Perovskite Solar Cells: paving the way for rational ink design for industrial-scale manufacturing

Schematic illustration: the solvants (ink) are used to produce a thin film of polycrystalline perovskite. 

Schematic illustration: the solvants (ink) are used to produce a thin film of polycrystalline perovskite.  © HZB

For the production of high-quality metal-halide perovskite thin-films for large area photovoltaic modules often optimized inks are used which contain a mixture of solvents. An HZB team at BESSY II has now analysed the crystallisation processes within such mixtures. A model has also been developed to assess the kinetics of the crystallisation processes for different solvent mixtures. The results are of high importance for the further development of perovskite inks for industrial-scale deposition processes of these semiconductors.

Hybrid organic perovskite semiconductors are a class of materials for solar cells, which promise high efficiencies at low costs. They can be processed from precursor solutions that upon evaporation on a substrate form a polycrystalline thin film. Simple manufacturing processes, such as spin coating a precursor solution, often only lead to good results on a laboratory scale, i.e. for very small samples.

Printing large areas

For the production of larger area photovoltaic modules, the team of Dr. Eva Unger develops printing and coating processes in which the perovskite semiconductor is processed from inks containing the precursors dissolved in solvents.  The composition of the ink determines the material formation mechanism with the solvent affecting the process by its rheological properties, evaporation rate and participation in intermediate phases. "Our research question in this project was: How can we rationalize the difference in crystallization kinetics when using different solvents," explains Unger, who heads the Young Investigator Group Hybrid Materials Formation and Scaling.

Different evaporation rates

In solvents with only one component, the crystallization process is determined by the evaporation rate. "In mixtures of solvents, evaporation is dominated by the most volatile component that evaporates the fastest. This changes the ratio of solvents that are present upon crystallization", says Dr. Oleksandra Shargaieva, postdoc in Unger's team. 

Crystallization analyzed at BESSY II

At the KMC-2 beamline of BESSY II, she was able to analyse the formation of the perovskite semiconductor and crystalline intermediate phases incorporating solvent molecules during the evaporation of the solvents. “I found that the formation mechanism critically depends both on the solvents evaporation rate and binding strength to the lead-halide. “These insights will help to predict the kinetics of crystallization processes of the perovskite thin film for different solvent combinations based on the properties of the precursor solutions”, says Shargaieva.

"There is still a lack of systematic knowledge when scaling up from laboratory scale to industrial area sizes. With these results we pave the way for further ink design to enable industrial-scale manufacturing or perovskite thin films of high quality”, says Unger.


You might also be interested in

  • Stability of perovskite solar cells reaches next milestone
    Science Highlight
    Stability of perovskite solar cells reaches next milestone
    Perovskite semiconductors promise highly efficient and low-cost solar cells. However, the semi-organic material is very sensitive to temperature differences, which can quickly lead to fatigue damage in normal outdoor use. Adding a dipolar polymer compound to the precursor perovskite solution helps to counteract this. This has now been shown in a study published in the journal Science by an international team led by Antonio Abate, HZB. The solar cells produced in this way achieve efficiencies of well above 24 %, which hardly drop under rapid temperature fluctuations between -60 and +80 Celsius over one hundred cycles. That corresponds to about one year of outdoor use.
  • HZB physicist appointed to Gangneung-Wonju National University, South Korea
    HZB physicist appointed to Gangneung-Wonju National University, South Korea
    Since 2016, accelerator physicist Ji-Gwang Hwang has been working at HZB in the department of storage rings and beam physics. He has made important contributions to beam diagnostics in several projects at HZB. He is now returning to his home country, South Korea, having accepted a professorship in physics at Gangneung-Wonju National University.
  • NETZWERKTAG der Allianz für Bauwerkintegrierte Photovoltaik
    NETZWERKTAG der Allianz für Bauwerkintegrierte Photovoltaik
    Der 2. Netzwerktag der Allianz BIPV findet statt am

    10:00 - ca. 16:00 Uhr

    Das HZB, Mitglied in der Allianz BIPV, freut sich, Gastgeber des branchenweiten Austausches zu sein. Neben Praxiserfahrungen von Vertretenden aus Architektur, Fassadenbau und angewandter Forschung steht der direkte Austausch und die Diskussion im Vordergrund.