Caprioglio, P.; Zu, F.; Wolff, C.M.; Prieto, J.A.M.; Stolterfoht, M.; Becker, P.; Koch, N.; Unold, T.; Rech, B.; Albrecht, S.; Neher, D.: High open circuit voltages in pin-type perovskite solar cells through strontium addition. Sustainable Energy & Fuels 3 (2019), p. 550-563
Open Access Version (externer Anbieter)
The incorporation of even small amounts of strontium (Sr) into lead-based quadruple cation hybrid perovskite solar cells results in a systematic increase of the open circuit voltage (Voc) in pin-type perovskite solar cells. We demonstrate via absolute and transient photoluminescence (PL) experiments how the incorporation of Sr signiﬁcantly reduces the non-radiative recombination losses in the neat perovskite layer. We show that Sr segregates at the perovskite surface, where it induces important changes of morphology and energetics. Notably, the Sr-enriched surface exhibits a wider band gap and a more n-type character, accompanied with signiﬁcantly stronger surface band bending. As a result, we observe a signiﬁcant increase of the quasi-Fermi level splitting in the neat perovskite by reduced surface recombination and more importantly, a strong reduction of losses attributed to non-radiative recombination at the interface to the C60 electron-transporting layer. The resulting solar cells exhibited a Voc of 1.18 V, which could be further improved to nearly 1.23 V through addition of a thin polymer interlayer, bringing the non-radiative voltage loss to only 110 meV. Our work shows that simply adding a small amount of Sr to the precursor solutions induces a beneﬁcial surface modiﬁcation in the perovskite, without requiring any post treatment, resulting in high eﬃciency solar cells with power conversion eﬃciency (PCE) up to 20.3%. Our results demonstrate very high Voc values and eﬃciencies in Sr-containing quadruple cation perovskite pin solar cells and highlight the imperative importance of addressing and minimizing the recombination losses at the interface between perovskite and charge transporting layer.