earlier studies, the team investigated co-intercalation in graphite anodes, demonstrating that sodium could migrate quickly and reversibly into and out of the electrolyte over many cycles when combined with glyme molecules. Nevertheless, proofing the same concept for cathode materials remained difficult. To tackle this challenge, the team explored a range of layered transition metal sulfides and identified solvent co-intercalation processes in cathode materials. ‘The process of co-intercalation could be used for developing very efficient and faster-charging batteries. This is why we wanted to investigate this topic in more detail,’ says Prof. Philipp Adelhelm.

Co-intercalation in cathodes: a different process

The study incorporates detailed investigations from the last three years: Dr. Yanan Sun carried out volume change measurements in the cathode materials, performed structural analyses with synchrotron radiation at PETRA III at DESY, and investigated the electrochemical properties for a variety of combinations of electrodes and solvents. By support from theory, in collaboration with Dr. Gustav Åvall, important parameters could be identified that help predicting co-intercalation reactions in the future.

Advantage: Super-fast kinetics

‘The co-intercalation process in cathode materials differs significantly from what happens in graphite anodes,’ explains Yanan Sun. While co-intercalation reactions in graphite anodes typically result in low-capacity electrodes, the loss of capacity caused by co-intercalation in the investigated cathode materials is very low. ‘Above all, certain cathode materials offer a huge advantage: the kinetics are super-fast, almost like a supercapacitor!’ Sun emphasises.

Vast chemical landscape for novel materials

'The true beauty of co-intercalation reactions lies in their ability to offer a vast chemical landscape for designing novel layered materials for diverse applications.’ says Adelhelm. ‘Exploring the concept of co-intercalation was extremely risky because it is against classical battery knowledge. I was therefore very grateful to receive funding for this idea from the European Research Council through an ERC Consolidator Grant. The findings are the result of a collaborative effort from many talented people and would not have been possible without the opportunities provided by the joint research group on operando battery analysis financed by Helmholtz-Zentrum Berlin and Humboldt-University,’ he adds. ‘The recently announced Berlin Battery Lab between HZB, HU and BAM will provide even more opportunities for joint research projects in Berlin.‘

arö

  • Copy link

You might also be interested in

  • Scrolls from Buddhist shrine virtually unrolled at BESSY II
    Science Highlight
    23.07.2025
    Scrolls from Buddhist shrine virtually unrolled at BESSY II
    The Mongolian collection of the Ethnological Museum of the National Museums in Berlin contains a unique Gungervaa shrine. Among the objects found inside were three tiny scrolls, wrapped in silk. Using 3D X-ray tomography, a team at HZB was able to create a digital copy of one of the scrolls. Using a mathematical method the scroll could be virtually unrolled to reveal the scripture on the strip. This method is also used in battery research.
  • Long-term test shows: Efficiency of perovskite cells varies with the season
    Science Highlight
    21.07.2025
    Long-term test shows: Efficiency of perovskite cells varies with the season
    Scientists at HZB run a long-term experiment on the roof of a building at the Adlershof campus. They expose a wide variety of solar cells to the weather conditions, recording their performance over a period of years. These include perovskite solar cells, a new photovoltaic material offering high efficiency and low manufacturing costs. Dr Carolin Ulbrich and Dr Mark Khenkin evaluated four years of data and presented their findings in Advanced Energy Materials. This is the longest series of measurements on perovskite cells in outdoor use to date. The scientists found that standard perovskite solar cells perform very well during the summer months, even over several years, but decline in efficiency during the darker months.
  • 10 million euros in funding for UNITE – Startup Factory Berlin-Brandenburg
    News
    16.07.2025
    10 million euros in funding for UNITE – Startup Factory Berlin-Brandenburg
    UNITE – Startup Factory Berlin-Brandenburg has been recognised by the Federal Ministry for Economic Affairs and Energy as one of ten nationwide flagship projects for science-based start-ups. UNITE is to be established as a central transfer platform for technology-driven spin-offs from science and industry in the capital region. The Helmholtz Centre Berlin will also benefit from this.