Luminescent nano-architectures of gallium arsenide

The GaAs nanocrystal has been deposited on top of a silicon germanium needle, as shown by this SEM-image. The rhombic facets have been colored artificially.

The GaAs nanocrystal has been deposited on top of a silicon germanium needle, as shown by this SEM-image. The rhombic facets have been colored artificially. © S. Schmitt/HZB

Intensity distribution of the six optical modes in the rhombic-dodecahedron is shown along two rectangular cross sectional planes.

Intensity distribution of the six optical modes in the rhombic-dodecahedron is shown along two rectangular cross sectional planes. © HZB

A team at the HZB has succeeded in growing nanocrystals of gallium arsenide on tiny columns of silicon and germanium. This enables extremely efficient optoelectronic components for important frequency ranges to be realised on silicon chips.

Gallium arsenide semiconductors have better optoelectronic properties compared to silicon. Those properties can be controlled and altered by specific nanostructures.  Dr. Sebastian Schmitt, Prof. Silke Christiansen and their collaborators have succeeded to obtain such a nanostructure on a silicon wafer covered with a thin, surprisingly crystalline layer of germanium. Colleagues from Australia had produced the high-quality wafer and sent it to HZB. The thin film of germanium facilitates the growth of gallium arsenide crystals because the lattice constants of germanium and gallium arsenide are almost identical.

They etched deep trenches in these wafers at intervals of a few micrometers until only a series of fine silicon columns topped with germanium remained on the substrate. Gallium arsenide was then deposited using metal organic vapor phase epitaxy (MOVPE). In this way, both gallium and arsenic atoms were systematically deposited on each germanium-capped silicon tower, forming a tiny, almost-perfect crystal. “The germanium acts like a crystallisation nucleus”, explains Schmitt who is the author of the study published in Advanced Optical Materials.

The nano-architecture looks spectacular under the electron microscope. At first glance, it seems as if you can see a cube on the tip of each silicon needle. At second glance, it becomes apparent that it is actually a rhombic dodecahedron – with each of the twelve surfaces an identical rhombus.

This nano-structure exhibits unusually high optical emission after excitation with a laser, especially in the near-infrared region. “As the GaAs crystals grow, germanium atoms also become incorporated into the crystal lattice”, explains Schmitt. This incorporation of germanium leads to additional discrete energy levels for charge carriers that emit light when falling back to their original levels. The light is then amplified by means of optical resonances in the highly symmetrical nanocrystal, and the frequency of these resonances can be controlled by size and geometry of the crystals. A large number of these so-called photonic resonances could be detected in the experiment that also agree well with numerical calculations.

“Because the optical and electronic properties of semiconductors can be strongly modified by nanostructuring, such nano-architectures are well suited for developing novel sensors, light-emitting diodes, and solar cells”, says Schmitt.

Published in Advanced Optical Materials (2018):"Germanium template assisted integration of gallium arsenide nanocrystals on silicon: a versatile platform for modern optoelectronic materials"; S. W. Schmitt, G. Sarau, C. Speich,G. H. Döhler, Z. Liu, X. Hao, S. Rechberger, C. Dieker, E. Spiecker, W. Prost, F. J. Tegude, G. Conibeer, M. A. Green and S. H. Christiansen.

Doi: 10.1002/adom.201701329

arö

  • Copy link

You might also be interested in

  • Lithium-sulphur pouch cells investigated at BESSY II
    Science Highlight
    08.01.2025
    Lithium-sulphur pouch cells investigated at BESSY II
    A team from HZB and the Fraunhofer Institute for Material and Beam Technology (IWS) in Dresden has gained new insights into lithium-sulphur pouch cells at the BAMline of BESSY II. Supplemented by analyses in the HZB imaging laboratory and further measurements, a new picture emerges of processes that limit the performance and lifespan of this industrially relevant battery type. The study has been published in the prestigious journal Advanced Energy Materials.
  • Less is more: Why an economical Iridium catalyst works so well
    Science Highlight
    05.12.2024
    Less is more: Why an economical Iridium catalyst works so well
    Iridium-based catalysts are needed to produce hydrogen using water electrolysis. Now, a team at HZB has shown that the newly developed P2X catalyst, which requires only a quarter of the Iridium, is as efficient and stable over time as the best commercial catalyst. Measurements at BESSY II have now revealed how the special chemical environment in the P2X catalyst during electrolysis promotes the oxygen evolution reaction during water splitting.
  • BESSY II: Heterostructures for Spintronics
    Science Highlight
    20.09.2024
    BESSY II: Heterostructures for Spintronics
    Spintronic devices work with spin textures caused by quantum-physical interactions. A Spanish-German collaboration has now studied graphene-cobalt-iridium heterostructures at BESSY II. The results show how two desired quantum-physical effects reinforce each other in these heterostructures. This could lead to new spintronic devices based on these materials.